EasyBox 803A - OpenWrt wont boot after uboot-transfer

Installing and Using OpenWrt
1

Hey everybody,
after hours of trying make that thing work, I decided to make a post.
I want to flash my EasyBox 803A with OpenWRT. I followed this article: https://openwrt.org/toh/astoria/arv752dpw22

I could transfer the given uboot ( took u-boot-arv8539pw22_brn/ from this site: https://downloads.openwrt.org/snapshots/targets/lantiq/xway/) and startet it. Next step: "loadx" and transfered the arv752dpw22.initsramfs-kernel.bin-OpenWRT Image. After erasing, and coping to flash I'm trying to use the "iminfo"-command. Then - nothing happens. Whats wrong? Where is my mistake?

2

Did you follow the guide exactly, and reverify the boot loader and image were transferred successfully by comparing with the local copies?

If you have flashed a badly transferred image/boot loader and nothing else has worked, maybe try this:
Rescue via serial

3

Read this article: https://clockworkbird9.wordpress.com/2014/12/25/when-easybox-803-a-meets-openwrt/
This method works fine.