How do i flash openwrt firmware into my Redmi Ax6000?

Very new to openwrt so i might be using a wrong term or understand properly.
I bought Redmi AX6000 router recently and ive flashed into X-wrt firmware.
when i go into domain using my gateway address, the homepage says X-wrt.
However, this is not the firmware i want to use. so i tried to flash openwrt firmware, it shows error message as following.

the first picture is the error message when i tried to upload a redmi ax6000 (stock layout) 23.05.2 sysupgrade.bin file.

the second picture is the error message when i tried to upload a redmi ax6000 (stock layout) 23.05.2 initramfs-factory.ubi file.

now many would question, why would you try this if you are a beginner? my classmate helped me flash into x-wrt but he said now its your turn to finish the job and doesnt answer my calls.. so im here for help.

any help would be appreciated. have a good day :slight_smile:

Initramfs should NEVER be flashed, it's for running in ram only.

Unless you can find some posts stating cross flashing works, I'd start from scratch, with the stock Xiaomi firmware.

ok i learned that Initramfs should never be flashed.
but frankly i have no idea how to turn my x-wrt to stock xiaomi redmi firmware.

Can't really help you with that part, since we know nothing about X-wrt.

no worries thank you for your help :slight_smile:
i will try to edit my router page into the post

Guys i successfully install openwrt stock layout today
thank you all for help :slight_smile:

How, you're probably not the only user doing this migration..

1 Like

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.