atm i have this writen in the code
WAN=eth0.2 # change this to your WAN device name
UPRATE=18000 #change this to your kbps upload speed
LAN=eth0.1
DOWNRATE=65000 #change this to about 80% of your download speed (in kbps)
but my actual wan and lan are
wan is br lan and wan is br wan
i read you gys saying not to use br wn or br lan but i dont know why
herere a text that might help
oot@OpenWrt:~# tc -s qdisc
qdisc noqueue 0: dev lo root refcnt 2
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc fq_codel 0: dev eth0 root refcnt 2 limit 10240p flows 1024 quantum 1514 target 5.0ms interval 100.0ms memory_limit 4Mb ecn
Sent 540022 bytes 1389 pkt (dropped 0, overlimits 0 requeues 1)
backlog 0b 0p requeues 1
maxpacket 0 drop_overlimit 0 new_flow_count 0 ecn_mark 0
new_flows_len 0 old_flows_len 0
qdisc noqueue 0: dev br-lan root refcnt 2
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc noqueue 0: dev eth0.1 root refcnt 2
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc noqueue 0: dev br-wan root refcnt 2
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
qdisc noqueue 0: dev eth0.2 root refcnt 2
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
root@OpenWrt:~#
i forgot to as is this ok how it written
echo y | /etc/qosscript.sh
exit 0
or this way
echo y | /etc/qosscript.sh
exit 0