R22628 seems to work fine, except the 100% fan...
Cheers!
1 Like
Can you check LAN port 2 mine seems not to be working only LAN1 and WAN work.
Hi, I've confirmed lan1, lan2 and wan all work on my device. I went to network-interfaces-devices and added eth0 (wan) to the br-lan device and thus all three ethernet interfaces are bridged and all work...
So when you place cable in to LAN2 it detects the connection and gets a DHCP IP?
It does! Lan1, lan2 and wan all work and a dhcp ip address is assigned on all ports. I will just re-check...
Edit - yes, dhcp works on all three interfaces...
1 Like
Thanks so my be my power supply
1 Like
I seem to be having issues although LAN1 works on mine it seems to be running at 100Mbos whilst WAN is running at 1Gbps when it should be 100Mbps,
Can someone test and capture their Slate AX please kernel.log with it booting and then cable be placed in each port 1 by 1.
Thank you.
Hi, all three of my ports are running at 100Mpbs (eth0, eth1 and eth2). I have Slate AXT.
I went through the whole thread and I can't find the firmware download. Can someone provide the link?
Can it be used for both Flint and Slate AX?
https://flint.solidus1983.duckdns.org/?snapshots/
Experimental folder is just that experimental.
There is builds for both devices on there, the flint is done however slate ax needs more work.
Secure Connection Failed
An error occurred during a connection to fint.solidus1983.duckdns.org.
It's FLINT, not FINT (someone missed out the L...)
Oops my bad, lack of sleep trying to get the firmware in a decent state.
Thanks radiomean can you confirm this was happening on the earlier builds ?
I can't without checking. Do you want me to check an earlier build and if so, which one?
Any build in the r225 range would be ideal i can't right now as all my hardware is packaged away as i am away for 1 week.
r22519 flashed. All interfaces eth0 eth1 eth2 work and are 1Gbps...
Just reflashing to r22628 to check...
OK, this is odd. Flashed with r22628 and all interfaces eth0, eth1 and eth2 come up as 1Gbps and all work... Only issue is still the 100% fan.
Only difference is that I am using a different ethernet to USB adaptor...
Hope this is helpful!
Wonder why my LAN1 is 100mbps strange.
so now usb work?