Eth0 and eth1 is permanently down on Fitlet2

Installing and Using OpenWrt
1

Hi,

I have installed openwrt-23.05.4-x86-64-generic-ext4-combined.img.gz on an SD-card and I am running it on a Fitlet 2 https://fit-iot.com/web/products/fitlet2/fitlet2-specifications/

It seems to work except for ETH0 and ETH1 which both are permanently down :frowning:

root@OpenWrt:~# lspci -n -n -k
02:00.0 Ethernet controller [0200]: Intel Corporation I211 Gigabit Network Connection [8086:1539] (rev 03)
	Subsystem: Intel Corporation Device [8086:0000]
	Kernel driver in use: igb
03:00.0 Ethernet controller [0200]: Intel Corporation I211 Gigabit Network Connection [8086:1539] (rev 03)
	DeviceName: Onboard - Ethernet
	Subsystem: Intel Corporation Device [8086:0000]
	Kernel driver in use: igb
2

Try to boot snapshot, it may be totally new card which needs some extra bits to work.

3

@brada4 thanks a lot, I must admit I was thinking the Hardware is from 2018 - a snapshot wont solve my problem :blush:

it works perfect on snapshot:

image
image807×182 19.2 KB

My question now is if there is something I can do to make it work in the next release ?

Again thanks @brada4 :pray:

4

It should work in the next release.

1 Like