ECC errors on R8000p

[mk24]

It looks like you have to start tftpd manually on the router. Then the router is a server at .1 and you should use a client to push the file to it.

Is there a way to unbrick an r8000?

hook up your serial cable. setup a tftp server and point to the directory where you have the image for the r8000 open putty. select "serial" make sure you have the right com port and baud rate(115200) turn on router. interrupt the bootup when prompted, if memory serves me correct, it is ctrl c. type "tftpd" into the putty window. use the tftp server and "put" the image file.

Note this poster said server for the PC when they meant client.

Most Netgear models have pushbutton activated recovery of some sort either nmrp or tftp.