EAP235-WALL v1.6 port mapping

Installing and Using OpenWrt Network and Wireless Configuration
1

Bought a EAP235-WALL v1.6 and the port labeling seems to be messed up, having trouble configuring it like my EAP225-WALL v2.8. Snapshot .bin was from 08/11 or so.

Is there a way I can help with the port mapping?

EAP235-WALL:

root@OpenWrt:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1504 qdisc fq_codel state UP qlen 1000
    link/ether e8:48:b8:f4:a1:10 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::ea48:b8ff:fef4:a110/64 scope link 
       valid_lft forever preferred_lft forever
3: lan0@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
    link/ether e8:48:b8:f4:a1:10 brd ff:ff:ff:ff:ff:ff
4: lan3@eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue master br-lan state LOWERLAYERDOWN qlen 1000
    link/ether e8:48:b8:f4:a1:10 brd ff:ff:ff:ff:ff:ff
5: lan2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
    link/ether e8:48:b8:f4:a1:10 brd ff:ff:ff:ff:ff:ff
6: lan1@eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue master br-lan state LOWERLAYERDOWN qlen 1000
    link/ether e8:48:b8:f4:a1:10 brd ff:ff:ff:ff:ff:ff
7: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether e8:48:b8:f4:a1:10 brd ff:ff:ff:ff:ff:ff
8: wlan1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether e8:48:b8:f4:a1:11 brd ff:ff:ff:ff:ff:ff
9: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen 1000
    link/ether e8:48:b8:f4:a1:10 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.1/24 brd 192.168.1.255 scope global br-lan
       valid_lft forever preferred_lft forever
    inet6 fdd4:6107:3baa::1/60 scope global noprefixroute 
       valid_lft forever preferred_lft forever
    inet6 fe80::ea48:b8ff:fef4:a110/64 scope link 
       valid_lft forever preferred_lft forever

EAP225-WALL:

root@ap-kitchen:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP qlen 1000
    link/ether d8:47:32:e8:04:cc brd ff:ff:ff:ff:ff:ff
    inet6 fe80::da47:32ff:fee8:4cc/64 scope link 
       valid_lft forever preferred_lft forever
6: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen 1000
    link/ether d8:47:32:e8:04:cc brd ff:ff:ff:ff:ff:ff
    inet 192.168.16.108/24 brd 192.168.16.255 scope global br-lan
       valid_lft forever preferred_lft forever
    inet6 fe80::da47:32ff:fee8:4cc/64 scope link 
       valid_lft forever preferred_lft forever
7: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
    link/ether d8:47:32:e8:04:cc brd ff:ff:ff:ff:ff:ff
11: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
    link/ether d8:47:32:e8:04:cd brd ff:ff:ff:ff:ff:ff
    inet6 fe80::da47:32ff:fee8:4cd/64 scope link 
       valid_lft forever preferred_lft forever
12: wlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
    link/ether d8:47:32:e8:04:cc brd ff:ff:ff:ff:ff:ff
    inet6 fe80::da47:32ff:fee8:4cc/64 scope link 
       valid_lft forever preferred_lft forever
13: wlan1-1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
    link/ether da:47:32:e8:04:cc brd ff:ff:ff:ff:ff:ff
    inet6 fe80::d847:32ff:fee8:4cc/64 scope link 
       valid_lft forever preferred_lft forever
14: wlan1-2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP qlen 1000
    link/ether de:47:32:e8:04:cc brd ff:ff:ff:ff:ff:ff
    inet6 fe80::dc47:32ff:fee8:4cc/64 scope link 
       valid_lft forever preferred_lft forever

The uci commands I used to config the EAP225-WALL do not work on the EAP235-WALL.

uci del network.lan.ipaddr
uci del network.lan.netmask
uci del network.lan.ip6assign
uci set network.lan.proto='dhcp'
uci set dhcp.lan.ignore='1'
uci commit network
/etc/init.d/dnsmasq disable
/etc/init.d/dnsmasq stop
/etc/init.d/odhcpd disable
/etc/init.d/odhcpd stop
/etc/init.d/firewall disable
/etc/init.d/firewall stop
reboot
2

EAP235-Wall port labeling is just fine, I think you're confusing its DSA layout with the legacy swconfig layout that the EAP225-Wall uses (it being QCA).

1 Like
3

Sorry, I assumed this was consistent with device support for all versions, which was on-topic for that thread.

For my reference:

4

As long as you have a v1.x, it's still the same hardware. TP-Link gives their hardware revisions major increments, the minor ones (.1, .2, ...) are software revisions.

Might be easier to share your actual configuration files instead of posting the commands you entered. Those don't show the state of your configuration.