Enabling integrated adapter + USB Wi-Fi adapter for Raspberry pi 4 B simultaneously does not work (after upgrading to latest current)

Installing and Using OpenWrt
1

As already discussed here: Enabling integrated adapter + USB Wi-Fi adapter for Raspberry pi 4 B simultaneously does not work - #12 by swanson the integrated wifi again stopped working after doing /bin/rpi-sysup-online.sh -R current

WIFI config


config wifi-device 'radio0'
        option type 'mac80211'
        option path 'scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb2/2-1/2-1:1.0'
        option cell_density '0'
        option band '5g'
        option htmode 'VHT80'
        option channel 'auto'
        option country 'DE'
        option disabled '0'
        option log_level '4'

config wifi-iface 'default_radio0'
        option device 'radio0'
        option network 'lan'
        option mode 'ap'
        option encryption 'psk2'
        option ssid 'WIFI5'
        option key 'SECRET_PASSWORD'

config wifi-device 'radio1'
        option type 'mac80211'
        option path 'platform/soc/fe300000.mmcnr/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'
        option band '2g'
        option cell_density '0'
        option country 'DE'
        option channel 'auto'
        option legacy_rates '1'
        option log_level '4'

config wifi-iface 'default_radio1'
        option device 'radio1'
        option network 'lan'
        option mode 'ap'
        option encryption 'psk2'
        option wmm '0'
        option ssid 'WIFI'
        option key 'SECRET_PASSWORD'

rpi-support.sh; uci show wireless; iw reg get

################################# root-dev: /dev/mmcblk0p2:07022009-02 boot-dev: /dev/mmcblk0p1
root@boot: PARTUUID=07022009-02
root@cmdline: PARTUUID=07022009-02
################################## 4B 1.4 2GB Sony_UK b03114
############ buildid:r18370-df9a62a085 localversion:3.5.317-15 files:6147ed173 variant:fullest
############ fwV:Feb162021 vlV:000138a1
############ fwWIFI: Firmware: BCM4345/6 wl0: Mar 23 2020 02:20:01 version 7.45.206 (r725000 CY) FWID 01-febaba43
raspberrypi-firmware: 2021-12-01T11:40:59, be18b6271a0f99f896fc81249da5da6658422558
################################# wrt.ini brief
ENABLEDSERVICES="banip adblock dbus modemanager" #[fboot/upgrade] enable+start
LUCIQRCODES=1
WIFIAUTOSETUP=1
POWERPROFILE="quick"
RPI_EEPROM_CONFIG_HOOK_FILE_RECOMMENDED="/etc/custom/4-model-b/eeprom.config.recommended"
RPI4CMDLINEOPTS="fsckparts"
ROOTFSEXPAND=1
#################################
  UPTIME: 13:43:3912 min,  0.44, 0.32, 0.17
   DISKS: 2%:/ 0%:/tmp 40%:/boot 
################################# hardware info
Revision        : b03114
Serial          : 10000000e12648b2
Model           : Raspberry Pi 4 Model B Rev 1.4
################################# cmdline.txt
console=serial0,115200 console=tty1 root=PARTUUID=07022009-02 rootfstype=squashfs,ext4 rootwait fsckparts
################################# config.txt
dtparam=sd_poll_once
#################################
BOOTORDER: 
### uptime:  13:43:39 up 12 min,  load average: 0.44, 0.32, 0.17
### network CT:146 LP:29
### Mem: 278620K used, 1623020K free, 3400K shrd, 5612K buff, 162516K cached
### CPU:   0% usr   2% sys   0% nic  97% idle   0% io   0% irq   0% sirq
### Time       Temp     CPU     Core         Health           Vcore    PMIC
### 13:43:40  29.2'C  1500MHz  500MHz  00000000000000000000  0.8600V  34.5'C
SCALING:ondemand thresh:21 min:1100000 max:1500000 cur:1500000 TIME:1100000:58371 1200000:433 1300000:436 1400000:321 1500000:9069 
################################# opkg-repos
/etc/opkg/customfeeds.conf:src/gz git_core https://github.com/wulfy23/rpi4-opkg/raw/master/r18370-df9a62a085/core
/etc/opkg/customfeeds.conf:src/gz git_base https://github.com/wulfy23/rpi4-opkg/raw/master/r18370-df9a62a085/base
/etc/opkg/customfeeds.conf:src/gz git_luci https://github.com/wulfy23/rpi4-opkg/raw/master/r18370-df9a62a085/luci
/etc/opkg/distfeeds.conf:src/gz openwrt_kmods http://downloads.openwrt.org/snapshots/targets/bcm27xx/bcm2711/kmods/
/etc/opkg/distfeeds.conf:src/gz openwrt_packages http://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a72/packages
/etc/opkg/distfeeds.conf:src/gz openwrt_routing http://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a72/routing
/etc/opkg/distfeeds.conf:src/gz openwrt_telephony http://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a72/telephony
########################################## GPIO
gpiochip0: GPIOs 0-57, parent: platform/fe200000.gpio, pinctrl-bcm2711:
 gpio-0   (ID_SDA              )
 gpio-1   (ID_SCL              )
 gpio-2   (SDA1                )
 gpio-3   (SCL1                )
 gpio-4   (GPIO_GCLK           )
 gpio-5   (GPIO5               )
 gpio-6   (GPIO6               )
 gpio-7   (SPI_CE1_N           )
 gpio-8   (SPI_CE0_N           )
 gpio-9   (SPI_MISO            )
 gpio-10  (SPI_MOSI            )
 gpio-11  (SPI_SCLK            )
 gpio-12  (GPIO12              )
 gpio-13  (GPIO13              )
 gpio-14  (TXD1                )
 gpio-15  (RXD1                )
 gpio-16  (GPIO16              )
 gpio-17  (GPIO17              )
 gpio-18  (GPIO18              )
 gpio-19  (GPIO19              )
 gpio-20  (GPIO20              )
 gpio-21  (GPIO21              )
 gpio-22  (GPIO22              )
 gpio-23  (GPIO23              )
 gpio-24  (GPIO24              )
 gpio-25  (GPIO25              )
 gpio-26  (GPIO26              )
 gpio-27  (GPIO27              )
 gpio-28  (RGMII_MDIO          )
 gpio-29  (RGMIO_MDC           )
 gpio-30  (CTS0                )
 gpio-31  (RTS0                )
 gpio-32  (TXD0                )
 gpio-33  (RXD0                )
 gpio-34  (SD1_CLK             )
 gpio-35  (SD1_CMD             )
 gpio-36  (SD1_DATA0           )
 gpio-37  (SD1_DATA1           )
 gpio-38  (SD1_DATA2           )
 gpio-39  (SD1_DATA3           )
 gpio-40  (PWM0_MISO           )
 gpio-41  (PWM1_MOSI           )
 gpio-42  (STATUS_LED_G_CLK    |led0                ) out lo 
 gpio-43  (SPIFLASH_CE_N       )
 gpio-44  (SDA0                )
 gpio-45  (SCL0                )
 gpio-46  (RGMII_RXCLK         )
 gpio-47  (RGMII_RXCTL         )
 gpio-48  (RGMII_RXD0          )
 gpio-49  (RGMII_RXD1          )
 gpio-50  (RGMII_RXD2          )
 gpio-51  (RGMII_RXD3          )
 gpio-52  (RGMII_TXCLK         )
 gpio-53  (RGMII_TXCTL         )
 gpio-54  (RGMII_TXD0          )
 gpio-55  (RGMII_TXD1          )
 gpio-56  (RGMII_TXD2          )
 gpio-57  (RGMII_TXD3          )

gpiochip1: GPIOs 504-511, parent: platform/soc:firmware:gpio, raspberrypi-exp-gpio, can sleep:
 gpio-504 (BT_ON               )
 gpio-505 (WL_ON               )
 gpio-506 (PWR_LED_OFF         |led1                ) out hi ACTIVE LOW
 gpio-507 (GLOBAL_RESET        )
 gpio-508 (VDD_SD_IO_SEL       |vdd-sd-io           ) out hi 
 gpio-509 (CAM_GPIO            )
 gpio-510 (SD_PWR_ON           |sd_vcc_reg          ) out hi 
 gpio-511 (SD_OC_N             )
################################# interface-report
############### lo [ok]  yes 
############### eth0 [ok] bcmgenet yes 1000Mb/s
############### eth1 [ok] r8152 yes 1000Mb/s
############### br-lan [ok] bridge yes 1000Mb/s
############### wlan0 [ok] mt76x2u yes 
################################# packages-restore-actions
################################# packages-restored-RAWDIRECT
################################################ firstboot norun 202112221250
################################################ firstboot norun 202112221250
################################# autorestore-running-RAWDIRECT
opkg install --force-checksum btrfs-progs #opK-R
opkg install --force-checksum containerd #opK-R
opkg install --force-checksum docker #opK-R
opkg install --force-checksum docker-compose #opK-R
opkg install --force-checksum dockerd #opK-R
opkg install --force-checksum findutils-find #opK-R
opkg install --force-checksum findutils-locate #opK-R
opkg install --force-checksum kmod-br-netfilter #opK-R
opkg install --force-checksum kmod-dax #opK-R
opkg install --force-checksum kmod-dm #opK-R
opkg install --force-checksum kmod-fs-btrfs #opK-R
opkg install --force-checksum kmod-keys-encrypted #opK-R
opkg install --force-checksum kmod-keys-trusted #opK-R
opkg install --force-checksum kmod-lib-lzo #opK-R
opkg install --force-checksum kmod-lib-raid6 #opK-R
opkg install --force-checksum kmod-lib-xor #opK-R
opkg install --force-checksum kmod-lib-zlib-deflate #opK-R
opkg install --force-checksum kmod-lib-zstd #opK-R
opkg install --force-checksum kmod-mt76-core #opK-R
opkg install --force-checksum kmod-mt76-usb #opK-R
opkg install --force-checksum kmod-mt76x02-common #opK-R
opkg install --force-checksum kmod-mt76x02-usb #opK-R
opkg install --force-checksum kmod-mt76x2-common #opK-R
opkg install --force-checksum kmod-mt76x2u #opK-R
opkg install --force-checksum kmod-nf-ipvs #opK-R
opkg install --force-checksum kmod-random-core #opK-R
opkg install --force-checksum kmod-tpm #opK-R
opkg install --force-checksum libdevmapper #opK-R
opkg install --force-checksum libnetwork #opK-R
opkg install --force-checksum libseccomp #opK-R
opkg install --force-checksum libwebsockets-full #opK-R
opkg install --force-checksum libyaml #opK-R
opkg install --force-checksum luci-app-dockerman #opK-R
opkg install --force-checksum luci-lib-docker #opK-R
opkg install --force-checksum python3-attrs #opK-R
opkg install --force-checksum python3-bcrypt #opK-R
opkg install --force-checksum python3-cached-property #opK-R
opkg install --force-checksum python3-cryptography #opK-R
opkg install --force-checksum python3-distro #opK-R
opkg install --force-checksum python3-docker #opK-R
opkg install --force-checksum python3-dockerpty #opK-R
opkg install --force-checksum python3-docopt #opK-R
opkg install --force-checksum python3-dotenv #opK-R
opkg install --force-checksum python3-jsonschema #opK-R
opkg install --force-checksum python3-paramiko #opK-R
opkg install --force-checksum python3-pyrsistent #opK-R
opkg install --force-checksum python3-texttable #opK-R
opkg install --force-checksum python3-websocket-client #opK-R
opkg install --force-checksum python3-yaml #opK-R
opkg install --force-checksum runc #opK-R
opkg install --force-checksum tini #opK-R
opkg install --force-checksum ttyd #opK-R
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.path='scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb2/2-1/2-1:1.0'
wireless.radio0.cell_density='0'
wireless.radio0.band='5g'
wireless.radio0.htmode='VHT80'
wireless.radio0.channel='auto'
wireless.radio0.country='DE'
wireless.radio0.disabled='0'
wireless.radio0.log_level='4'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.encryption='psk2'
wireless.default_radio0.ssid='WLAN5'
wireless.default_radio0.key='SECRET_PASSWORD'
wireless.radio1=wifi-device
wireless.radio1.type='mac80211'
wireless.radio1.path='platform/soc/fe300000.mmcnr/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'
wireless.radio1.band='2g'
wireless.radio1.cell_density='0'
wireless.radio1.country='DE'
wireless.radio1.channel='auto'
wireless.radio1.legacy_rates='1'
wireless.radio1.log_level='4'
wireless.default_radio1=wifi-iface
wireless.default_radio1.device='radio1'
wireless.default_radio1.network='lan'
wireless.default_radio1.mode='ap'
wireless.default_radio1.encryption='psk2'
wireless.default_radio1.wmm='0'
wireless.default_radio1.ssid='WLAN'
wireless.default_radio1.key='SECRET_PASSWORD'
global
country DE: DFS-ETSI
        (2400 - 2483 @ 40), (N/A, 20), (N/A)
        (5150 - 5250 @ 80), (N/A, 23), (N/A), NO-OUTDOOR, AUTO-BW
        (5250 - 5350 @ 80), (N/A, 20), (0 ms), NO-OUTDOOR, DFS, AUTO-BW
        (5470 - 5725 @ 160), (N/A, 26), (0 ms), DFS
        (5725 - 5875 @ 80), (N/A, 13), (N/A)
        (5945 - 6425 @ 160), (N/A, 23), (N/A), NO-OUTDOOR, AUTO-BW
        (57000 - 66000 @ 2160), (N/A, 40), (N/A)

phy#1
country 99: DFS-UNSET
        (2402 - 2482 @ 40), (6, 20), (N/A)
        (2474 - 2494 @ 20), (6, 20), (N/A)
        (5140 - 5360 @ 160), (6, 20), (N/A)
        (5460 - 5860 @ 160), (6, 20), (N/A)

logread wifi

Wed Dec 22 13:47:23 2021 daemon.notice hostapd: wlan1: ACS-STARTED
Wed Dec 22 13:47:24 2021 daemon.notice netifd: Wireless device 'radio0' is now up
Wed Dec 22 13:47:24 2021 daemon.notice netifd: Wireless device 'radio1' is now up
Wed Dec 22 13:47:25 2021 daemon.info [5734]: <info>  [base-manager] couldn't check support for device '/sys/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb2/2-1': not supported by any plugin
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: ACS: Survey is missing channel time
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: ACS: Survey is missing RX and busy time (at least one is required)
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: wlan1: ACS-COMPLETED freq=2412 channel=1
Wed Dec 22 13:47:32 2021 daemon.err hostapd: Failed to initialize QoS Map
Wed Dec 22 13:47:32 2021 daemon.warn hostapd: wlan1: Could not connect to kernel driver
Wed Dec 22 13:47:32 2021 daemon.err hostapd: Interface initialization failed
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: wlan1: interface state ACS->DISABLED
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: wlan1: AP-DISABLED
Wed Dec 22 13:47:32 2021 daemon.err hostapd: ACS: Possibly channel configuration is invalid, please report this along with your config file.
Wed Dec 22 13:47:32 2021 daemon.err hostapd: ACS: Failed to start
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: wlan1: AP-DISABLED
Wed Dec 22 13:47:32 2021 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan1 wasn't started
Wed Dec 22 13:47:32 2021 daemon.notice hostapd: nl80211: deinit ifname=wlan1 disabled_11b_rates=0
Wed Dec 22 13:47:32 2021 kern.info kernel: [  955.201322] device wlan1 left promiscuous mode
Wed Dec 22 13:47:32 2021 kern.info kernel: [  955.205814] br-lan: port 3(wlan1) entered disabled state
Wed Dec 22 13:47:33 2021 daemon.notice hostapd: wlan1: interface state DISABLED->DISABLED
2

DMESG

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[    0.000000] Linux version 5.10.87 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r18370-df9a62a085) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Fri Dec 17 20:06:34 2021
[    0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.4
[    0.000000] Reserved memory: created CMA memory pool at 0x000000002ac00000, size 64 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
[    0.000000]   DMA32    [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000003b3fffff]
[    0.000000]   node   0: [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[    0.000000] On node 0 totalpages: 504832
[    0.000000]   DMA zone: 3792 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 242688 pages, LIFO batch:63
[    0.000000]   DMA32 zone: 4096 pages used for memmap
[    0.000000]   DMA32 zone: 262144 pages, LIFO batch:63
[    0.000000] percpu: Embedded 21 pages/cpu s45336 r8192 d32488 u86016
[    0.000000] pcpu-alloc: s45336 r8192 d32488 u86016 alloc=21*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: Spectre-v2
[    0.000000] CPU features: detected: Spectre-v4
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 496944
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 smsc95xx.macaddr=E4:5F:01:3B:09:72 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyAMA0,115200 console=tty1 root=PARTUUID=07022009-02 rootfstype=squashfs,ext4 rootwait fsckparts
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
[    0.000000] Memory: 1835656K/2019328K available (7806K kernel code, 892K rwdata, 2012K rodata, 448K init, 548K bss, 118136K reserved, 65536K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] random: get_random_bytes called from start_kernel+0x2d0/0x454 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000184] Console: colour dummy device 80x25
[    0.000484] printk: console [tty1] enabled
[    0.000521] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[    0.000547] pid_max: default: 32768 minimum: 301
[    0.000707] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.000752] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.001398] cgroup: Disabling memory control group subsystem
[    0.002337] rcu: Hierarchical SRCU implementation.
[    0.002510] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.003033] smp: Bringing up secondary CPUs ...
[    0.003442] Detected PIPT I-cache on CPU1
[    0.003510] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[    0.003990] Detected PIPT I-cache on CPU2
[    0.004030] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[    0.004492] Detected PIPT I-cache on CPU3
[    0.004532] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[    0.004606] smp: Brought up 1 node, 4 CPUs
[    0.004665] SMP: Total of 4 processors activated.
[    0.004679] CPU features: detected: 32-bit EL0 Support
[    0.004694] CPU features: detected: CRC32 instructions
[    0.004765] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[    0.004783] CPU: All CPU(s) started at EL2
[    0.004815] alternatives: patching kernel code
[    0.012985] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.013034] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.014822] pinctrl core: initialized pinctrl subsystem
[    0.015882] NET: Registered protocol family 16
[    0.017464] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.017709] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.018193] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.018597] thermal_sys: Registered thermal governor 'step_wise'
[    0.018912] cpuidle: using governor ladder
[    0.018953] cpuidle: using governor menu
[    0.019172] ASID allocator initialised with 65536 entries
[    0.019257] Serial: AMBA PL011 UART driver
[    0.031650] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[    0.049996] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-12-01T11:40:59, variant start
[    0.060006] raspberrypi-firmware soc:firmware: Firmware hash is be18b6271a0f99f896fc81249da5da6658422558
[    0.087781] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[    0.089700] SCSI subsystem initialized
[    0.089855] usbcore: registered new interface driver usbfs
[    0.089899] usbcore: registered new interface driver hub
[    0.089941] usbcore: registered new device driver usb
[    0.090110] usb_phy_generic phy: supply vcc not found, using dummy regulator
[    0.091315] clocksource: Switched to clocksource arch_sys_counter
[    0.094591] NET: Registered protocol family 2
[    0.094935] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.096671] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.096712] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.096833] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.097105] TCP: Hash tables configured (established 16384 bind 16384)
[    0.097304] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.097348] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.097535] NET: Registered protocol family 1
[    0.097573] PCI: CLS 0 bytes, default 64
[    0.098738] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    0.102681] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.169232] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.171404] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[    0.171440] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[    0.171478] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[    0.171516] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x007fffffff -> 0x0400000000
[    0.243403] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[    0.243601] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[    0.243623] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.243643] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[    0.243697] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[    0.243776] pci 0000:00:00.0: PME# supported from D0 D3hot
[    0.247429] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    0.247510] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.247691] pci 0000:01:00.0: PME# supported from D0 D3hot
[    0.251137] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[    0.251160] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[    0.251220] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.251236] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
[    0.251445] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[    0.251572] pcieport 0000:00:00.0: PME: Signaling with IRQ 46
[    0.251818] pcieport 0000:00:00.0: AER: enabled with IRQ 46
[    0.252239] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver.
[    0.252268] bcm2708_fb: probe of soc:fb failed with error -2
[    0.254488] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    0.255359] iproc-rng200 fe104000.rng: hwrng registered
[    0.255485] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    0.255536] random: fast init done
[    0.255914] random: crng init done
[    0.255925] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[    0.256126] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.262688] brd: module loaded
[    0.265916] loop: module loaded
[    0.266576] Loading iSCSI transport class v2.0-870.
[    0.268239] libphy: Fixed MDIO Bus: probed
[    0.268668] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[    0.281343] libphy: bcmgenet MII bus: probed
[    0.361373] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[    0.409609] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    0.409646] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    0.410178] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000c0000000890
[    0.410864] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    0.410886] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.410904] usb usb1: Product: xHCI Host Controller
[    0.410918] usb usb1: Manufacturer: Linux 5.10.87 xhci-hcd
[    0.410931] usb usb1: SerialNumber: 0000:01:00.0
[    0.411265] hub 1-0:1.0: USB hub found
[    0.411355] hub 1-0:1.0: 1 port detected
[    0.411793] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    0.411815] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    0.411839] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    0.412032] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    0.412052] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.412068] usb usb2: Product: xHCI Host Controller
[    0.412082] usb usb2: Manufacturer: Linux 5.10.87 xhci-hcd
[    0.412095] usb usb2: SerialNumber: 0000:01:00.0
[    0.412397] hub 2-0:1.0: USB hub found
[    0.412441] hub 2-0:1.0: 4 ports detected
[    0.413215] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.413308] dwc_otg: FIQ enabled
[    0.413314] dwc_otg: NAK holdoff enabled
[    0.413319] dwc_otg: FIQ split-transaction FSM enabled
[    0.413326] Module dwc_common_port init
[    0.413603] usbcore: registered new interface driver uas
[    0.413670] usbcore: registered new interface driver usb-storage
[    0.413747] mousedev: PS/2 mouse device common for all mice
[    0.414254] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    0.415656] sdhci: Secure Digital Host Controller Interface driver
[    0.415675] sdhci: Copyright(c) Pierre Ossman
[    0.416034] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[    0.416341] Error: Driver 'sdhost-bcm2835' is already registered, aborting...
[    0.416358] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.424284] NET: Registered protocol family 10
[    0.424788] Segment Routing with IPv6
[    0.424825] NET: Registered protocol family 17
[    0.424848] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    0.424856] 8021q: 802.1Q VLAN Support v1.8
[    0.425107] Key type ._fscrypt registered
[    0.425114] Key type .fscrypt registered
[    0.425119] Key type fscrypt-provisioning registered
[    0.427817] uart-pl011 fe201000.serial: there is not valid maps for state default
[    0.427892] uart-pl011 fe201000.serial: cts_event_workaround enabled
[    0.427952] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 21, base_baud = 0) is a PL011 rev2
[    0.711308] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    0.711487] printk: console [ttyAMA0] enabled
[    0.893848] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[    0.898664] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    0.904660] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    0.904663] usb 1-1: Product: USB2.0 Hub
[    0.905644] hub 1-1:1.0: USB hub found
[    0.914392] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    0.921261] hub 1-1:1.0: 4 ports detected
[    0.924753] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[    1.041724] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    1.070514] of_cfs_init
[    1.113083] usb 2-1: New USB device found, idVendor=0e8d, idProduct=7612, bcdDevice= 1.00
[    1.115455] of_cfs_init: OK
[    1.118468] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[    1.122192] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.147289] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.153989] usb 2-1: Product: 802.11ac WLAN
[    1.153992] usb 2-1: Manufacturer: MediaTek Inc.
[    1.153995] usb 2-1: SerialNumber: 000000000
[    1.161558] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.216355] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
[    1.220203] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.225245] mmcblk0: mmc0:aaaa SP32G 29.7 GiB
[    1.230525] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.233421]  mmcblk0: p1 p2
[    1.237333] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.321492] usb 2-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[    1.381242] mmc1: new high speed SDIO card at address 0001
[    1.412402] usb 2-2: New USB device found, idVendor=2357, idProduct=0601, bcdDevice=30.00
[    1.663257] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    1.663260] usb 2-2: Product: USB 10/100/1000 LAN
[    1.663264] usb 2-2: Manufacturer: TP-LINK
[    1.679173] usb 2-2: SerialNumber: 000001000000
[    1.693521] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
[    1.701037] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    1.708127] Freeing unused kernel memory: 448K
[    1.731415] Run /sbin/init as init process
[    1.735514]   with arguments:
[    1.735519]     /sbin/init
[    1.735524]     fsckparts
[    1.735528]   with environment:
[    1.735532]     HOME=/
[    1.735537]     TERM=linux
[    1.783671] init: Console is alive
[    1.787235] init: - watchdog -
[    2.113866] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    2.136148] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.145604] ehci-fsl: Freescale EHCI Host controller driver
[    2.151746] ehci-platform: EHCI generic platform driver
[    2.160879] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.167547] ohci-platform: OHCI generic platform driver
[    2.175469] uhci_hcd: USB Universal Host Controller Interface driver
[    2.186025] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    2.193910] init: - preinit -
[    2.266378] 79_move_config> BOOTPART: /dev/mmcblk0p1
[    2.486559] fsckparts bootpart:/dev/mmcblk0p1 [clean]
[    2.614075] fsckparts rootfspart:/dev/mmcblk0p2 [clean]
[    2.669179] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[    2.678287] bcmgenet fd580000.ethernet eth0: Link is Down
[    6.763915] mount_root: mounting /dev/root
[    6.771690] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    6.777255] mount_root: loading kmods from internal overlay
[    6.804758] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[    6.813107] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[    6.863638] block: attempting to load /etc/config/fstab
[    6.871651] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[    6.879865] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.883708] block: extroot: device not present, retrying in 5 seconds
[   11.914762] block: extroot: cannot find device with UUID 061525fe-9ae7-46a0-927d-d33c64c030aa
[   11.946343] 79_move_config> BOOTPART: /dev/mmcblk0p1 /boot/sysupgrade.tgz [nope]
[   11.956578] urandom-seed: Seeding with /etc/urandom.seed
[   11.993358] bcmgenet fd580000.ethernet eth0: Link is Down
[   12.002866] procd: - early -
[   12.005850] procd: - watchdog -
[   12.539485] procd: - watchdog -
[   12.542821] procd: - ubus -
[   12.596830] procd: - init -
[   12.602339] uart-pl011 fe201000.serial: no DMA platform data
[   14.281495] kmodloader: loading kernel modules from /etc/modules.d/*
[   14.304713] NET: Registered protocol family 38
[   14.325561] Key type cifs.idmap registered
[   14.349270] tun: Universal TUN/TAP device driver, 1.6
[   14.360795] ipip: IPv4 and MPLS over IPv4 tunneling driver
[   14.370989] l2tp_core: L2TP core driver, V2.0
[   14.376053] l2tp_netlink: L2TP netlink interface
[   14.383555] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[   14.393818] gre: GRE over IPv4 demultiplexor driver
[   14.399429] ip_gre: GRE over IPv4 tunneling driver
[   14.408034] ip6_gre: GRE over IPv6 tunneling driver
[   14.441791] cryptodev: driver 1.12 loaded.
[   14.451644] i2c /dev entries driver
[   14.467478] hid: raw HID events driver (C) Jiri Kosina
[   14.473407] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[   14.487137] GACT probability on
[   14.490950] Mirror/redirect action on
[   14.499159] u32 classifier
[   14.501905]     input device check on
[   14.505564]     Actions configured
[   14.518215] Simple TC action Loaded
[   14.531532] fuse: init (API version 7.32)
[   14.562522] usbcore: registered new interface driver cdc_acm
[   14.568201] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   14.577589] usbcore: registered new interface driver cdc_wdm
[   14.583943] Loading modules backported from Linux version v5.15.8-0-g43e577d7a2cb
[   14.591462] Backport generated by backports.git v5.15.8-1-0-g83f664bb
[   14.623413] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[   14.630895] usbcore: registered new interface driver pegasus
[   14.639625] usbcore: registered new interface driver r8152
[   14.647519] usbcore: registered new interface driver rtl8150
[   14.656279] usbcore: registered new interface driver ums-alauda
[   14.662933] usbcore: registered new interface driver ums-cypress
[   14.669520] usbcore: registered new interface driver ums-datafab
[   14.676051] usbcore: registered new interface driver ums-freecom
[   14.682601] usbcore: registered new interface driver ums-isd200
[   14.689079] usbcore: registered new interface driver ums-jumpshot
[   14.695840] usbcore: registered new interface driver ums-karma
[   14.702259] usbcore: registered new interface driver ums-sddr09
[   14.708679] usbcore: registered new interface driver ums-sddr55
[   14.715152] usbcore: registered new interface driver ums-usbat
[   14.722190] usbcore: registered new interface driver usbhid
[   14.727771] usbhid: USB HID core driver
[   14.735443] usbcore: registered new interface driver usbserial_generic
[   14.742046] usbserial: USB Serial support registered for generic
[   14.764361] xt_time: kernel timezone is -0000
[   14.770632] usbcore: registered new interface driver aqc111
[   14.777213] usbcore: registered new interface driver asix
[   14.783551] usbcore: registered new interface driver ax88179_178a
[   14.790546] usbcore: registered new interface driver cdc_ether
[   14.797779] usbcore: registered new interface driver cdc_ncm
[   14.818333] usb 2-2: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[   14.826551] usbcore: registered new interface driver ch341
[   14.832142] usbserial: USB Serial support registered for ch341-uart
[   14.840478] usbcore: registered new interface driver dm9601
[   14.847227] usbcore: registered new interface driver ftdi_sio
[   14.853082] usbserial: USB Serial support registered for FTDI USB Serial Device
[   14.861319] usbcore: registered new interface driver huawei_cdc_ncm
[   14.869316] iscsi: registered transport (tcp)
[   14.888139] r8152 2-2:1.0: load rtl8153a-3 v2 02/07/20 successfully
[   14.932751] r8152 2-2:1.0 eth1: v1.12.11
[   15.072105] usb 2-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[   15.103984] mt76x2u 2-1:1.0: ASIC revision: 76120044
[   15.146662] mt76x2u 2-1:1.0: ROM patch build: 20141115060606a
[   15.314655] mt76x2u 2-1:1.0: Firmware Version: 0.0.00
[   15.319717] mt76x2u 2-1:1.0: Build: 1
[   15.323426] mt76x2u 2-1:1.0: Build Time: 201507311614____
[   16.274369] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   16.276035] usbcore: registered new interface driver mt76x2u
[   16.286339] usbcore: registered new interface driver pl2303
[   16.292032] usbserial: USB Serial support registered for pl2303
[   16.300088] PPP generic driver version 2.4.2
[   16.305706] NET: Registered protocol family 24
[   16.311056] usbcore: registered new interface driver qmi_wwan
[   16.317832] usbcore: registered new interface driver rndis_host
[   16.324489] usbcore: registered new interface driver sierra
[   16.330136] usbserial: USB Serial support registered for Sierra USB modem
[   16.337866] usbcore: registered new interface driver sierra_net
[   16.346922] usbcore: registered new interface driver smsc95xx
[   16.353446] usbcore: registered new interface driver sr9700
[   16.361630] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[   16.369481] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[   16.390032] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[   16.403952] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin failed with error -2
[   16.415647] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin
[   19.389448] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[   19.409023] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:20:01 version 7.45.206 (r725000 CY) FWID 01-febaba43
[   19.450030] usbcore: registered new interface driver brcmfmac
[   19.459854] usbcore: registered new interface driver cdc_mbim
[   19.467609] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   19.473378] usbcore: registered new interface driver option
[   19.479012] usbserial: USB Serial support registered for GSM modem (1-port)
[   19.488364] usbcore: registered new interface driver qcserial
[   19.494246] usbserial: USB Serial support registered for Qualcomm USB modem
[   19.501602] kmodloader: done loading kernel modules from /etc/modules.d/*
[   19.753967] /etc/init.d/bootstatus: sh bin/bootwait.sh & [ok] ucidef
[   19.840001] ip_local_port_range: prefer different parity for start/end values.
[   21.370268] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[   21.378780] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   21.387033] br-lan: port 1(eth0) entered blocking state
[   21.392291] br-lan: port 1(eth0) entered disabled state
[   21.397662] device eth0 entered promiscuous mode
[   21.403552] br-lan: port 1(eth0) entered blocking state
[   21.408799] br-lan: port 1(eth0) entered forwarding state
[   22.208373] /etc/init.d/persistentdata: boot> shutdown.sh plog boot notupgraded
[   22.274671] plog-saved-to: /boot/plog /boot/plog/plogread-202112221329-boot-3.5.317-15.log
[   22.421165] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   22.428180] br-lan: port 2(wlan0) entered blocking state
[   22.433676] br-lan: port 2(wlan0) entered disabled state
[   22.439166] device wlan0 entered promiscuous mode
[   22.493837] /etc/init.d/persistentlucistatistics: boot> /boot/psave/rrd > /tmp/rrd [ok:1.4M:1:1]
[   22.748114] /etc/init.d/persistentnlbwmon: boot> pri&alt-data-ok [isrunning:1]
[   22.769314] /etc/init.d/persistentnlbwmon: boot-or-> nlbwmoncleanstop [1] pid: 5628
[   22.832812] /etc/init.d/persistentnlbwmon: boot> cleanstop-complete stop-ok
[   22.846980] /etc/init.d/persistentnlbwmon: boot> nlbwmon STOP [ok:1:16]
[   22.860951] /etc/init.d/persistentnlbwmon: boot-restore-pri> /boot/psave/nlbwmon(16)
[   22.909454] /etc/init.d/persistentnlbwmon: boot> start-as-wasrunning nlbwmon
[   23.027267] /etc/init.d/persistentnlbwmon: boot> complete  ok.S [running:7127 - wasrunning: 1]
[   23.118018] rc.local> ############################################################## start rc.local
[   23.359743] rc.custom early> tailroom_fix: ethtool -K eth0 rx off [apply_5.10]
[   23.413097] earlyboot_30-raspberrypi> WIFIREMOVE@ini [no]
[   23.444732] rc.custom>  ################################### startup init 20211222-1329
[   23.476046] rc.custom> /etc/custom/startup/* [run]
[   23.559472] 11-tap-opK> tapping opK
[   23.584121] 11-tap-opK> tapping snapstate.sh
[   23.742785] 32-spindown> SPINDOWN_TIME [notset]
[   23.789041] br-lan: port 3(wlan1) entered blocking state
[   23.794388] br-lan: port 3(wlan1) entered disabled state
[   23.799874] device wlan1 entered promiscuous mode
[   24.080083] 35-masqaddrouter> entry router@192.168.1.1 [ok]
[   24.130923] 71-macrunstartup> /etc/custom/d22506ef2dd8.sh startup [ok]
[   24.180118] 99-try-packagerepeat> retrytxt:/root/.99-try-packageinstalltxt.retry [dbg-nope]
[   24.251490] 996-boardrunstartup> Model:4-model-b /etc/custom/startup/4-model-b [ok:1]
[   24.284411] 996-boardrunstartup> /etc/custom/startup/4-model-b/17-rpi-4-startup-sample [run]
[   24.347676] rc.custom>  ################################### startup end 20211222-1329
[   24.408083] rc.custom> raspberrypi,4-model-b perftweaks /bin/rpi-perftweaks.sh [run]
[   24.456205] rc.custom> /etc/custom/everyboot/* [run]
[   24.588740] everyboot_30-raspberrypi-all> config.txt dtparam=sd_poll_once [live-plug-disabled_reboot-for-card-change]
[   24.648146] everyboot_71-macruneveryboot> /etc/custom/d22506ef2dd8.sh everyboot [ok]
[   24.712890] rc.custom> running mount-cmds: /bin/mountcmds.sh [mount]
[   24.776450] rc.local> no commit: nothing or nochanges
[   24.814845] rc.local> ############################################################## end rc.local
[   24.840543] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   24.847581] r8152 2-2:1.0 eth1: carrier on
[   31.911578] device wlan1 left promiscuous mode
[   31.916117] br-lan: port 3(wlan1) entered disabled state
[   53.928710] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   53.935294] br-lan: port 2(wlan0) entered blocking state
[   53.940616] br-lan: port 2(wlan0) entered forwarding state
[   61.583518] tailroom_fix: ethtool -K eth0 rx off [skip_notailroomindmesg]
[   61.590488] EEE_DISABLE [off]
3

this is build specific and translates to "i upgraded to r18370"...

probably there are still some issues with master and wifi...

hmm... forum software now says edit instead of quote... post

My advice is to use 21.02

4

this is build specific and translates to "i upgraded to r18370"...

typo!! /bin/rpi-sysup-online.sh -R release

1 Like
5

ok... I updated the 'release' build and now that is 'forward' from the original 21.02.1 build... alot of wifi stuff was added past tagging...

this may have implications for users on this board for upcoming 21.02.2 release depending on what fixes or reverts manifest prior to that occurence
(edit: fixed)

ref / possible fix

so seems you may need to go back to the 'static' 21.02.1 without all the wifi bumps...

(note: advice above is build specific... for general rpi4 openwrt, you should use the 21.02.1 img and not upgrade wifi packages or use imagebuilder (for a small while) if you rely on wifi)

6

It works after downgrading to 21.02.1-27006-1.0.7-3-r16325 - So no more upgrading for now I guess..

1 Like
7

I apologize for the 'update notice' and semi misleading nature of it...

truth is I had to make a judgement call on pushing a few important fixes to everyone... (and I did suspect that wifi may not work on it so could/should have been more open about that but so few people use wifi on these boards and I was not 100% sure the issue would still be there... thanks for reporting, it will likely help others alot... i'm tempted to revert what i'm pushing out but like I said... it's a judgement call at this stage on what would be best for the majority... so again apologies... hopefully the upcoming 21.02.2 will sort most of these things out)

1 Like
8

Its cool enough I could make this setup work with your help and the quick responses are highly appreciated! Ill sure report again after the next release, when I test it once more.

2 Likes
9

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.