Dumb AP on Netgear WNDR4300v1

[ncompact]

since I also had problems creating the vlans, try to see if this helps you (but currently all the routers I have have switched to DSA):

[solved] Porting swconfig to dsa (help me)

I would be very grateful if you could provide me a configuration file with defined 3 vlans (without losing access to the device) in the dsa style which is currently driving me crazy lan = vlan 10 iot = vlan 20 guests = vlan 30 this is for an access point dump where 1 cable brings in all vlans from a router still with swconfig where the following vlans are defined: vlan 1 vlan 2 = wan vlan 10 = lan vlan 20 = iot vlan 30 = guests Thank you config switch option name 'switch0' …