Firmware Selector has issues regarding Luci?

[DGdodo]

After trying to build my own OpenWrt v24.10.0 (for Generic x86/64) resulting in weird uhttpd issues, I tried the OpenWrt Firmware Selector.
But there are also issues, now regarding Luci, after only adding: nano htpdate kmod-vmxnet3 privoxy

Downloading http://downloads.openwrt.org/releases/24.10.0/packages/x86_64/luci/Packages.sig
Signature check failed.

About this build

Model Generic x86/64
Platform x86/64
Version 24.10.0 (r28427-6df0e3d02a)

I do not know what is wrong here...

Regards,
DGdodo.

[psherman]

Probably this:

Signature check failed after flashing 24.10?

Hi, I flashed OpenWrt 24.10.0 r28427-6df0e3d02a / LuCI openwrt-24.10 branch 25.035.62793~4f7a183 to my mf286d, using the custom builder (adding luci-proto-qmi). after sysupgrade, When doing opkg update i get the following. Downloading https://github.com/4IceG/Modem-extras/raw/main/myrepo/Packages.gz Updated list of available packages in /var/opkg-lists/IceG_repo Downloading https://github.com/4IceG/Modem-extras/raw/main/myrepo/Packages.sig Signature check failed. Remove wrong Signature file. …

[DGdodo]

pshermanm

I got this error earlier with the OpenWrt Firmware Selector, I have other issues with my own v24.10.0 builds.

When i now run the Firmware Selector, all checks passes, only with luci selected, the following occurs:

Collected errors:
 * opkg_install_pkg: Checksum or size mismatch for package liblucihttp-ucode. Either the opkg or the package index are corrupt. Try 'opkg update'.
 * opkg_install_cmd: Cannot install package luci.

I maybe wrong, but luci is default selected at Firmware Selector?
When adding only nano into the build the 'Request Build' ending in this error.

Selecting version 23.05.5 within Firmware Selector works fine.

Regards,
DGdodo,

[LilRedDog]

@DGdodo

Try 'opkg update'

Did you follow the instructions?

[DGdodo]

LilReDog,

I am using the online OpenWrt Firmware Selector.

Try:
Model Generic x86/64
Platform x86/64
Version 24.10.0 (r28427-6df0e3d02a)

Then click: Customize installed packages and/or first boot script
Add for example nano (or nothing) and then click Request Build.

You get the same error.

When Building v23.05.5 all goes without problems, regarding the 'opkg update', which should be done during script build on the website.

Regards,
DGdodo.

[psherman]

@DGdodo

Collected errors:
 * opkg_install_pkg: Checksum or size mismatch for package liblucihttp-ucode. Either the opkg or the package index are corrupt. Try 'opkg update'.
 * opkg_install_cmd: Cannot install package luci.

I got the same errors a few days back...

Upgrade path with AUC from 23.05.5 > 24.10.0

I'm trying to figure out the best upgrade path for my current installation on my RaspberryPi 4 which is seeing a bunch of ASU errors. Currently, 23.05.5 is installed, and was last updated using ASU. I know that ASU has been replaced by OWUT, but the latter isn't available on 23.05.5, so I was hoping that I could get to 24.10.0 with ASU, and then install OWUT once there. I'm also aware of the security issue that was found with with sysupgrade server (and quickly resolved)... am I dealing with an…

There is something wrong with the build bots and things may be out of sync. Should theoretically resolve in time.

[LilRedDog]

Maybe a sticky today?

[DGdodo]

psherman,

Thanks for reply. I'll try tomorrow or coming week.

Regards,
DGdodo

[DGdodo]

The next day all works fine on OpenWrt Firmware Selector!
Thanks to all.

Regards,
DGdodo.

[fkl7834456]

On version 24.10.0, some problem with wpad for firmware-selector.