Engenius EAP600 OpenWrt flashing procedure

nama · June 26, 2022, 6:33am

Hi,

I have a Senao board Engenius EAP600 with latest firmware from Engenius. After researching online and reading openWRT forums, I should flash using the procedure below.

Enable SSH guide https://gist.github.com/darconeous/b24cdaa853a8f35162f2f8e3a3050149
Trigger the OEM failsafe image via SSH https://openwrt.org/toh/senao/failsafe
Flash openWRT via GUI

Please correct me if i wrong, thanks for your time.

frollic · June 27, 2022, 7:27am

https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=6c98edaae20ac1dd0364963aadeecb022f6a80a1

tassapan · June 27, 2022, 9:45am

Current 21.02 and 22.03 build need to be flashed via failsafe mode.

Borromini · June 27, 2022, 10:26am

Maybe @mpratt14 can chime in? If what worked for him when porting now doesn't for you, maybe newer vendor firmware does things a bit differently.

nama · July 17, 2022, 4:58am

Firmware upgrade to openwrt-21.02.3-ath79-generic-engenius_eap600-squashfs-factory.bin via failsafe mode

Everything went well, thx for everyone's support, awesome!!

system · July 27, 2022, 4:58am

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.