Using Dynalink DL-WRX36 on OpenWRT about year since setup(no changes done recently)..just came home and no WIFI .. it responded on LAN. (kernel error see below)
several Soft/Hard restarts doesn't help
(OpenWrt 23.05.2 r23630-842932a63d / LuCI openwrt-23.05 branch git-23.306.39416-c86c256)
So now during startup in kernel logs:
[ 12.685146] qcom-q6v5-wcss-pil cd00000.q6v5_wcss: fatal error received:
[ 12.685146] QC Image Version: QC_IMAGE_VERSION_STRING=WLAN.HK.2.9.0.1-01385-QCAHKSWPL_SILICONZ-1
[ 12.685146] Image Variant : IMAGE_VARIANT_STRING=8074.wlanfw.eval_v2Q
[ 12.685146]
[ 12.685146] wal_peer_control.c:2870 Assertion is_graceful_to_handle failedparam0 :zero, param1 :zero, param2 :zero.
[ 12.685146] Thread ID : 0x00000060 Thread name : WLAN RT1 Process ID : 0
[ 12.685146] Register:
[ 12.685146] SP : 0x4bfd5938
[ 12.685146] FP : 0x4bfd5940
[ 12.685146] PC : 0x4b1080c4
[ 12.685146] SSR : 0x00000008
[ 12.685146] BADVA : 0x00020000
[ 12.685146] LR : 0x4b107860
[ 12.685146]
[ 12.685146] Stack Dump
[ 12.685146] from : 0x4bfd5938
[ 12.685146] to : 0x4bfd61b0
[ 12.685146]
[ 12.734121] remoteproc remoteproc0: crash detected in cd00000.q6v5_wcss: type fatal error
[ 12.756370] remoteproc remoteproc0: handling crash #1 in cd00000.q6v5_wcss
[ 12.764598] remoteproc remoteproc0: recovering cd00000.q6v5_wcss
[ 12.797200] remoteproc remoteproc0: stopped remote processor cd00000.q6v5_wcss
[ 13.041892] br-lan1: port 6(phy0-ap0) entered disabled state
[ 13.042144] ath11k c000000.wifi: failed to find peer b8:06:0d:a8:c3:d9 on vdev 1 after creation
[ 13.044345] nss-dp 3a001000.dp1 lan4: PHY Link up speed: 100
[ 13.046632] ath11k c000000.wifi: failed to find peer vdev_id 1 addr b8:06:0d:a8:c3:d9 in delete
[ 13.055103] br-lan1: port 3(lan4) entered blocking state
[ 13.060957] ath11k c000000.wifi: failed peer b8:06:0d:a8:c3:d9 delete vdev_id 1 fallback ret -22
[ 13.069371] br-lan1: port 3(lan4) entered forwarding state
[ 13.074926] ath11k c000000.wifi: Failed to add peer: b8:06:0d:a8:c3:d9 for VDEV: 1
[ 13.088998] ath11k c000000.wifi: Failed to add station: b8:06:0d:a8:c3:d9 for VDEV: 1
[ 13.198887] ath11k c000000.wifi: failed to send WMI_PEER_DELETE cmd
[ 13.198930] ath11k c000000.wifi: failed to delete peer vdev_id 0 addr b8:06:0d:a8:c3:d9 ret -108
[ 13.203974] ath11k c000000.wifi: Failed to delete peer: b8:06:0d:a8:c3:d9 for VDEV: 0
[ 13.213052] ------------[ cut here ]------------
[ 13.220717] WARNING: CPU: 0 PID: 1624 at 0xffffffc000a8aa70 [mac80211@00000000ffe0f687+0x85000]
[ 13.225411] Modules linked in: pppoe ppp_async nft_fib_inet nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_table_inet ath11k_ahb ath11k pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_counter nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mac80211 cfg80211 slhc qrtr_smd qrtr qmi_helpers nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c crc_ccitt compat sha512_generic seqiv jitterentropy_rng drbg michael_mic hmac cmac leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom qca_nss_dp qca_ssdk gpio_button_hotplug ext4 mbcache jbd2 aquantia hwmon crc32c_generic
[ 13.281383] CPU: 0 PID: 1624 Comm: hostapd Not tainted 5.15.137 #0
[ 13.303618] Hardware name: Dynalink DL-WRX36 (DT)
[ 13.309605] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 13.314384] pc : 0xffffffc000a8aa70 [mac80211@00000000ffe0f687+0x85000]
[ 13.321154] lr : 0xffffffc000a8aa6c [mac80211@00000000ffe0f687+0x85000]
[ 13.327751] sp : ffffffc00bb0b840
[ 13.334342] x29: ffffffc00bb0b840 x28: ffffff8004161780 x27: ffffffc00bb0bdd0
[ 13.337822] x26: ffffff8001ca8080 x25: ffffffc008b760c0 x24: ffffffc000a7b000
[ 13.344940] x23: ffffffc00bb0ba38 x22: ffffff8011f8c900 x21: ffffff8009e64aa8
[ 13.352059] x20: ffffff8004358880 x19: ffffff8009e64000 x18: ffffffc008a77b30
[ 13.359175] x17: 6f662039643a3363 x16: 3a38613a64303a36 x15: 0000000000000456
[ 13.366293] x14: 0000000000000172 x13: ffffffc00bb0b378 x12: ffffffc008acfb30
[ 13.373412] x11: ffffffc000c49f30 x10: ffffffc00bb0b730 x9 : ffffffc00bb0b750
[ 13.380531] x8 : 00000000ffffffd0 x7 : 0000000000000000 x6 : 0000000000008e20
[ 13.387647] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffffff8004161780
[ 13.394765] x2 : 0000000000000000 x1 : ffffff8004161780 x0 : 00000000ffffff94
[ 13.401884] Call trace:
[ 13.408993] 0xffffffc000a8aa70 [mac80211@00000000ffe0f687+0x85000]
[ 13.411257] 0xffffffc000a8ad34 [mac80211@00000000ffe0f687+0x85000]
[ 13.417507] 0xffffffc000aa323c [mac80211@00000000ffe0f687+0x85000]
[ 13.423757] 0xffffffc000a4b1a8 [cfg80211@00000000f412765c+0x45000]
[ 13.430008] 0xffffffc00863ffdc
[ 13.436251] 0xffffffc008640468
[ 13.439375] 0xffffffc00863f07c
[ 13.442501] 0xffffffc00863f8e8
[ 13.445626] 0xffffffc00863e818
[ 13.448751] 0xffffffc00863eab4
[ 13.451875] 0xffffffc00859c1e8
[ 13.455001] 0xffffffc00859ebc8
[ 13.458125] 0xffffffc00859ed18
[ 13.461251] 0xffffffc00859eda4
[ 13.464376] 0xffffffc008022f6c
[ 13.467500] 0xffffffc008023080
[ 13.470626] 0xffffffc008792c18
[ 13.473750] 0xffffffc008793a38
[ 13.476876] 0xffffffc0080115f4
[ 13.480002] ---[ end trace 1091a2b552892401 ]---
[ 13.850746] nss-dp 3a001600.dp4 lan1: PHY Link up speed: 1000
[ 13.850826] br-lan1: port 1(lan1) entered blocking state
[ 13.855486] br-lan1: port 1(lan1) entered forwarding state
[ 17.657711] ath11k_warn: 1 callbacks suppressed
[ 17.657727] ath11k c000000.wifi: failed to send WMI_PDEV_BSS_CHAN_INFO_REQUEST cmd
[ 17.661085] ath11k c000000.wifi: failed to send pdev bss chan info request
[ 17.668869] ath11k c000000.wifi: failed to send WMI_PDEV_SET_PARAM cmd
[ 17.675561] ath11k c000000.wifi: Failed to set beacon mode for VDEV: 0
[ 17.682095] ath11k c000000.wifi: failed to send WMI_BCN_TMPL_CMDID
[ 17.688581] ath11k c000000.wifi: failed to submit beacon template command: -108
[ 17.694754] ath11k c000000.wifi: failed to update bcn template: -108
[ 17.701966] ath11k c000000.wifi: failed to send WMI_VDEV_SET_PARAM_CMDID
[ 17.708547] ath11k c000000.wifi: failed to set BA BUFFER SIZE 256 for vdev: 0
[ 17.715242] ath11k c000000.wifi: failed to send WMI_VDEV_SET_PARAM_CMDID
[ 18.088848] qcom-q6v5-wcss-pil cd00000.q6v5_wcss: start timed out
[ 18.088888] remoteproc remoteproc0: can't start rproc cd00000.q6v5_wcss: -110
[ 23.723129] ath11k_warn: 62 callbacks suppressed
[ 23.723150] ath11k c000000.wifi: failed to send WMI_PDEV_BSS_CHAN_INFO_REQUEST cmd
[ 23.726841] ath11k c000000.wifi: failed to send pdev bss chan info request
[ 23.734449] ath11k c000000.wifi: failed to send WMI_PDEV_SET_PARAM cmd
[ 23.741092] ath11k c000000.wifi: Failed to set beacon mode for VDEV: 0
[ 23.747599] ath11k c000000.wifi: failed to send WMI_BCN_TMPL_CMDID
[ 23.754107] ath11k c000000.wifi: failed to submit beacon template command: -108
[ 23.760276] ath11k c000000.wifi: failed to update bcn template: -108
[ 23.767464] ath11k c000000.wifi: failed to send WMI_VDEV_SET_PARAM_CMDID
[ 23.774080] ath11k c000000.wifi: failed to set BA BUFFER SIZE 256 for vdev: 0
[ 23.780754] ath11k c000000.wifi: failed to send WMI_VDEV_SET_PARAM_CMDID
[ 29.792967] ath11k_warn: 53 callbacks suppressed
What could happend? How to fix this?
PS
And is good idea to try upgrade now from 23.05.2 to latest 24.10.0 ? or it would not help with this? ( it was stable and wokring on 23.05.2 since initial setup)
If yes can just use [Sysupgrade image] via LuCI or 23.05->24.10 is different process to upgrade?
UPD1:
Looks like I found a note for 23.05->24.10