GL-AR300M-b2c-NOR - usbip dont show usb devices

My router: GL-AR300M-b2c-NOR
I want to Use: Usb over IP

I have installed packages
kmod-usb-ohci
usbip-server
usbip-client

I print command: usbip list -l
but I don't see the list of devices

Tell me what could be the problem?

System info: Linux version 4.14.241 (glinet@glinet) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11257-5090152ae3)) #0 Thu Jul 29 19:50:28 2021
Installed Packages:

Summary

alsa-lib - 1.1.8-1
alsa-utils - 1.1.7-1
base-files - 204.6-r11364-ef56c85848
blkid - 2.34-1
block-mount - 2020-05-12-84269037-1
bridge - 1.6-3
busybox - 1.30.1-6
ca-bundle - 20200601-1
ca-certificates - 20200601-1
chat - 2.4.7.git-2019-05-25-3
comgt - 0.32-33
comgt-directip - 0.32-33
comgt-ncm - 0.32-33
curl - 7.66.0-3
ddns-scripts - 2.7.8-14
dnscrypt-proxy - 2018-11-22-f61ca76a-1
dnscrypt-proxy-resolvers - 2018-11-22-f61ca76a-1
dnsmasq-full - 2.80-16.3
dropbear - 2019.78-2
ebtables - 2018-06-27-48cff25d-1
ethtool - 5.2-1
fcgi - 2.4.2-1
firewall - 2019-11-22-8174814a-3
fstools - 2020-05-12-84269037-1
fwtool - 2
getdns - 1.6.0-5
getrandom - 2019-06-16-4df34a4d-4
gl-base-files - 3.0.569-1
gl-base-files-ar - 3.0.569-1
gl-cloud-ui - 3.0.36-1
gl-crond - 3.0.4-1
gl-ddns - 3.0.28-1
gl-firewall - 3.0.5-1
gl-fw - 3.0.29-1
gl-ipv6 - 3.0.27-1
gl-modem - 3.0.181-1
gl-monitor - 3.0.139-1
gl-mqtt - 3.1.64-1
gl-portal - 3.0.27-1
gl-qos-internal - 3.0.38-1
gl-repeater - 3.1.19-1
gl-route-policy - 3.0.56-1
gl-rtty - 1.0.0-2
gl-s2s - 1.0.24-1
gl-sdk - 3.0.681-1
gl-siderouter - 3.0.0-1
gl-software - 3.0.31-1
gl-tertf - 4.0.46-1
gl-traffic - 1.0.5-1
gl-ui - 3.0.854-1
gl-upload - 1.0.46-1
gl-util - 3.0.235-1
gl-vpn - 3.0.136-1
gl-vpn-server - 3.0.136-1
gl-wan-detect - 3.0.1-1
gl-wg - 3.0.99-2
gl-wg-server - 3.0.99-2
gl-wifi-core - 3.0.226-1
hostapd-common - 2019-08-08-ca8c2bd2-7
ip-full - 5.0.0-2.1
ip6tables - 1.8.3-1
ipset - 7.3-1
iptables - 1.8.3-1
iptables-mod-conntrack-extra - 1.8.3-1
iptables-mod-hashlimit - 1.8.3-1
iptables-mod-ipopt - 1.8.3-1
iptables-mod-u32 - 1.8.3-1
iw-full - 5.0.1-1
iwinfo - 2019-10-16-07315b6f-7
jshn - 2020-05-25-66195aee-1
jsonfilter - 2018-02-04-c7e938d6-1
kernel - 4.14.241-1-05fa7e82a071f1ef387d47228067a82c
kmod-ath - 4.14.241+4.19.193-1-1
kmod-ath9k - 4.14.241+4.19.193-1-1
kmod-ath9k-common - 4.14.241+4.19.193-1-1
kmod-cfg80211 - 4.14.241+4.19.193-1-1
kmod-crypto-aead - 4.14.241-1
kmod-crypto-crc32c - 4.14.241-1
kmod-crypto-ecb - 4.14.241-1
kmod-crypto-hash - 4.14.241-1
kmod-crypto-manager - 4.14.241-1
kmod-crypto-null - 4.14.241-1
kmod-crypto-pcompress - 4.14.241-1
kmod-crypto-sha1 - 4.14.241-1
kmod-ebtables - 4.14.241-1
kmod-fs-exfat - 4.14.241+2018-04-17-01c30ad5-2
kmod-fs-ext4 - 4.14.241-1
kmod-fs-ntfs - 4.14.241-1
kmod-fs-vfat - 4.14.241-1
kmod-fuse - 4.14.241-1
kmod-gpio-button-hotplug - 4.14.241-3
kmod-input-core - 4.14.241-1
kmod-ip6tables - 4.14.241-1
kmod-ipt-compat-xtables - 4.14.241+2.14-9
kmod-ipt-conntrack - 4.14.241-1
kmod-ipt-conntrack-extra - 4.14.241-1
kmod-ipt-core - 4.14.241-1
kmod-ipt-hashlimit - 4.14.241-1
kmod-ipt-ipmark - 4.14.241+2.14-9
kmod-ipt-ipopt - 4.14.241-1
kmod-ipt-ipset - 4.14.241-1
kmod-ipt-nat - 4.14.241-1
kmod-ipt-nat6 - 4.14.241-1
kmod-ipt-offload - 4.14.241-1
kmod-ipt-raw - 4.14.241-1
kmod-ipt-u32 - 4.14.241-1
kmod-lib-crc-ccitt - 4.14.241-1
kmod-lib-crc16 - 4.14.241-1
kmod-lib-crc32c - 4.14.241-1
kmod-lib-textsearch - 4.14.241-1
kmod-mac80211 - 4.14.241+4.19.193-1-1
kmod-macvlan - 4.14.241-1
kmod-mii - 4.14.241-1
kmod-mppe - 4.14.241-1
kmod-nf-conntrack - 4.14.241-1
kmod-nf-conntrack-netlink - 4.14.241-1
kmod-nf-conntrack6 - 4.14.241-1
kmod-nf-flow - 4.14.241-1
kmod-nf-ipt - 4.14.241-1
kmod-nf-ipt6 - 4.14.241-1
kmod-nf-nat - 4.14.241-1
kmod-nf-nat6 - 4.14.241-1
kmod-nf-nathelper - 4.14.241-1
kmod-nf-nathelper-extra - 4.14.241-1
kmod-nf-reject - 4.14.241-1
kmod-nf-reject6 - 4.14.241-1
kmod-nfnetlink - 4.14.241-1
kmod-nls-base - 4.14.241-1
kmod-nls-cp437 - 4.14.241-1
kmod-nls-iso8859-1 - 4.14.241-1
kmod-nls-utf8 - 4.14.241-1
kmod-phy-ath79-usb - 4.14.241-1
kmod-ppp - 4.14.241-1
kmod-pppoe - 4.14.241-1
kmod-pppox - 4.14.241-1
kmod-rt2800-lib - 4.14.241+4.19.193-1-1
kmod-rt2800-usb - 4.14.241+4.19.193-1-1
kmod-rt2x00-lib - 4.14.241+4.19.193-1-1
kmod-rt2x00-usb - 4.14.241+4.19.193-1-1
kmod-sched - 4.14.241-1
kmod-sched-connmark - 4.14.241-1
kmod-sched-core - 4.14.241-1
kmod-scsi-core - 4.14.241-1
kmod-slhc - 4.14.241-1
kmod-sound-core - 4.14.241-1
kmod-tun - 4.14.241-1
kmod-udptunnel4 - 4.14.241-1
kmod-udptunnel6 - 4.14.241-1
kmod-usb-acm - 4.14.241-1
kmod-usb-audio - 4.14.241-1
kmod-usb-core - 4.14.241-1
kmod-usb-ehci - 4.14.241-1
kmod-usb-net - 4.14.241-1
kmod-usb-net-cdc-ether - 4.14.241-1
kmod-usb-net-cdc-ncm - 4.14.241-1
kmod-usb-net-huawei-cdc-ncm - 4.14.241-1
kmod-usb-net-ipheth - 4.14.241-1
kmod-usb-net-qmi-wwan - 4.14.241-1
kmod-usb-net-rndis - 4.14.241-1
kmod-usb-net-sierrawireless - 4.14.241-1
kmod-usb-ohci - 4.14.241-1
kmod-usb-serial - 4.14.241-1
kmod-usb-serial-cp210x - 4.14.241-1
kmod-usb-serial-option - 4.14.241-1
kmod-usb-serial-sierrawireless - 4.14.241-1
kmod-usb-serial-wwan - 4.14.241-1
kmod-usb-storage - 4.14.241-1
kmod-usb-storage-uas - 4.14.241-1
kmod-usb-uhci - 4.14.241-1
kmod-usb-wdm - 4.14.241-1
kmod-usb2 - 4.14.241-1
kmod-usbip - 4.14.241-1
kmod-usbip-client - 4.14.241-1
kmod-usbip-server - 4.14.241-1
kmod-wireguard - 4.14.241+1.0.20200611-3
libblkid1 - 2.34-1
libblobmsg-json - 2020-05-25-66195aee-1
libc - 1.1.24-2
libcap - 2.27-1
libcurl4 - 7.66.0-3
libelf1 - 0.177-1
libev - 4.25-1
libevdev - 1.6.0-1
libgcc1 - 7.5.0-2
libgmp10 - 6.1.2-2
libimobiledevice - 1.3.0-2
libip4tc2 - 1.8.3-1
libip6tc2 - 1.8.3-1
libipset13 - 7.3-1
libiwinfo20181126 - 2019-10-16-07315b6f-7
libjson-c2 - 0.12.1-3.1
libjson-script - 2020-05-25-66195aee-1
libminiupnpc - 1.9-1
libmnl0 - 1.0.4-2
libnatpmp - 20150609-1
libncurses6 - 6.1-5
libnetfilter-conntrack3 - 2018-05-01-3ccae9f5-2
libnettle7 - 3.5.1-1
libnfnetlink0 - 1.0.1-3
libnl-tiny - 0.1-5
libopenssl-conf - 1.1.1n-1
libopenssl1.1 - 1.1.1n-1
libpcap1 - 1.9.1-2.1
libpcre - 8.43-1
libplist - 2.2.0-2
libpthread - 1.1.24-2
librt - 1.1.24-2
libsodium - 1.0.18-1
libsqlite3-0 - 3310100-1
libstdcpp6 - 7.5.0-2
libubox20191228 - 2020-05-25-66195aee-1
libubus20210603 - 2021-07-01-38c7fdd8-1
libuci20130104 - 2019-09-01-415f9e48-4
libuclient20160123 - 2020-06-17-51e16ebf-1
libudev-fbsd - 20171216-1
libusb-1.0-0 - 1.0.22-2
libusbmuxd - 2.0.2-1
libustream-openssl20150806 - 2020-03-13-40b563b1-1
libuuid1 - 2.34-1
libwrap - 7.6-2
libxml2 - 2.9.9-3
libxtables12 - 1.8.3-1
libyaml - 0.2.2-1
lighttpd - 1.4.48-2
lighttpd-mod-access - 1.4.48-2
lighttpd-mod-cgi - 1.4.48-2
lighttpd-mod-expire - 1.4.48-2
lighttpd-mod-fastcgi - 1.4.48-2
lighttpd-mod-proxy - 1.4.48-2
logd - 2019-06-16-4df34a4d-4
mqtt - 1.3.1-1
mtd - 24
mudial - 1.0.0-1
mwan3 - 2.8.4-2
netifd - 2021-01-09-753c351b-2
nodogsplash - 1.0.2-3
ntfs-3g - 2017.3.23-2-fuseint
odhcp6c - 2021-01-09-64e1b4e7-16
odhcpd-ipv6only - 2020-05-03-49e4949c-3
openssl-util - 1.1.1n-1
openvpn-openssl - 2.5.2-1
openwrt-keyring - 2021-02-20-49283916-2
opkg - 2021-01-31-c5dccea9-1
ppp - 2.4.7.git-2019-05-25-3
ppp-mod-pppoe - 2.4.7.git-2019-05-25-3
procd - 2020-03-07-09b9bd82-1
relayd - 2020-04-25-f4d759be-1
resolveip - 2
rt2800-usb-firmware - 20190416-1
rtty-openssl - 8.0.0-5
stubby - 0.3.0-1
swconfig - 12
tc - 5.0.0-2.1
terminfo - 6.1-5
ubi-utils - 2.1.1-1
uboot-envtools - 2021.01-10
ubox - 2019-06-16-4df34a4d-4
ubus - 2021-07-01-38c7fdd8-1
ubusd - 2021-07-01-38c7fdd8-1
uci - 2019-09-01-415f9e48-4
uclient-fetch - 2020-06-17-51e16ebf-1
unzip - 6.0-8
uqmi - 2019-06-27-1965c713-7
urandom-seed - 1.0-1
urngd - 2020-01-21-c7f7b6b6-1
usb-modeswitch - 2017-12-19-f40f84c2-2
usbip - 2.0-11
usbip-client - 2.0-11
usbip-server - 2.0-11
usbmuxd - 1.1.1-1
usign - 2020-05-23-f1f65026-1
wireguard - 1.0.20200611-3
wireguard-tools - 1.0.20191226-1
wireless-regdb - 2020.11.20-1
wpa-cli - 2019-08-08-ca8c2bd2-7
wpad-openssl - 2019-08-08-ca8c2bd2-7
wwan - 2014-07-17-1
zlib - 1.2.11-3

Command "cat /proc/devices":

Summary

root@GL-AR300M:/# cat /proc/devices
Character devices:
1 mem
4 ttyS
5 /dev/tty
5 /dev/console
5 /dev/ptmx
10 misc
13 input
14 sound
90 mtd
108 ppp
116 alsa
128 ptm
136 pts
166 ttyACM
180 usb
188 ttyUSB
189 usb_device
252 ttyATH
253 watchdog
254 gpiochip

Block devices:
8 sd
31 mtdblock
65 sd
66 sd
67 sd
68 sd
69 sd
70 sd
71 sd
128 sd
129 sd
130 sd
131 sd
132 sd
133 sd
134 sd
135 sd
254 ubiblock
259 blkext

Command dmesg:

Summary

root@GL-AR300M:/# dmesg
[ 0.000000] Linux version 4.14.241 (glinet@glinet) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11257-5090152ae3)) #0 Thu Jul 29 19:50:28 2021
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[ 0.000000] MIPS: machine is GL.iNet GL-AR300M (NOR)
[ 0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat 805d7aa0, node_mem_map 81007560
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] random: get_random_bytes called from start_kernel+0x98/0x494 with crng_init=0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=132768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 122404K/131072K available (4427K kernel code, 156K rwdata, 1008K rodata, 1244K init, 218K bss, 8668K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 51
[ 0.000000] CPU clock: 650.000 MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5880801374 ns
[ 0.000009] sched_clock: 32 bits at 325MHz, resolution 3ns, wraps every 6607641598ns
[ 0.008255] Calibrating delay loop... 432.53 BogoMIPS (lpj=2162688)
[ 0.074862] pid_max: default: 32768 minimum: 301
[ 0.079934] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.086911] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.098571] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.108994] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.115524] pinctrl core: initialized pinctrl subsystem
[ 0.122238] NET: Registered protocol family 16
[ 0.133872] PCI host bridge /ahb/pcie-controller@180c0000 ranges:
[ 0.140303] MEM 0x0000000010000000..0x0000000013ffffff
[ 0.145855] IO 0x0000000000000000..0x0000000000000000
[ 0.151362] ar724x-pci 180c0000.pcie-controller: PCIe link is down
[ 0.174707] PCI host bridge to bus 0000:00
[ 0.179089] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[ 0.186329] pci_bus 0000:00: root bus resource [io 0x0000]
[ 0.192206] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.199360] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.207730] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.210291] clocksource: Switched to clocksource MIPS
[ 0.216659] NET: Registered protocol family 2
[ 0.221511] IP idents hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.229062] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.236475] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.243200] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.250051] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.256260] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.263154] NET: Registered protocol family 1
[ 0.267774] PCI: CLS 0 bytes, default 32
[ 0.270801] Crashlog allocated RAM at address 0x3f00000
[ 0.277657] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.289599] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.295791] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.316765] io scheduler noop registered
[ 0.320957] io scheduler deadline registered (default)
[ 0.328521] pinctrl-single 1804002c.pinmux: 576 pins at pa b804002c size 72
[ 0.336410] gpio-export gpio-export: 1 gpio(s) exported
[ 0.342693] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.351802] console [ttyS0] disabled
[ 0.355613] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A
[ 0.364760] console [ttyS0] enabled
[ 0.372315] bootconsole [early0] disabled
[ 0.398909] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.403867] 4 fixed-partitions partitions found on MTD device spi0.0
[ 0.410446] Creating 4 MTD partitions on "spi0.0":
[ 0.415404] 0x000000000000-0x000000040000 : "u-boot"
[ 0.421359] 0x000000040000-0x000000050000 : "u-boot-env"
[ 0.427597] 0x000000050000-0x000000ff0000 : "firmware"
[ 0.435825] 2 uimage-fw partitions found on MTD device firmware
[ 0.442006] Creating 2 MTD partitions on "firmware":
[ 0.447138] 0x000000000000-0x0000001d0000 : "kernel"
[ 0.453013] 0x0000001d0000-0x000000fa0000 : "rootfs"
[ 0.458804] mtd: device 4 (rootfs) set to be root filesystem
[ 0.466061] 1 squashfs-split partitions found on MTD device rootfs
[ 0.472526] 0x000000c00000-0x000000fa0000 : "rootfs_data"
[ 0.478919] 0x000000ff0000-0x000001000000 : "art"
[ 0.485269] libphy: Fixed MDIO Bus: probed
[ 0.831391] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe.
[ 1.510681] libphy: ag71xx_mdio: probed
[ 1.800759] mdio-bus.0:1f: Found an AR934X built-in switch
[ 1.806604] libphy: ar7240sw_mdio: probed
[ 1.867931] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
[ 1.877838] eth1: Atheros AG71xx at 0xba000000, irq 5, mode: gmii
[ 1.886148] NET: Registered protocol family 10
[ 1.895465] Segment Routing with IPv6
[ 1.899340] NET: Registered protocol family 17
[ 1.904042] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.917446] 8021q: 802.1Q VLAN Support v1.8
[ 2.262483] ag71xx 19000000.eth: connected to PHY at mdio-bus.0:1f:04 [uid=004dd042, driver=Generic PHY]
[ 2.273161] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: mii
[ 2.288550] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[ 2.303488] Freeing unused kernel memory: 1244K
[ 2.308172] This architecture does not have kernel memory protection.
[ 2.550304] random: fast init done
[ 3.274982] init: Console is alive
[ 3.278732] init: - watchdog -
[ 6.449873] kmodloader: loading kernel modules from /etc/modules-boot.d/

[ 6.863682] usbcore: registered new interface driver usbfs
[ 6.869415] usbcore: registered new interface driver hub
[ 6.875049] usbcore: registered new device driver usb
[ 6.890966] exFAT: Version 1.2.9
[ 6.930768] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.947622] SCSI subsystem initialized
[ 6.957441] ehci-platform: EHCI generic platform driver
[ 6.963166] ehci-platform 1b000000.usb: EHCI Host Controller
[ 6.969038] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1
[ 6.977273] ehci-platform 1b000000.usb: irq 3, io mem 0x1b000000
[ 7.010335] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00
[ 7.017601] hub 1-0:1.0: USB hub found
[ 7.021914] hub 1-0:1.0: 1 port detected
[ 7.029830] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.038406] ohci-platform: OHCI generic platform driver
[ 7.046638] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.058598] usbcore: registered new interface driver usb-storage
[ 7.067415] usbcore: registered new interface driver uas
[ 7.073787] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 7.091767] init: - preinit -
[ 7.690347] usb 1-1: new full-speed USB device number 2 using ehci-platform
[ 7.926812] random: procd: uninitialized urandom read (4 bytes read)
[ 8.369720] random: jshn: uninitialized urandom read (4 bytes read)
[ 8.522007] random: jshn: uninitialized urandom read (4 bytes read)
[ 9.482625] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 10.511482] eth1: link up (1000Mbps/Full duplex)
[ 10.516288] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 12.756136] mount_root: loading kmods from internal overlay
[ 12.842724] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 12.854666] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 14.161910] jffs2: notice: (472) jffs2_build_xattr_subsystem: complete building xattr subsystem, 7 of xdatum (3 unchecked, 4 orphan) and 63 of xref (6 dead, 0 orphan) found.
[ 14.178596] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 14.197850] block: extroot: not configured
[ 14.363319] jffs2: notice: (470) jffs2_build_xattr_subsystem: complete building xattr subsystem, 7 of xdatum (3 unchecked, 4 orphan) and 63 of xref (6 dead, 0 orphan) found.
[ 14.382878] mount_root: loading kmods from internal overlay
[ 14.890714] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 14.904993] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 16.197473] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 16.213203] block: extroot: not configured
[ 16.218663] mount_root: switching to jffs2 overlay
[ 16.304873] overlayfs: upper fs does not support tmpfile.
[ 16.316912] urandom-seed: Seeding with /etc/urandom.seed
[ 16.438932] eth1: link down
[ 16.454487] procd: - early -
[ 16.457584] procd: - watchdog -
[ 17.104095] urandom_read: 5 callbacks suppressed
[ 17.104103] random: jshn: uninitialized urandom read (4 bytes read)
[ 17.200520] procd: - watchdog -
[ 17.204092] procd: - ubus -
[ 17.500526] random: ubusd: uninitialized urandom read (4 bytes read)
[ 17.511378] procd: - init -
[ 21.080746] kmodloader: loading kernel modules from /etc/modules.d/*
[ 21.395922] urngd: v1.0.2 started.
[ 21.497306] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 21.967799] random: crng init done
[ 22.232300] tun: Universal TUN/TAP device driver, 1.6
[ 22.272327] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 22.307805] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 22.610606] Netfilter messages via NETLINK v0.30.
[ 22.628953] ip_set: protocol 6
[ 22.764022] Mirror/redirect action on
[ 22.811786] u32 classifier
[ 22.814600] input device check on
[ 22.818379] Actions configured
[ 22.903717] GACT probability on
[ 22.931729] Simple TC action Loaded
[ 23.020805] fuse init (API version 7.26)
[ 23.077482] usbcore: registered new interface driver cdc_acm
[ 23.083403] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 23.142601] usbcore: registered new interface driver cdc_wdm
[ 23.156378] Loading modules backported from Linux version v4.19.193-0-g1722257b8ece
[ 23.164362] Backport generated by backports.git v4.19.193-1-0-gaa2cc8ea
[ 23.262245] Ebtables v2.0 registered
[ 23.293739] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 23.321414] usbcore: registered new interface driver ipheth
[ 23.655092] ctnetlink v0.93: registering with nfnetlink.
[ 24.156610] usbcore: registered new device driver usbip-host
[ 24.229633] usbcore: registered new interface driver usbserial
[ 24.235838] usbcore: registered new interface driver usbserial_generic
[ 24.242692] usbserial: USB Serial support registered for generic
[ 24.341125] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller
[ 24.347257] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 2
[ 24.354819] vhci_hcd: created sysfs vhci_hcd.0
[ 24.421954] hub 2-0:1.0: USB hub found
[ 24.430568] hub 2-0:1.0: 8 ports detected
[ 24.451053] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller
[ 24.457187] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 3
[ 24.490429] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 24.519512] hub 3-0:1.0: USB hub found
[ 24.525449] hub 3-0:1.0: 8 ports detected
[ 24.553291] wireguard: WireGuard 1.0.20200611 loaded. See www.wireguard.com for information.
[ 24.562094] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved.
[ 24.793179] xt_time: kernel timezone is -0000
[ 24.803498] usbcore: registered new interface driver cdc_ether
[ 24.835898] usbcore: registered new interface driver cdc_ncm
[ 25.037078] usbcore: registered new interface driver cp210x
[ 25.042993] usbserial: USB Serial support registered for cp210x
[ 25.116692] usbcore: registered new interface driver huawei_cdc_ncm
[ 25.367945] PPP generic driver version 2.4.2
[ 25.398439] PPP MPPE Compression module registered
[ 25.432446] NET: Registered protocol family 24
[ 25.444369] usbcore: registered new interface driver qmi_wwan
[ 25.470261] usbcore: registered new interface driver rndis_host
[ 25.578595] usbcore: registered new interface driver sierra
[ 25.584512] usbserial: USB Serial support registered for Sierra USB modem
[ 25.623227] usbcore: registered new interface driver sierra_net
[ 26.113103] usbcore: registered new interface driver snd-usb-audio
[ 26.323237] usbcore: registered new interface driver option
[ 26.329065] usbserial: USB Serial support registered for GSM modem (1-port)
[ 26.419583] usbcore: registered new interface driver rt2800usb
[ 26.508676] ath: EEPROM regdomain: 0x0
[ 26.508686] ath: EEPROM indicates default country code should be used
[ 26.508690] ath: doing EEPROM country->regdmn map search
[ 26.508703] ath: country maps to regdmn code: 0x3a
[ 26.508709] ath: Country alpha2 being used: US
[ 26.508712] ath: Regpair used: 0x3a
[ 26.522123] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 26.523972] ieee80211 phy0: Atheros AR9531 Rev:2 mem=0xb8100000, irq=13
[ 26.624093] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 44.504187] IPv6: ADDRCONF(NETDEV_UP): lo: link is not ready
[ 45.071317] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 46.221296] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 46.263804] eth1: link up (1000Mbps/Full duplex)
[ 46.271369] br-lan: port 1(eth1) entered blocking state
[ 46.276777] br-lan: port 1(eth1) entered disabled state
[ 46.282560] device eth1 entered promiscuous mode
[ 46.350045] br-lan: port 1(eth1) entered blocking state
[ 46.355510] br-lan: port 1(eth1) entered forwarding state
[ 54.781772] br-lan: port 2(wlan0) entered blocking state
[ 54.787270] br-lan: port 2(wlan0) entered disabled state
[ 54.793270] device wlan0 entered promiscuous mode
[ 60.080812] wlan-sta: authenticate with 04:42:1a:7d:d6:38
[ 60.099979] wlan-sta: send auth to 04:42:1a:7d:d6:38 (try 1/3)
[ 60.119284] wlan-sta: authenticated
[ 60.170353] wlan-sta: associate with 04:42:1a:7d:d6:38 (try 1/3)
[ 60.180970] wlan-sta: RX AssocResp from 04:42:1a:7d:d6:38 (capab=0x1411 status=0 aid=28)
[ 60.189542] wlan-sta: associated
[ 60.520467] br-lan: port 2(wlan0) entered blocking state
[ 60.525996] br-lan: port 2(wlan0) entered forwarding state
[ 286.844491] usb 1-1: USB disconnect, device number 2
[ 292.070210] usb 1-1: new high-speed USB device number 3 using ehci-platform
[ 292.289069] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 292.309851] scsi host0: usb-storage 1-1:1.0
[ 294.058536] scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6
[ 294.072274] sd 0:0:0:0: [sda] 7602176 512-byte logical blocks: (3.89 GB/3.63 GiB)
[ 294.094202] sd 0:0:0:0: [sda] Write Protect is off
[ 294.099266] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 294.111642] sd 0:0:0:0: [sda] No Caching mode page found
[ 294.117342] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 294.169594] sda: sda1 sda2 sda3
[ 294.192061] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 305.489962] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 316.314560] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

It appears you are using firmware that is not from the official OpenWrt project.

When using forks/offshoots/vendor-specific builds that are "based on OpenWrt", there may be many differences compared to the official versions (hosted by OpenWrt.org). Some of these customizations may fundamentally change the way that OpenWrt works. You might need help from people with specific/specialized knowledge about the firmware you are using, so it is possible that advice you get here may not be useful.

You may find that the best options are:

  1. Install an official version of OpenWrt, if your device is supported (see https://firmware-selector.openwrt.org).
  2. Ask for help from the maintainer(s) or user community of the specific firmware that you are using.
  3. Provide the source code for the firmware so that users on this forum can understand how your firmware works (OpenWrt forum users are volunteers, so somebody might look at the code if they have time and are interested in your issue).

If you believe that this specific issue is common to generic/official OpenWrt and/or the maintainers of your build have indicated as such, please feel free to clarify.

2 Likes

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.