Finding 802.11r Mobility Domain

Installing and Using OpenWrt
1

I've been having connection issues with a device. Researching solutions I discovered my cable provider's Hitron CODA-4589-RES has 802.11r support enabled.

I'm running a Netgear WAX202 on the network as a dumb AP and realized I don't have 802.11r enabled on it and thought turning it on was good idea.

Here's the rub, instructions say to duplicate the Mobility Domain from other access points... except I cannot find a Mobility Domain on the Hitron gateway. I mean there should be one, right? How do I find it?

2

It is raw in beacons iike seen in iw scan

3

Huh? No idea what any of that means.

4

connect to your openwrt device using ssh, and run the command @brada4 suggested.

1 Like
5

Mobility domain is contained in beacon frames, scanning for access points in vicinity shows domain number in output.

6

I got pages of usage/commands listed. The command suggested produced no result.

7

Please connect to your OpenWrt device using ssh and copy the output of the following commands and post it here using the "Preformatted text </> " button:
grafik
Remember to redact passwords, MAC addresses and any public IP addresses you may have:

ubus call system board
cat /etc/config/network
cat /etc/config/wireless
cat /etc/config/dhcp
cat /etc/config/firewall