Hello friends, I have an old archer c60 which I had working with openwrt 19 and I wanted to update it, however something went wrong and now my router is bricked, I tried to use tftp with the firmware 21 update but it is unsuccessful...
I opened the router and installed the pins to do it by serial, and now I already have it installed but when I run the serial conection using putty I get all this
I have tried typing 'tpl and enter' quickly but it does not work, I have also tried to type 'f and enter' but once again without success to get in the failsafe mode to be able to use the tftp but nothing happend
I hope someone can help me because I don't know what to do
▒HUK▒▒ѠL)r4KQ9*▒cL▒▒▒W▒▒Pׁ2L▒▒L-▒8'▒0S▒
C▒▒1M-"▒a▒˙l^▒.j
!▒ C!5▒▒6j
▒o▒M▒▒▒,▒▒fK▒UK▒▒▒ X▒▒▒0▒0C!U▒e.W˝ ▒k2▒r▒5B▒▒ X▒▒8▒V▒0▒▒▒U▒e.W˝ &³▒
2▒rj▒l덨J
!U▒e.W˝ ▒▒^W▒ ▒K▒B+▒dJ▒f ▒:▒1▒0▒
▒:±▒fj
▒V▒rW˝ ▒▒tY.2▒r:▒בּ▒T▒a
▒:▒1▒f,j
▒֕rW˝ L&Z▒fK▒b▒Ѡ▒rXk!)
▒:▒1▒▒f,j
*W▒k▒▒i▒▒r
▒:▒1▒▒fNj
!▒+▒hj▒n]J▒▒�f "▒vڬV▒A ▒▒0 "▒vڬV▒▒ ▒▒7C!+▒h▒▒▒Y▒M( ▒▒c▒K▒▒+▒t▒ L&j N▒r]˥nJ▒ ▒5▒K▒▒B▒ѠX8&V▒0▒
▒▒▒: ▒▒▒▒e˥r˵e▒5▒C▒IK sY▒+▒ +▒▒'▒j
▒NY▒▒ Q.▒ sY▒+▒
!▒vX+▒▒X▒e▒▒▒eו▒iW+▒i▒▒▒r
2▒a.▒U▒˝ V
▒d
!▒▒X+▒▒X▒e▒▒i ▒d▒▒▒
2▒▒.▒U▒˝ V
▒d
▒:▒▒gL▒▒0▒▒▒ ,▒ɠ▒▒1LSH▒▒▒mX▒K▒2&▒ C▒D.▒▒˱yK▒꾚ɷ▒!YR
▒e ▒ ▒▒▒:▒▒0N'▒a▒HaK▒2▒▒y5▒t]▒AJ▒AHV5=N▒▒ ▒1▒0C▒▒h▒▒7▒y5▒t]▒AJ▒▒H▒5▒E▒5QAU*▒ ▒▒
u5
PJ5▒7'▒▒sY▒▒n▒I7C▒AJ5▒7'▒▒7▒▒▒Y"▒n▒H:▒gL▒x▒0,▒▒c▒▒ ▒]▒LSHe+▒ ▒:▒:▒▒0N'▒aV▒▒K▒2▒▒y▒▒t]▒AJ▒AHV5=9T▒▒▒0▒1▒▒C▒▒▒▒7▒y▒▒t]▒AJ▒AHV5AE▒5▒AU*▒ ▒j
XK▒2▒▒y5▒t]▒AJ▒A▒▒5=N▒▒1 L▒1▒0C▒▒h▒ɷ▒▒5▒t]▒AJ▒AH▒5▒E▒▒QAU*▒ ▒j
XK▒2▒▒y5▒t]▒AJ▒AH▒5=Ε▒1▒&▒1▒0C▒▒h▒▒7▒y5▒t]▒AJ▒AHV5AE▒▒▒AU*▒ 'j
XKͲ▒▒y▒▒t]▒AJ▒AHV5▒N▒▒ &▒1▒▒C▒▒h▒▒7▒y▒▒t]▒▒J▒A▒▒5AE▒▒▒▒U*▒▒▒j
e+u5
Y
▒ Y+j
*▒i▒0E▒̲2,▒▒
▒▒Y▒▒▒PX.W▒▒o ▒▒
"▒b▒▒殫▒N▒▒ ▒r O▒▒
▒sZ▒PX.W▒▒o
▒▒b▒.▒O▒▒
▒A]▒K▒▒W˝ Z▒xL▒0▒ fX,▒K▒ ▒▒▒ ,▒▒▒ʹtY▒▒ ▒
▒ .ֽn▒5▒#$▒▒a.W˝▒a▒▒Z▒▒i▒a▒x▒0L▒0.▒j
▒▒a▒5Lj ▒▒▒˙l^▒.jjdZ.W▒(▒▒ L&▒0&-▒0▒▒▒&J
!▒ C!▒5:▒j
!U▒e.W˝▒&▒3▒fKUK▒▒▒ X▒8▒0▒0C▒U▒e.W˝▒L&Z▒fK▒UK▒▒ѠX▒8&VA▒▒
2▒▒j▒l▒(J
▒U▒▒.W˝ B^W͠▒K▒B+▒dJ▒▒▒:▒1▒0▒
▒:±֙fj▒▒֕rW˝ &▒tY.▒▒r:▒o▒▒ T▒▒
▒:▒1֙▒▒j
▒֕rW˝ L&Z▒fK▒b▒▒ ▒rXk▒▒
▒:▒1V▒f,j▒*W▒낽i▒▒r
▒:▒1V▒fNj
!▒+▒hj▒n]J▒ �f "▒vڬV N▒r]˥nJ▒ ▒5 K▒5B▒▒ X▒8&VA0▒
A ▒Q0 "▒vZ▒V
E ▒▒7C!+▒h▒▒zY▒M( ▒▒▒▒K▒㫹t▒ L&j
▒+▒h'8j ▒▒U▒˝▒V▒a]▒▒e˥▒˵e▒5▒C▒IK ▒Y.+▒▒▒▒▒: ▒▒▒▒
!▒vX+▒ X▒e▒▒i▒eו▒▒W+▒i▒▒▒r Q.▒ sY▒+▒
!▒vX▒▒ X▒e▒▒i2▒a.▒U▒˝ V▒▒䊑d▒V▒
2▒a.˂U▒˝ V
▒d
▒a▒u▒a▒U▒e▒▒iW+▒i▒▒rY.▒▒mX▒K▒2&▒ C▒D▒▒▒˱yK▒j>▒▒7▒!e ▒H:▒▒L▒x▒0▒0▒ ,▒▒ ▒▒1LS▒e
▒ ▒:▒:▒i0N'▒▒V▒▒K▒2▒▒y▒▒t]▒AJ▒AH▒5=N▒▒ ▒1▒▒C▒▒h▒▒7▒y▒▒t]A▒eA▒V5AE▒5QAU*▒ ▒▒
▒u5▒PJ5▒7'▒▒sY▒n▒▒7C▒AJ5▒7'▒I7▒▒sY"▒nYH:▒gL▒x▒0,▒▒c▒▒ ▒]2L▒He+Ҡ▒:▒:▒i0N'▒▒a▒H▒KͲ▒▒y5▒▒]▒AJ▒AHV5=Ε▒ ▒L▒0C▒▒h▒▒7▒▒5▒t]▒AJ▒A!Y5AE▒5QAU*▒▒h▒▒7▒y5▒t]▒AJ▒A▒V5▒N▒▒1 &▒1▒▒C▒▒h▒▒7▒▒y5▒t]▒AJ▒▒HV5AŨ5QAU*▒ ▒jh▒▒7▒y5▒t]▒AJ▒▒▒V5=N▒u1 &ұ▒0C▒ѡr.▒_▒y5▒t]AJ▒▒▒V5AE▒5QAU*▒ ▒▒
▒+u5
Y
b Y+j
*▒i▒0E8L▒2,t
!▒ѠX+▒kY▒t ▒x▒
▒ ▒▒▒i▒i[XV▒▒▒f▒0▒0r.▒▒
▒R+▒er▒mY'▒ S
▒▒O▒n▒▒ ▒▒u▒4)▒.▒Sj
(▒▒ב: &▒2K▒-L1&▒▒▒▒ U▒5
R+▒e"▒pY'▒S
5▒LZ▒▒ ▒▒▒e
J▒a▒(K▒a▒▒m▒e▒▒dJH DXWSZ▒▒ 1▒▒▒ ! ▒d▒ ▒.Mj
▒d▒▒ͺ▒0▒▒▒0C!▒Q▒▒y▒▒i▒▒ ▒0▒0▒0C! U▒▒V▒n▒e▒k▒m▒▒ ▒▒f▒0▒▒r.▒O▒▒ Uk▒m▒宥nZ▒▒ ▒+▒▒▒. ▒O▒HN
▒ ▒n.V▒▒Zkc▒▒r▒▒t J▒i▒▒
b▒n]▒(X
▒ T˥nb▒n]mYk▒zYʹ ▒▒e. ▒7L▒8j▒0▒0J▒▒r
C▒ŅrW˝▒▒▒▒e
r▒▒▒C▒[ 0.▒00000▒ L▒nux versio▒ ▒.1▒.2▒5 (bui▒der@buildhost) ▒gcc versio▒ 7.5.0 (O▒e▒Wrt ▒▒C▒7.5.▒ r1▒42▒-9ce6▒a9d8d)) #0▒Sat ▒pr 16 13:13:▒2 ▒022▒
[ 0.000000ݠb▒otconsole [ear▒y0]▒e▒able▒
[▒ ▒▒0▒000▒00] CPU▒ revision i▒: 000▒9750 ▒MIPS 74▒c▒
▒[▒ 0.00▒00▒] De▒ermi▒ed physical▒▒AM map:er C▒0 v3▒▒[ 0.00000▒] S▒C: ▒ualcomm Athe▒os Q▒A956X▒▒er▒1 re▒ ▒
[ ▒ 0.000000] memory: ▒40▒0000 @▒00000000 (usabl▒)
[ ▒ 0.0▒0▒00▒ I▒itrd not▒fou▒▒ or▒empt▒ - disabling i▒i▒rd
▒▒ 0▒▒00000▒ Prim▒ry ▒a▒a cac▒e 32k▒, 4-w▒y▒ ▒IPT, cache▒aliases, l▒nesize 32 bytes▒
[ 0.▒00000] Z▒ne▒ra▒ge▒:
[ 0▒0000▒0] Normal ▒[m▒m 0x▒000▒00000000▒0▒-0x0000000▒03ffffff]
[ 0.0▒0000] Mov▒bl▒ ▒one▒▒tar▒ f▒r▒each▒no▒e
[ 0▒000000]▒Ear▒y memory nod▒ ▒anges
[ ▒.000▒00] ▒no▒e ▒: [mem ▒x000000000▒000000-0x0000000▒03▒fffff]
[ ▒.0▒0000] In▒t▒em setup node 0 [me▒ 0▒00▒000000▒000000-0x▒0▒00▒0003ffff▒f]▒
▒ ▒ ▒▒.000▒00] rand▒m:▒get_r▒n▒om_bytes called ▒rom 0x8050374▒ with crng_init=0
[ 0.0▒0000]▒B▒ilt 1 zo▒el▒sts,▒m▒bili▒y g▒ouping on▒ ▒otal pages: 1625▒
[ ▒ 0.▒00000] Ke▒ne▒ command li▒e: console=ttyS0▒115200n▒▒rootf▒t▒p▒=squa▒hfs,jff▒2
[ ▒ 0.00▒00▒] P▒D ▒ash ta▒le entr▒es: 256 (▒rder: -2, 1024 ▒ytes)
[▒ 0.000000] Dentry c▒c▒e ha▒h ta▒le e▒▒ries: ▒1▒2 ▒▒rder: 3, 32768 byte▒
[ ▒▒.0▒0000▒ Inode-c▒che ha▒h table e▒tries:▒4096 (or▒er: 2,▒1▒384 byt▒s)
▒▒ ▒.000▒00] Rea▒back E▒rCt▒ ▒eg▒s▒er=0▒00000▒
[▒ 0.▒0▒0▒0]▒Me▒ory:▒58332K/▒55▒6K▒av▒ilable▒▒4051▒ kernel code, 154▒ r▒d▒ta, 532K r▒dat▒, ▒204K i▒it, ▒12K bss,▒7▒04▒ ▒es▒r▒ed,▒0K cma-r▒se▒ved▒
[ 0.000000] SL▒B: H▒alig▒=32, Or▒er=0-3, M▒nO▒j▒cts▒0, CPUs=1,▒N▒de▒=1▒
▒[ 0.▒00▒0▒] CP▒ clock▒ ▒7▒.000 MHz ▒ ▒0.00▒0▒0]▒NR▒IRQS:▒51
[ ▒0.▒0000▒] clocksou▒c▒: MIPS: mask: 0x▒fffffff ▒ax_c▒cles: ▒xffffffff, ▒a▒_▒dl▒_ns: 49▒22850▒4▒▒s
▒ 0.0▒000▒] ▒ched_▒l▒ck: 32 bits ▒t 38▒MHz, resolutio▒ 2▒s,▒w▒aps ev▒ry 554▒89▒1▒▒ns▒
[ ▒ 0.0▒8229] Calibr▒ting▒delay▒l▒op▒.. 38▒.84 Bog▒MIPS▒(▒pj=1929216)▒
[ 0.074772ݠpid_max▒ d▒fau▒t: ▒2768 mi▒imu▒: 301▒
[▒ 0▒07▒795] Mount-c▒c▒e has▒ table ▒n▒▒ies: 1024 ▒order▒[ 0.0867▒8] M▒unt▒oint-cache hash table▒entries: 102▒ (o▒d▒r: ▒, 4096 ▒ytes▒
[ ▒ ▒.09765▒] cloc▒s▒u▒ce: j▒ff▒e▒: mask: ▒xfffffff▒ ▒ax_cy▒le▒: 0xffffffff▒▒ma▒_idle_ns: ▒911▒604462750▒00 ns
[▒ ▒.10805▒] fute▒ ▒▒sh table▒e▒t▒i▒s: 25▒ (order:▒-1, 3▒72 by▒es▒
▒[ ▒ 0▒▒22083] NET: Regi▒tered pr▒tocol▒family 16u▒syste▒
[ ▒ ▒.129716] PCI h▒s▒ bri▒ge /ahb/p▒▒e▒contr▒l▒e▒@182▒0▒0▒ ranges:
[▒ 0.1▒6▒91]▒ MEM 0▒00▒00▒01▒000▒0▒..0x▒0000▒00▒3f▒f▒ff
▒[ 0▒16▒621] p▒i_bus 0000:00: ro▒t▒bus ▒esource [m▒m 0x12000000-0x▒3ff▒fff]
[ ▒ 0▒1▒2▒05]▒pci_bus▒0▒00:0▒: ▒oo▒ ▒us ▒e▒ource [io ▒0x00▒0]
[ ▒0.1▒8▒6▒] p▒▒_b▒s 0000▒0▒: roo▒ bus▒resour▒e [???▒0▒0000000▒ flags 0x0]▒
[ ▒ ▒▒.185▒2▒]▒▒ci_bus 0▒0▒:▒0: N▒ b▒sn res▒urc▒ ▒ound fo▒[▒ 0▒▒9▒▒70]▒pc▒ 00▒0▒00:▒0.0: BA▒ 0▒ ▒ssign▒▒ [▒em ▒x12▒0▒00▒-0x1▒1f▒fff 64bit]
[▒ 0.2▒49▒6] clockso▒rc▒: ▒w▒tche▒to clocksource ▒IPS
[ ▒ 0.2▒1▒▒4▒ ▒ET:▒Registered p▒o▒oco▒ fami▒y 2
[▒ 0.▒15985]▒IP ▒d▒nt▒ h▒sh ta▒le ▒ntri▒s▒ ▒0▒8 (or▒er: 2, 163▒4▒by▒e▒)
[ ▒ ▒.2▒3470▒ ▒C▒ establ▒sh▒d▒ha▒h table entr▒es: 102▒▒(order:▒0,▒4096 bytes▒
[ ▒▒0.▒308▒2] ▒CP▒b▒▒d ▒as▒ t▒ble e▒▒ri▒s: 1024 (orde▒: 0,▒4096 b▒tes)
[ ▒ ▒.2375▒8] TCP: H▒sh▒tabl▒s c▒n▒igur▒d (▒s▒a▒lis▒ed 10▒4▒b▒nd 1024)
[ ▒0.24440▒] UDP ▒ash▒table ▒ntries:▒2▒6 (o▒der: 0, 40▒6 b▒t▒s)
[ 0.250616] UDP-Lite ▒ash ▒able ▒n▒r▒es▒ ▒56 (ord▒r: ▒, 4▒9▒ bytes)
[ 0.2▒▒414] ▒ET:▒Reg▒ster▒d pr▒t▒col▒family 1
▒ ▒0.264565]▒Cra▒hlog al▒oc▒▒ed▒RA͠at a▒dress 0▒3f000▒0▒
[ ▒ 0.271297] wor▒ingset: tim▒st▒m▒_▒▒t▒=30▒max▒or▒▒r=14 bu▒ket▒ord▒r▒0
[ ▒0.28▒37▒] squa▒▒fs:▒ve▒▒io▒ ▒.▒ (2009▒0▒/31) Ph▒llip L▒ugher
[ ▒ 0.28855▒] jffs2:▒vers▒on▒2.▒ (NAND▒ (S▒MMA▒Y) (LZMA) (▒TIME) (▒MODE▒PRIORI▒Y) (▒) 2001▒2006▒Red▒Hat, I▒c.
[ ▒0.3070▒▒] io sch▒d▒l▒r ▒oo▒ re▒i▒t▒red▒
▒ 0.311220] io▒sch▒▒uler ▒e▒dline r▒giste▒▒d (def▒ult▒
[▒ ▒ 0.3183▒7] pinctrl-sin▒le ▒804002▒pinmu▒:▒5▒4▒pi▒s▒a▒ p▒ ▒8▒4002c size 68▒
[▒ 0.326673▒ Ser▒▒l:▒8250/16▒50 driv▒r, 16▒port▒, ▒▒Q shar▒ng ena▒led▒
▒[▒ ▒ 0▒3▒▒258▒ 18020▒00.u▒r▒: ▒tyS0 at▒MMIO▒0x▒80200▒0 ▒i▒q▒=▒9▒ ▒as▒_▒a▒d =▒1▒625▒0▒ is a 1655▒A
[ 0.348390] console [ttyS0] enabled
[ 0.348390] console [ttyS0] enabled
[ 0.355956] bootconsole [early0] disabled
[ 0.355956] bootconsole [early0] disabled
[ 0.381349] m25p80 spi0.0: s25fl064k (8192 Kbytes)
[ 0.386371] 6 fixed-partitions partitions found on MTD device spi0.0
[ 0.392925] Creating 6 MTD partitions on "spi0.0":
[ 0.397900] 0x000000000000-0x00000001fb00 : "factory-boot"
[ 0.404238] 0x00000001fb00-0x000000020000 : "mac"
[ 0.409787] 0x000000020000-0x000000030000 : "u-boot"
[ 0.415604] 0x000000030000-0x0000007d0000 : "firmware"
[ 0.423857] 2 uimage-fw partitions found on MTD device firmware
[ 0.430022] Creating 2 MTD partitions on "firmware":
[ 0.435179] 0x000000000000-0x000000187d59 : "kernel"
[ 0.440922] 0x000000187d59-0x0000007a0000 : "rootfs"
[ 0.446713] mtd: device 5 (rootfs) set to be root filesystem
[ 0.452613] 1 squashfs-split partitions found on MTD device rootfs
[ 0.459047] 0x000000470000-0x0000007a0000 : "rootfs_data"
[ 0.465300] 0x0000007d0000-0x0000007f0000 : "tplink"
[ 0.471062] 0x0000007f0000-0x000000800000 : "art"
[ 0.816071] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe.
[ 1.499892] switch0: Atheros AR8229 rev. 1 switch registered on mdio-bus.0
[ 1.570402] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
[ 1.580243] eth0: Atheros AG71xx at 0xba000000, irq 5, mode: gmii
[ 1.588778] NET: Registered protocol family 10
[ 1.598125] Segment Routing with IPv6
[ 1.601991] NET: Registered protocol family 17
[ 1.606672] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.620070] 8021q: 802.1Q VLAN Support v1.8
[ 1.970647] ag71xx 19000000.eth: connected to PHY at mdio-bus.0:1f:04 [uid=004dd042, driver=Generic PHY]
[ 1.981243] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode: mii
[ 1.988056] hctosys: unable to open rtc device (rtc0)
[ 1.998603] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[ 2.012588] Freeing unused kernel memory: 1204K
[ 2.017297] This architecture does not have kernel memory protection.
[ 2.464987] random: fast init done
[ 2.661917] init: Console is alive
[ 2.665686] init: - watchdog -
[ 3.698544] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.738047] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.756326] init: - preinit -
[ 4.565167] random: jshn: uninitialized urandom read (4 bytes read)
[ 4.672079] random: jshn: uninitialized urandom read (4 bytes read)
[ 4.814758] random: jshn: uninitialized urandom read (4 bytes read)
[ 5.491704] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.497845] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 6.516142] eth0: link up (1000Mbps/Full duplex)
[ 6.520942] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.527751] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 8.739378] jffs2: notice: (475) jffs2_build_xattr_subsystem: complete building xattr subsystem, 24 of xdatum (3 unchecked, 21 orphan) and 41 of xref (21 dead, 0 orphan) found.
[ 8.757414] mount_root: switching to jffs2 overlay
[ 8.782141] overlayfs: upper fs does not support tmpfile.
[ 8.794570] urandom-seed: Seeding with /etc/urandom.seed
[ 8.891889] eth0: link down
[ 8.912139] procd: - early -
[ 8.915492] procd: - watchdog -
[ 9.537087] procd: - watchdog -
[ 9.540623] procd: - ubus -
[ 9.603220] urandom_read: 5 callbacks suppressed
[ 9.603227] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.616504] random: ubusd: uninitialized urandom read (4 bytes read)
[ 9.624222] procd: - init -
Please press Enter to activate this console.
[ 10.195310] kmodloader: loading kernel modules from /etc/modules.d/*
[ 10.218563] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.237477] Loading modules backported from Linux version v4.19.237-0-ga6e4a1818efa
[ 10.245443] Backport generated by backports.git v4.19.237-1-0-gffb89fd9
[ 10.266892] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.291293] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
[ 10.388668] xt_time: kernel timezone is -0000
[ 10.489161] PPP generic driver version 2.4.2
[ 10.495753] NET: Registered protocol family 24
[ 10.557724] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x56.
[ 10.575930] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 10.582098] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[ 10.598826] urngd: v1.0.2 started.
[ 10.730065] random: crng init done
[ 10.805379] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:00:00.0.txt failed with error -2
[ 10.816288] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 11.074129] firmware ath10k!fwcfg-pci-0000:00:00.0.txt: firmware_loading_store: map pages failed
[ 11.087092] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA9888/hw2.0/ct-firmware-5.bin failed with error -2
[ 11.098459] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 11.454310] firmware ath10k!QCA9888!hw2.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[ 11.464136] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA9888/hw2.0/ct-firmware-2.bin failed with error -2
[ 11.475493] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 11.844387] firmware ath10k!QCA9888!hw2.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[ 11.854213] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA9888/hw2.0/firmware-6.bin failed with error -2
[ 11.865297] ath10k_pci 0000:00:00.0: Falling back to user helper
[ 12.195454] firmware ath10k!QCA9888!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 12.789181] ath10k_pci 0000:00:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000
[ 12.798754] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 12.818779] ath10k_pci 0000:00:00.0: firmware ver 10.4b-ct-9888-fW-13-8c5b2baa2 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 cbf49903
[ 13.182860] ath10k_pci 0000:00:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=20 from ath10k/QCA9888/hw2.0/board-2.bin
[ 13.196946] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id 0:20 crc32 8c9208e2
[ 15.236399] ath10k_pci 0000:00:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 15.244177] ath10k_pci 0000:00:00.0: msdu-desc: 2500 skid: 32
[ 15.274302] ath10k_pci 0000:00:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 15.285600] ath10k_pci 0000:00:00.0: wmi print 'free: 114572 iram: 12804 sram: 29508'
[ 15.494833] ath10k_pci 0000:00:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 15.684830] ieee80211 phy1: Atheros AR9561 Rev:0 mem=0xb8100000, irq=2
[ 15.749805] kmodloader: done loading kernel modules from /etc/modules.d/*
