DIR-878 5GHz not working

5ghz wifi disappeared after messing around with dd-wrt's wireless settings. I was using Dlink firmware 1.30 and it was working fine but I needed to log my ISP connection. Then, I flashed OpenWrt 23.05.2 but wifi was too slow; ~100mbs. Then, I flashed dd-wrt r54475 and first thing I noticed was that wifi leds wasn't wroking, wan's mac address was the same as wlan1's but no problem, I needed to clone wan's mac anyway. Also the tab "Switch" dissappears after a factory reset.

DD-wrt's Wifi speed was the same as OpenWrt but since dd-wrt has a lot of settings to tune I started to mess around with the settings. The top speed I got was 180mbs using 1+2+3 tx/rx antenna chain. Then I was curious to see what would happen if I set tx/rx antenna chain to 1 and then after that, 5ghz wifi disappeared and never came back. Even after reverting to original dlink's firmware.

I have tried every single dlink's firmware and in all of them 5ghz wifi does not appear and 2.4ghz is buggy (see screenshots attachment). Dlink's version.txt shows diferent country code for 2.4ghz and 5ghz (see screenshot attachment). 5ghz is always BR in all firmwares and 2.4ghz only change to US when I flash v1.01, but then, goes back to AU when I factory reset. I tried the 2 only avaliable v1.20 and v1.30 BR (decrypted) firmwares but 2.4ghz never went back to BR.

Does anyone has any information about this so I can ressurrect my router? I wonder if the config parttition got corrupted for some reason and wifi 5ghz does not work because the country codes are not the same. But I don't know how can I edit those settings. Any guidance in what I need to do to true factory reset this router would be appretiated.

Thanks in advance.



as long as you're not running openwrt, not really.

all those are firmwares are black boxes to us.

1 Like

https://dd-wrt.com/ can help you

1 Like

the correct thing to do is compare the factory calibration data "art"
with the backup you made at the 1st opportunity you had
before playing & flashing so many firmware's & possibly breaking it

I'm interested to know if dd-wrt is directly changing the calibration data tho
if you don't have a backup then you can never really get it back
only send it back to the factory for re-calibration

the only other thing is the radio's are permanently broken

I can compare your factory partition to mine if you like ?
oh what county is it form BR AU or US ? AU here

Thank you for replying. I can flash OpenWrt no problem. If you have experience with it or a dir-878 to compare the logs would be nice.

Model: D-Link DIR-878 A1
Platform: ramips/mt7621
Version: 23.05.2 (r23630-842932a63d)
Date: 2023-11-15 01:54:44
Downloaded from https://firmware-selector.openwrt.org/?version=23.05.2&target=ramips%2Fmt7621&id=dlink_dir-878-a1
Flashed from DIR-878_A1_FW101B04.bin using Dlink's GUI recovery (snapshot version failed to flash)

I logged in, changed IP, set up syslog, enabled 5ghz, led indicator lights up green and nothing; it doesn't show on the list. Yesterday I tried to join other 5ghz wlan using client mode (scanning 5ghz wlan still works) but it didn't work (I had the password for it); it appeared for a second then dissapeared (screenshot).

I could not paste the logs. I will do next.

kernel.log

[    0.000000] Linux version 5.15.137 (builder@buildhost) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r23630-842932a63d) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Tue Nov 14 13:38:11 2023
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is D-Link DIR-878 A1
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] VPE topology {2,2} total 4
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] percpu: Embedded 11 pages/cpu s14736 r8192 d22128 u45056
[    0.000000] pcpu-alloc: s14736 r8192 d22128 u45056 alloc=11*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32480
[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] Writing ErrCtl register=00010800
[    0.000000] Readback ErrCtl register=00010800
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 119296K/131072K available (7300K kernel code, 624K rwdata, 880K rodata, 1232K init, 226K bss, 11776K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 256
[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[    0.000004] sched_clock: 64 bits at 880MHz, resolution 1ns, wraps every 4398046511103ns
[    0.016018] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[    0.088324] pid_max: default: 32768 minimum: 301
[    0.098276] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.112693] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.131902] rcu: Hierarchical SRCU implementation.
[    0.142130] smp: Bringing up secondary CPUs ...
[    0.151919] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.151946] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.151961] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.152005] CPU1 revision is: 0001992f (MIPS 1004Kc)
[    0.211658] Synchronize counters for CPU 1: done.
[    0.273916] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.273938] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.273949] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.273977] CPU2 revision is: 0001992f (MIPS 1004Kc)
[    0.332876] Synchronize counters for CPU 2: done.
[    0.393271] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.393293] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.393303] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.393334] CPU3 revision is: 0001992f (MIPS 1004Kc)
[    0.452453] Synchronize counters for CPU 3: done.
[    0.512051] smp: Brought up 1 node, 4 CPUs
[    0.525270] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.544765] futex hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.558692] pinctrl core: initialized pinctrl subsystem
[    0.570580] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.583054] thermal_sys: Registered thermal governor 'step_wise'
[    0.589217] FPU Affinity set after 11720 emulations
[    0.613857] clocksource: Switched to clocksource GIC
[    0.625224] NET: Registered PF_INET protocol family
[    0.635010] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.650302] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.666863] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.682205] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.697421] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.711428] TCP: Hash tables configured (established 1024 bind 1024)
[    0.724196] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.737109] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.751304] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.762532] PCI: CLS 0 bytes, default 32
[    0.773086] workingset: timestamp_bits=14 max_order=15 bucket_order=1
[    0.791248] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.802830] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.823597] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.842203] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.853709] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.865175] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.876753] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
[    0.890019] mt7621-pci 1e140000.pcie:   No bus range found for /pcie@1e140000, using [bus 00-ff]
[    0.907493] mt7621-pci 1e140000.pcie:      MEM 0x0060000000..0x006fffffff -> 0x0060000000
[    0.923702] mt7621-pci 1e140000.pcie:       IO 0x001e160000..0x001e16ffff -> 0x0000000000
[    1.293929] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK)
[    1.307699] mt7621-pci 1e140000.pcie: PCIE0 enabled
[    1.317360] mt7621-pci 1e140000.pcie: PCIE1 enabled
[    1.327059] PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[    1.341255] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
[    1.353779] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.364648] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[    1.378300] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    1.390617] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[    1.402509] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    1.414951] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    1.427492] pci 0000:00:00.0: supports D1
[    1.435339] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    1.447560] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[    1.459461] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    1.471863] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    1.484382] pci 0000:00:01.0: supports D1
[    1.492224] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[    1.505583] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.521438] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    1.537563] pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280
[    1.549454] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[    1.563032] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[    1.593978] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    1.604286] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
[    1.616362] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    1.629843] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff pref]
[    1.644185] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.657568] pci 0000:02:00.0: [14c3:7615] type 00 class 0x000280
[    1.669450] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[    1.683037] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[    1.713979] pci 0000:00:01.0: PCI bridge to [bus 02-ff]
[    1.724283] pci 0000:00:01.0:   bridge window [io  0x0000-0x0fff]
[    1.736361] pci 0000:00:01.0:   bridge window [mem 0x00000000-0x000fffff]
[    1.749842] pci 0000:00:01.0:   bridge window [mem 0x00000000-0x000fffff pref]
[    1.764195] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    1.777371] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    1.790451] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    1.804271] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[    1.817404] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[    1.831228] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[    1.844716] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
[    1.859053] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
[    1.872527] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref]
[    1.886870] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff]
[    1.900363] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff]
[    1.913846] pci 0000:00:00.0: BAR 7: assigned [io  0x0000-0x0fff]
[    1.925921] pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff]
[    1.938036] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
[    1.952548] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.962381] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
[    1.974487] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    1.987960] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref]
[    2.002305] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff 64bit]
[    2.016831] pci 0000:00:01.0: PCI bridge to [bus 02]
[    2.026667] pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
[    2.038765] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff]
[    2.052241] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x603fffff pref]
[    2.069346] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    2.086713] printk: console [ttyS0] disabled
[    2.095276] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
[    2.113197] printk: console [ttyS0] enabled
[    2.129740] printk: bootconsole [early0] disabled
[    2.152415] spi-mt7621 1e000b00.spi: sys_freq: 220000000
[    2.164588] spi-nor spi0.0: w25q128 (16384 Kbytes)
[    2.174247] 4 fixed-partitions partitions found on MTD device spi0.0
[    2.186949] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
[    2.201548] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
[    2.216769] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
[    2.231443] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
[    2.246310] Creating 4 MTD partitions on "spi0.0":
[    2.255878] 0x000000000000-0x000000030000 : "u-boot"
[    2.267126] 0x000000030000-0x000000040000 : "u-boot-env"
[    2.278827] 0x000000040000-0x000000060000 : "factory"
[    2.290253] 0x000000060000-0x000001000000 : "firmware"
[    2.301699] 2 uimage-fw partitions found on MTD device firmware
[    2.313533] Creating 2 MTD partitions on "firmware":
[    2.323428] 0x000000000000-0x0000002aaff6 : "kernel"
[    2.333317] mtd: partition "kernel" doesn't end on an erase/write block -- force read-only
[    2.350845] 0x0000002aaff6-0x000000fa0000 : "rootfs"
[    2.360778] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only
[    2.379971] mtd: setting mtd5 (rootfs) as root device
[    2.390169] 1 squashfs-split partitions found on MTD device rootfs
[    2.402517] 0x0000006a0000-0x000000fa0000 : "rootfs_data"
[    2.546965] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module
[    2.567491] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
[    2.587717] mtk_soc_eth 1e100000.ethernet wan: mediatek frame engine at 0xbe100000, irq 21
[    2.606188] i2c_dev: i2c /dev entries driver
[    2.617798] NET: Registered PF_INET6 protocol family
[    2.630375] Segment Routing with IPv6
[    2.637826] In-situ OAM (IOAM) with IPv6
[    2.645781] NET: Registered PF_PACKET protocol family
[    2.655986] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    2.682312] 8021q: 802.1Q VLAN Support v1.8
[    2.696685] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module
[    2.729062] mt7530-mdio mdio-bus:1f: configuring for fixed/rgmii link mode
[    2.743720] mt7530-mdio mdio-bus:1f: Link is Up - 1Gbps/Full - flow control rx/tx
[    2.744792] mt7530-mdio mdio-bus:1f lan4 (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7530 PHY] (irq=23)
[    2.782222] mt7530-mdio mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7530 PHY] (irq=24)
[    2.805365] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7530 PHY] (irq=25)
[    2.828354] mt7530-mdio mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7530 PHY] (irq=26)
[    2.851216] DSA: tree 0 setup
[    2.864093] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    2.882193] Freeing unused kernel image (initmem) memory: 1232K
[    2.894041] This architecture does not have kernel memory protection.
[    2.906880] Run /sbin/init as init process
[    2.915045]   with arguments:
[    2.915053]     /sbin/init
[    2.915059]   with environment:
[    2.915064]     HOME=/
[    2.915069]     TERM=linux
[    3.347697] init: Console is alive
[    3.355036] init: - watchdog -
[    4.005843] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    4.066140] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.090210] init: - preinit -
[    4.892840] random: jshn: uninitialized urandom read (4 bytes read)
[    5.016189] random: jshn: uninitialized urandom read (4 bytes read)
[    5.066505] random: jshn: uninitialized urandom read (4 bytes read)
[    5.379327] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
[    5.399741] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[    5.404330] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
[    5.431121] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    7.603320] mount_root: no usable overlay filesystem found, using tmpfs overlay
[    7.622211] urandom-seed: Seed file not found (/etc/urandom.seed)
[    7.725794] procd: - early -
[    7.731768] procd: - watchdog -
[    8.337339] procd: - watchdog -
[    8.344670] procd: - ubus -
[    8.411219] random: ubusd: uninitialized urandom read (4 bytes read)
[    8.426332] random: ubusd: uninitialized urandom read (4 bytes read)
[    8.443923] random: ubusd: uninitialized urandom read (4 bytes read)
[    8.461399] procd: - init -
[    9.021358] kmodloader: loading kernel modules from /etc/modules.d/*
[    9.255964] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b
[    9.270940] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36
[    9.504063] pci 0000:00:00.0: enabling device (0000 -> 0003)
[    9.515386] mt7615e 0000:01:00.0: enabling device (0000 -> 0002)
[    9.539789] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    9.545780] pci 0000:00:01.0: enabling device (0000 -> 0003)
[    9.557255] mt7615e 0000:02:00.0: enabling device (0000 -> 0002)
[    9.575800] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
[    9.575800] 
[    9.590566] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[    9.595017] ieee80211 phy1: copying sband (band 1) due to VHT EXT NSS BW flag
[    9.614466] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
[    9.614466] 
[    9.656178] PPP generic driver version 2.4.2
[    9.667757] NET: Registered PF_PPPOX protocol family
[    9.687530] kmodloader: done loading kernel modules from /etc/modules.d/*
[    9.841858] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20200814163649
[    9.841904] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20200814163649
[    9.924371] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20190415154149
[    9.924388] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20190415154149
[   10.435924] urngd: v1.0.2 started.
[   10.921356] random: jshn: uninitialized urandom read (4 bytes read)
[   11.050534] random: jshn: uninitialized urandom read (4 bytes read)
[   11.117658] random: jshn: uninitialized urandom read (4 bytes read)
[   11.508034] random: crng init done
[   11.514942] random: 37 urandom warning(s) missed due to ratelimiting
[   30.558060] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
[   30.590964] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
[   30.607035] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   30.611492] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
[   30.640969] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   30.655516] br-lan: port 1(lan1) entered blocking state
[   30.666014] br-lan: port 1(lan1) entered disabled state
[   30.678286] device lan1 entered promiscuous mode
[   30.687620] device eth0 entered promiscuous mode
[   30.724227] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode
[   30.740987] br-lan: port 2(lan2) entered blocking state
[   30.751553] br-lan: port 2(lan2) entered disabled state
[   30.764314] device lan2 entered promiscuous mode
[   30.785962] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode
[   30.801878] br-lan: port 3(lan3) entered blocking state
[   30.812503] br-lan: port 3(lan3) entered disabled state
[   30.825481] device lan3 entered promiscuous mode
[   30.847669] mt7530-mdio mdio-bus:1f lan4: configuring for phy/gmii link mode
[   30.864568] br-lan: port 4(lan4) entered blocking state
[   30.875088] br-lan: port 4(lan4) entered disabled state
[   30.888165] device lan4 entered promiscuous mode
[   30.922780] mtk_soc_eth 1e100000.ethernet wan: PHY [mdio-bus:04] driver [MediaTek MT7530 PHY] (irq=POLL)
[   30.941956] mtk_soc_eth 1e100000.ethernet wan: configuring for phy/rgmii link mode
[   30.949803] jffs2: notice: (2196) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   33.069064] overlayfs: upper fs does not support tmpfile.
[   33.706414] mt7530-mdio mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[   33.722368] br-lan: port 1(lan1) entered blocking state
[   33.732863] br-lan: port 1(lan1) entered forwarding state
[   33.744541] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[  775.700144] br-lan: port 1(lan1) entered disabled state
[  775.716101] device lan1 left promiscuous mode
[  775.725168] br-lan: port 1(lan1) entered disabled state
[  775.806413] mt7530-mdio mdio-bus:1f lan1: Link is Down
[  775.818375] device lan2 left promiscuous mode
[  775.827420] br-lan: port 2(lan2) entered disabled state
[  775.907547] device lan3 left promiscuous mode
[  775.916549] br-lan: port 3(lan3) entered disabled state
[  775.987745] device lan4 left promiscuous mode
[  775.996762] br-lan: port 4(lan4) entered disabled state
[  776.060806] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
[  776.259063] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
[  776.274825] device eth0 left promiscuous mode
[  776.284070] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[  776.287941] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
[  776.316258] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  776.329608] br-lan: port 1(lan1) entered blocking state
[  776.340154] br-lan: port 1(lan1) entered disabled state
[  776.352452] device lan1 entered promiscuous mode
[  776.361863] device eth0 entered promiscuous mode
[  776.379173] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode
[  776.394862] br-lan: port 2(lan2) entered blocking state
[  776.405399] br-lan: port 2(lan2) entered disabled state
[  776.417752] device lan2 entered promiscuous mode
[  776.432436] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode
[  776.447859] br-lan: port 3(lan3) entered blocking state
[  776.458362] br-lan: port 3(lan3) entered disabled state
[  776.470674] device lan3 entered promiscuous mode
[  776.485484] mt7530-mdio mdio-bus:1f lan4: configuring for phy/gmii link mode
[  776.500774] br-lan: port 4(lan4) entered blocking state
[  776.511272] br-lan: port 4(lan4) entered disabled state
[  776.523860] device lan4 entered promiscuous mode
[  779.065594] mt7530-mdio mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[  779.081531] br-lan: port 1(lan1) entered blocking state
[  779.092062] br-lan: port 1(lan1) entered forwarding state
[  779.104081] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 1907.365336] br-lan: port 5(phy1-ap0) entered blocking state
[ 1907.376544] br-lan: port 5(phy1-ap0) entered disabled state
[ 1907.388290] device phy1-ap0 entered promiscuous mode
[ 1907.403163] device phy1-ap0 left promiscuous mode
[ 1907.412876] br-lan: port 5(phy1-ap0) entered disabled state
[ 1907.467462] br-lan: port 5(phy1-ap0) entered blocking state
[ 1907.478721] br-lan: port 5(phy1-ap0) entered disabled state
[ 1907.490528] device phy1-ap0 entered promiscuous mode
[ 1909.617578] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap0: link becomes ready
[ 1909.631167] br-lan: port 5(phy1-ap0) entered blocking state
[ 1909.642333] br-lan: port 5(phy1-ap0) entered forwarding state

system.log.pt1

Tue Nov 14 13:38:16 2023 kern.notice kernel: [    0.000000] Linux version 5.15.137 (builder@buildhost) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r23630-842932a63d) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Tue Nov 14 13:38:11 2023
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] printk: bootconsole [early0] enabled
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] MIPS: machine is D-Link DIR-878 A1
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] VPE topology {2,2} total 4
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Tue Nov 14 13:38:16 2023 kern.warn kernel: [    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] Zone ranges:
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] Movable zone start for each node
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] Early memory node ranges
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] percpu: Embedded 11 pages/cpu s14736 r8192 d22128 u45056
Tue Nov 14 13:38:16 2023 kern.debug kernel: [    0.000000] pcpu-alloc: s14736 r8192 d22128 u45056 alloc=11*4096
Tue Nov 14 13:38:16 2023 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32480
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] Writing ErrCtl register=00010800
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] Readback ErrCtl register=00010800
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] Memory: 119296K/131072K available (7300K kernel code, 624K rwdata, 880K rodata, 1232K init, 226K bss, 11776K reserved, 0K cma-reserved)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] rcu: Hierarchical RCU implementation.
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] 	Tracing variant of Tasks RCU enabled.
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] NR_IRQS: 256
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.000004] sched_clock: 64 bits at 880MHz, resolution 1ns, wraps every 4398046511103ns
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.016018] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.088324] pid_max: default: 32768 minimum: 301
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.098276] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.112693] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.131902] rcu: Hierarchical SRCU implementation.
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.142130] smp: Bringing up secondary CPUs ...
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.151919] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.151946] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Tue Nov 14 13:38:16 2023 kern.warn kernel: [    0.151961] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.152005] CPU1 revision is: 0001992f (MIPS 1004Kc)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.211658] Synchronize counters for CPU 1: done.
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.273916] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.273938] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Tue Nov 14 13:38:16 2023 kern.warn kernel: [    0.273949] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.273977] CPU2 revision is: 0001992f (MIPS 1004Kc)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.332876] Synchronize counters for CPU 2: done.
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.393271] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.393293] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Tue Nov 14 13:38:16 2023 kern.warn kernel: [    0.393303] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.393334] CPU3 revision is: 0001992f (MIPS 1004Kc)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.452453] Synchronize counters for CPU 3: done.
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.512051] smp: Brought up 1 node, 4 CPUs
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.525270] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.544765] futex hash table entries: 1024 (order: 3, 32768 bytes, linear)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.558692] pinctrl core: initialized pinctrl subsystem
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.570580] NET: Registered PF_NETLINK/PF_ROUTE protocol family
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.583054] thermal_sys: Registered thermal governor 'step_wise'
Tue Nov 14 13:38:16 2023 kern.debug kernel: [    0.589217] FPU Affinity set after 11720 emulations
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.613857] clocksource: Switched to clocksource GIC
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.625224] NET: Registered PF_INET protocol family
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.635010] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.650302] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.666863] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.682205] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.697421] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.711428] TCP: Hash tables configured (established 1024 bind 1024)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.724196] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.737109] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.751304] NET: Registered PF_UNIX/PF_LOCAL protocol family
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.762532] PCI: CLS 0 bytes, default 32
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.773086] workingset: timestamp_bits=14 max_order=15 bucket_order=1
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.791248] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.802830] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.823597] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.842203] mt7621_gpio 1e000600.gpio: registering 32 gpios
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.853709] mt7621_gpio 1e000600.gpio: registering 32 gpios
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.865175] mt7621_gpio 1e000600.gpio: registering 32 gpios
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.876753] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.890019] mt7621-pci 1e140000.pcie:   No bus range found for /pcie@1e140000, using [bus 00-ff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.907493] mt7621-pci 1e140000.pcie:      MEM 0x0060000000..0x006fffffff -> 0x0060000000
Tue Nov 14 13:38:16 2023 kern.info kernel: [    0.923702] mt7621-pci 1e140000.pcie:       IO 0x001e160000..0x001e16ffff -> 0x0000000000
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.293929] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.307699] mt7621-pci 1e140000.pcie: PCIE0 enabled
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.317360] mt7621-pci 1e140000.pcie: PCIE1 enabled
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.327059] PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.341255] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.353779] pci_bus 0000:00: root bus resource [bus 00-ff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.364648] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.378300] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.390617] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.402509] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.414951] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.427492] pci 0000:00:00.0: supports D1
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.435339] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.447560] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.459461] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.471863] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.484382] pci 0000:00:01.0: supports D1
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.492224] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.505583] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.521438] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.537563] pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.549454] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.563032] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.593978] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.604286] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.616362] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.629843] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff pref]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.644185] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.657568] pci 0000:02:00.0: [14c3:7615] type 00 class 0x000280
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.669450] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.683037] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.713979] pci 0000:00:01.0: PCI bridge to [bus 02-ff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.724283] pci 0000:00:01.0:   bridge window [io  0x0000-0x0fff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.736361] pci 0000:00:01.0:   bridge window [mem 0x00000000-0x000fffff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.749842] pci 0000:00:01.0:   bridge window [mem 0x00000000-0x000fffff pref]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.764195] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.777371] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.790451] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.804271] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.817404] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.831228] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.844716] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.859053] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.872527] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.886870] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.900363] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.913846] pci 0000:00:00.0: BAR 7: assigned [io  0x0000-0x0fff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.925921] pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x1fff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.938036] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.952548] pci 0000:00:00.0: PCI bridge to [bus 01]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.962381] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.974487] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    1.987960] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x601fffff pref]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.002305] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff 64bit]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.016831] pci 0000:00:01.0: PCI bridge to [bus 02]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.026667] pci 0000:00:01.0:   bridge window [io  0x1000-0x1fff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.038765] pci 0000:00:01.0:   bridge window [mem 0x60200000-0x602fffff]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.052241] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x603fffff pref]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.069346] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.086713] printk: console [ttyS0] disabled
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.095276] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.113197] printk: console [ttyS0] enabled
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.129740] printk: bootconsole [early0] disabled
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.152415] spi-mt7621 1e000b00.spi: sys_freq: 220000000
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.164588] spi-nor spi0.0: w25q128 (16384 Kbytes)
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    2.174247] 4 fixed-partitions partitions found on MTD device spi0.0
Tue Nov 14 13:38:16 2023 kern.err kernel: [    2.186949] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
Tue Nov 14 13:38:16 2023 kern.err kernel: [    2.201548] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
Tue Nov 14 13:38:16 2023 kern.err kernel: [    2.216769] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
Tue Nov 14 13:38:16 2023 kern.err kernel: [    2.231443] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    2.246310] Creating 4 MTD partitions on "spi0.0":
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    2.255878] 0x000000000000-0x000000030000 : "u-boot"
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    2.267126] 0x000000030000-0x000000040000 : "u-boot-env"
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    2.278827] 0x000000040000-0x000000060000 : "factory"
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    2.290253] 0x000000060000-0x000001000000 : "firmware"
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    2.301699] 2 uimage-fw partitions found on MTD device firmware
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    2.313533] Creating 2 MTD partitions on "firmware":
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    2.323428] 0x000000000000-0x0000002aaff6 : "kernel"
Tue Nov 14 13:38:16 2023 kern.warn kernel: [    2.333317] mtd: partition "kernel" doesn't end on an erase/write block -- force read-only
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    2.350845] 0x0000002aaff6-0x000000fa0000 : "rootfs"
Tue Nov 14 13:38:16 2023 kern.warn kernel: [    2.360778] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.379971] mtd: setting mtd5 (rootfs) as root device
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    2.390169] 1 squashfs-split partitions found on MTD device rootfs
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    2.402517] 0x0000006a0000-0x000000fa0000 : "rootfs_data"
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.546965] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.567491] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.587717] mtk_soc_eth 1e100000.ethernet wan: mediatek frame engine at 0xbe100000, irq 21
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.606188] i2c_dev: i2c /dev entries driver
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.617798] NET: Registered PF_INET6 protocol family
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.630375] Segment Routing with IPv6
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.637826] In-situ OAM (IOAM) with IPv6
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.645781] NET: Registered PF_PACKET protocol family
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.655986] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.682312] 8021q: 802.1Q VLAN Support v1.8
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.696685] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.729062] mt7530-mdio mdio-bus:1f: configuring for fixed/rgmii link mode
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.743720] mt7530-mdio mdio-bus:1f: Link is Up - 1Gbps/Full - flow control rx/tx
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.744792] mt7530-mdio mdio-bus:1f lan4 (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7530 PHY] (irq=23)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.782222] mt7530-mdio mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7530 PHY] (irq=24)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.805365] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7530 PHY] (irq=25)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.828354] mt7530-mdio mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7530 PHY] (irq=26)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.851216] DSA: tree 0 setup
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.864093] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.882193] Freeing unused kernel image (initmem) memory: 1232K
Tue Nov 14 13:38:16 2023 kern.warn kernel: [    2.894041] This architecture does not have kernel memory protection.
Tue Nov 14 13:38:16 2023 kern.info kernel: [    2.906880] Run /sbin/init as init process
Tue Nov 14 13:38:16 2023 kern.debug kernel: [    2.915045]   with arguments:
Tue Nov 14 13:38:16 2023 kern.debug kernel: [    2.915053]     /sbin/init
Tue Nov 14 13:38:16 2023 kern.debug kernel: [    2.915059]   with environment:
Tue Nov 14 13:38:16 2023 kern.debug kernel: [    2.915064]     HOME=/
Tue Nov 14 13:38:16 2023 kern.debug kernel: [    2.915069]     TERM=linux
Tue Nov 14 13:38:16 2023 user.info kernel: [    3.347697] init: Console is alive
Tue Nov 14 13:38:16 2023 user.info kernel: [    3.355036] init: - watchdog -
Tue Nov 14 13:38:16 2023 user.info kernel: [    4.005843] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Tue Nov 14 13:38:16 2023 user.info kernel: [    4.066140] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Tue Nov 14 13:38:16 2023 user.info kernel: [    4.090210] init: - preinit -
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    4.892840] random: jshn: uninitialized urandom read (4 bytes read)
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    5.016189] random: jshn: uninitialized urandom read (4 bytes read)
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    5.066505] random: jshn: uninitialized urandom read (4 bytes read)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    5.379327] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
Tue Nov 14 13:38:16 2023 kern.info kernel: [    5.399741] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Tue Nov 14 13:38:16 2023 kern.info kernel: [    5.404330] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
Tue Nov 14 13:38:16 2023 kern.info kernel: [    5.431121] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Tue Nov 14 13:38:16 2023 user.warn kernel: [    7.603320] mount_root: no usable overlay filesystem found, using tmpfs overlay
Tue Nov 14 13:38:16 2023 user.warn kernel: [    7.622211] urandom-seed: Seed file not found (/etc/urandom.seed)
Tue Nov 14 13:38:16 2023 user.info kernel: [    7.725794] procd: - early -
Tue Nov 14 13:38:16 2023 user.info kernel: [    7.731768] procd: - watchdog -
Tue Nov 14 13:38:16 2023 user.info kernel: [    8.337339] procd: - watchdog -
Tue Nov 14 13:38:16 2023 user.info kernel: [    8.344670] procd: - ubus -
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    8.411219] random: ubusd: uninitialized urandom read (4 bytes read)
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    8.426332] random: ubusd: uninitialized urandom read (4 bytes read)
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    8.443923] random: ubusd: uninitialized urandom read (4 bytes read)
Tue Nov 14 13:38:16 2023 user.info kernel: [    8.461399] procd: - init -
Tue Nov 14 13:38:16 2023 user.info kernel: [    9.021358] kmodloader: loading kernel modules from /etc/modules.d/*
Tue Nov 14 13:38:16 2023 kern.info kernel: [    9.255964] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b
Tue Nov 14 13:38:16 2023 kern.info kernel: [    9.270940] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36
Tue Nov 14 13:38:16 2023 kern.info kernel: [    9.504063] pci 0000:00:00.0: enabling device (0000 -> 0003)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    9.515386] mt7615e 0000:01:00.0: enabling device (0000 -> 0002)
Tue Nov 14 13:38:16 2023 kern.debug kernel: [    9.539789] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Tue Nov 14 13:38:16 2023 kern.info kernel: [    9.545780] pci 0000:00:01.0: enabling device (0000 -> 0003)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    9.557255] mt7615e 0000:02:00.0: enabling device (0000 -> 0002)
Tue Nov 14 13:38:16 2023 kern.info kernel: [    9.575800] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
Tue Nov 14 13:38:16 2023 kern.info kernel: [    9.575800]
Tue Nov 14 13:38:16 2023 kern.debug kernel: [    9.590566] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Tue Nov 14 13:38:16 2023 kern.debug kernel: [    9.595017] ieee80211 phy1: copying sband (band 1) due to VHT EXT NSS BW flag
Tue Nov 14 13:38:16 2023 kern.info kernel: [    9.614466] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
Tue Nov 14 13:38:16 2023 kern.info kernel: [    9.614466]
Tue Nov 14 13:38:16 2023 kern.info kernel: [    9.656178] PPP generic driver version 2.4.2
Tue Nov 14 13:38:16 2023 kern.info kernel: [    9.667757] NET: Registered PF_PPPOX protocol family
Tue Nov 14 13:38:16 2023 user.info kernel: [    9.687530] kmodloader: done loading kernel modules from /etc/modules.d/*
Tue Nov 14 13:38:16 2023 kern.info kernel: [    9.841858] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20200814163649
Tue Nov 14 13:38:16 2023 kern.info kernel: [    9.841904] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20200814163649
Tue Nov 14 13:38:16 2023 kern.info kernel: [    9.924371] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20190415154149
Tue Nov 14 13:38:16 2023 kern.info kernel: [    9.924388] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20190415154149

system.log.pt2

Tue Nov 14 13:38:16 2023 user.info kernel: [   10.435924] urngd: v1.0.2 started.
Tue Nov 14 13:38:16 2023 kern.notice kernel: [   10.921356] random: jshn: uninitialized urandom read (4 bytes read)
Tue Nov 14 13:38:16 2023 kern.notice kernel: [   11.050534] random: jshn: uninitialized urandom read (4 bytes read)
Tue Nov 14 13:38:16 2023 kern.notice kernel: [   11.117658] random: jshn: uninitialized urandom read (4 bytes read)
Tue Nov 14 13:38:16 2023 kern.notice kernel: [   11.508034] random: crng init done
Tue Nov 14 13:38:16 2023 kern.notice kernel: [   11.514942] random: 37 urandom warning(s) missed due to ratelimiting
Tue Nov 14 13:38:17 2023 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Tue Nov 14 13:38:17 2023 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Tue Nov 14 13:38:18 2023 daemon.info dnsmasq[1]: started, version 2.89 cachesize 1000
Tue Nov 14 13:38:18 2023 daemon.info dnsmasq[1]: DNS service limited to local subnets
Tue Nov 14 13:38:18 2023 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-nftset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Tue Nov 14 13:38:18 2023 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Tue Nov 14 13:38:18 2023 daemon.info dnsmasq[1]: using only locally-known addresses for test
Tue Nov 14 13:38:18 2023 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Tue Nov 14 13:38:18 2023 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Tue Nov 14 13:38:18 2023 daemon.info dnsmasq[1]: using only locally-known addresses for local
Tue Nov 14 13:38:18 2023 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Tue Nov 14 13:38:18 2023 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Tue Nov 14 13:38:18 2023 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Tue Nov 14 13:38:18 2023 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Tue Nov 14 13:38:18 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Tue Nov 14 13:38:18 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 0 names
Tue Nov 14 13:38:28 2023 authpriv.info dropbear[1416]: Not backgrounding
Tue Nov 14 13:38:30 2023 daemon.notice wpa_supplicant[1524]: Successfully initialized wpa_supplicant
Tue Nov 14 13:38:30 2023 user.notice : Added device handler type: bonding
Tue Nov 14 13:38:30 2023 user.notice : Added device handler type: 8021ad
Tue Nov 14 13:38:30 2023 user.notice : Added device handler type: 8021q
Tue Nov 14 13:38:30 2023 user.notice : Added device handler type: macvlan
Tue Nov 14 13:38:30 2023 user.notice : Added device handler type: veth
Tue Nov 14 13:38:30 2023 user.notice : Added device handler type: bridge
Tue Nov 14 13:38:30 2023 user.notice : Added device handler type: Network device
Tue Nov 14 13:38:30 2023 user.notice : Added device handler type: tunnel
Tue Nov 14 13:38:30 2023 daemon.notice procd: /etc/rc.d/S25packet_steering: sh: write error: No such file or directory
Tue Nov 14 13:38:30 2023 daemon.notice procd: /etc/rc.d/S25packet_steering: sh: write error: No such file or directory
Tue Nov 14 13:38:31 2023 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/network
Tue Nov 14 13:38:31 2023 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/wireless
Tue Nov 14 13:38:32 2023 user.notice ucitrack: Setting up /etc/config/luci-splash reload dependency on /etc/config/firewall
Tue Nov 14 13:38:32 2023 user.notice ucitrack: Setting up /etc/config/qos reload dependency on /etc/config/firewall
Tue Nov 14 13:38:32 2023 user.notice ucitrack: Setting up /etc/config/miniupnpd reload dependency on /etc/config/firewall
Tue Nov 14 13:38:32 2023 user.notice ucitrack: Setting up /etc/config/odhcpd reload dependency on /etc/config/dhcp
Tue Nov 14 13:38:32 2023 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount
Tue Nov 14 13:38:32 2023 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led
Tue Nov 14 13:38:32 2023 user.notice ucitrack: Setting up /etc/config/luci_statistics reload dependency on /etc/config/system
Tue Nov 14 13:38:32 2023 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/system
Tue Nov 14 13:38:32 2023 kern.info kernel: [   30.558060] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
Tue Nov 14 13:38:32 2023 kern.info kernel: [   30.590964] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
Tue Nov 14 13:38:32 2023 kern.info kernel: [   30.607035] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Tue Nov 14 13:38:32 2023 kern.info kernel: [   30.611492] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
Tue Nov 14 13:38:33 2023 kern.info kernel: [   30.640969] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Tue Nov 14 13:38:33 2023 kern.info kernel: [   30.655516] br-lan: port 1(lan1) entered blocking state
Tue Nov 14 13:38:33 2023 kern.info kernel: [   30.666014] br-lan: port 1(lan1) entered disabled state
Tue Nov 14 13:38:33 2023 kern.info kernel: [   30.678286] device lan1 entered promiscuous mode
Tue Nov 14 13:38:33 2023 kern.info kernel: [   30.687620] device eth0 entered promiscuous mode
Tue Nov 14 13:38:33 2023 daemon.notice netifd: Interface 'lan' is enabled
Tue Nov 14 13:38:33 2023 daemon.notice netifd: Interface 'lan' is setting up now
Tue Nov 14 13:38:33 2023 daemon.notice netifd: Interface 'lan' is now up
Tue Nov 14 13:38:33 2023 kern.info kernel: [   30.724227] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode
Tue Nov 14 13:38:33 2023 kern.info kernel: [   30.740987] br-lan: port 2(lan2) entered blocking state
Tue Nov 14 13:38:33 2023 kern.info kernel: [   30.751553] br-lan: port 2(lan2) entered disabled state
Tue Nov 14 13:38:33 2023 kern.info kernel: [   30.764314] device lan2 entered promiscuous mode
Tue Nov 14 13:38:33 2023 kern.info kernel: [   30.785962] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode
Tue Nov 14 13:38:33 2023 kern.info kernel: [   30.801878] br-lan: port 3(lan3) entered blocking state
Tue Nov 14 13:38:33 2023 kern.info kernel: [   30.812503] br-lan: port 3(lan3) entered disabled state
Tue Nov 14 13:38:33 2023 kern.info kernel: [   30.825481] device lan3 entered promiscuous mode
Tue Nov 14 13:38:33 2023 kern.info kernel: [   30.847669] mt7530-mdio mdio-bus:1f lan4: configuring for phy/gmii link mode
Tue Nov 14 13:38:33 2023 kern.info kernel: [   30.864568] br-lan: port 4(lan4) entered blocking state
Tue Nov 14 13:38:33 2023 kern.info kernel: [   30.875088] br-lan: port 4(lan4) entered disabled state
Tue Nov 14 13:38:33 2023 kern.info kernel: [   30.888165] device lan4 entered promiscuous mode
Tue Nov 14 13:38:33 2023 daemon.notice netifd: Interface 'loopback' is enabled
Tue Nov 14 13:38:33 2023 daemon.notice netifd: Interface 'loopback' is setting up now
Tue Nov 14 13:38:33 2023 daemon.notice netifd: Interface 'loopback' is now up
Tue Nov 14 13:38:33 2023 daemon.err mount_root: no jffs2 marker found
Tue Nov 14 13:38:33 2023 kern.info kernel: [   30.922780] mtk_soc_eth 1e100000.ethernet wan: PHY [mdio-bus:04] driver [MediaTek MT7530 PHY] (irq=POLL)
Tue Nov 14 13:38:33 2023 kern.info kernel: [   30.941956] mtk_soc_eth 1e100000.ethernet wan: configuring for phy/rgmii link mode
Tue Nov 14 13:38:33 2023 kern.notice kernel: [   30.949803] jffs2: notice: (2196) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Tue Nov 14 13:38:33 2023 daemon.notice netifd: Interface 'wan' is enabled
Tue Nov 14 13:38:33 2023 daemon.notice netifd: Interface 'wan6' is enabled
Tue Nov 14 13:38:33 2023 daemon.notice netifd: Network device 'eth0' link is up
Tue Nov 14 13:38:33 2023 daemon.notice netifd: Network device 'lo' link is up
Tue Nov 14 13:38:33 2023 daemon.notice netifd: Interface 'loopback' has link connectivity
Tue Nov 14 13:38:33 2023 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Nov 14 13:38:35 2023 kern.warn kernel: [   33.069064] overlayfs: upper fs does not support tmpfile.
Tue Nov 14 13:38:35 2023 daemon.info mount_root: performing overlay whiteout
Tue Nov 14 13:38:35 2023 daemon.info mount_root: synchronizing overlay
Tue Nov 14 13:38:36 2023 kern.info kernel: [   33.706414] mt7530-mdio mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
Tue Nov 14 13:38:36 2023 kern.info kernel: [   33.722368] br-lan: port 1(lan1) entered blocking state
Tue Nov 14 13:38:36 2023 kern.info kernel: [   33.732863] br-lan: port 1(lan1) entered forwarding state
Tue Nov 14 13:38:36 2023 daemon.notice netifd: Network device 'lan1' link is up
Tue Nov 14 13:38:36 2023 daemon.notice netifd: bridge 'br-lan' link is up
Tue Nov 14 13:38:36 2023 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Nov 14 13:38:36 2023 kern.info kernel: [   33.744541] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Tue Nov 14 13:38:36 2023 daemon.err odhcpd[1796]: Failed to send to fe80::c079:e651:c7fb:bee9%lan@br-lan (Address not available)
Tue Nov 14 13:38:37 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Tue Nov 14 13:38:37 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 0 names
Tue Nov 14 13:38:37 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c.2228 - 0 names
Tue Nov 14 13:38:37 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 0 names
Tue Nov 14 13:38:37 2023 daemon.err odhcpd[1796]: Failed to send to fe80::c079:e651:c7fb:bee9%lan@br-lan (Address not available)
Tue Nov 14 13:38:37 2023 daemon.err mount_root: failed to sync jffs2 overlay
Tue Nov 14 13:38:39 2023 daemon.notice procd: /etc/rc.d/S96led: setting up led wan
Tue Nov 14 13:38:39 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Tue Nov 14 13:38:39 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 0 names
Tue Nov 14 13:38:39 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c.2228 - 4 names
Tue Nov 14 13:38:39 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 2 names
Tue Nov 14 13:38:39 2023 daemon.info procd: - init complete -
Tue Nov 14 13:38:40 2023 daemon.info dnsmasq[1]: exiting on receipt of SIGTERM
Tue Nov 14 13:38:40 2023 daemon.info dnsmasq[1]: started, version 2.89 cachesize 1000
Tue Nov 14 13:38:40 2023 daemon.info dnsmasq[1]: DNS service limited to local subnets
Tue Nov 14 13:38:40 2023 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-nftset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Tue Nov 14 13:38:40 2023 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Tue Nov 14 13:38:40 2023 daemon.info dnsmasq-dhcp[1]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Tue Nov 14 13:38:40 2023 daemon.info dnsmasq[1]: using only locally-known addresses for test
Tue Nov 14 13:38:40 2023 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Tue Nov 14 13:38:40 2023 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Tue Nov 14 13:38:40 2023 daemon.info dnsmasq[1]: using only locally-known addresses for local
Tue Nov 14 13:38:40 2023 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Tue Nov 14 13:38:40 2023 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Tue Nov 14 13:38:40 2023 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Tue Nov 14 13:38:40 2023 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Tue Nov 14 13:38:40 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Tue Nov 14 13:38:40 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 4 names
Tue Nov 14 13:38:40 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 2 names
Tue Nov 14 13:38:40 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Tue Nov 14 13:38:40 2023 daemon.warn odhcpd[1796]: No default route present, overriding ra_lifetime!
Tue Nov 14 13:38:42 2023 daemon.info urandom_seed[2538]: Seed saved (/etc/urandom.seed)
Tue Nov 14 13:38:42 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Tue Nov 14 13:38:42 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 4 names
Tue Nov 14 13:38:42 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 2 names
Tue Nov 14 13:38:42 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Tue Nov 14 13:38:44 2023 daemon.warn odhcpd[1796]: No default route present, overriding ra_lifetime!
Tue Nov 14 13:38:53 2023 daemon.warn odhcpd[1796]: No default route present, overriding ra_lifetime!
Tue Nov 14 13:48:45 2023 daemon.warn odhcpd[1796]: No default route present, overriding ra_lifetime!
Tue Nov 14 13:49:19 2023 daemon.err uhttpd[887]: [info] luci: accepted login on / for root from 192.168.1.66
Tue Nov 14 13:50:00 2023 authpriv.info dropbear[1416]: Early exit: Terminated by signal
Tue Nov 14 13:50:00 2023 authpriv.info dropbear[3141]: Not backgrounding
Tue Nov 14 13:50:57 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Tue Nov 14 13:50:57 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 4 names
Tue Nov 14 13:50:57 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 2 names
Tue Nov 14 13:50:57 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Tue Nov 14 13:50:58 2023 daemon.notice netifd: Interface 'lan' is now down
Tue Nov 14 13:50:58 2023 kern.info kernel: [  775.700144] br-lan: port 1(lan1) entered disabled state
Tue Nov 14 13:50:58 2023 daemon.warn odhcpd[1796]: No default route present, overriding ra_lifetime!
Tue Nov 14 13:50:58 2023 daemon.err odhcpd[1796]: Failed to send to ff02::1%lan@br-lan (Network unreachable)
Tue Nov 14 13:50:58 2023 kern.info kernel: [  775.716101] device lan1 left promiscuous mode
Tue Nov 14 13:50:58 2023 kern.info kernel: [  775.725168] br-lan: port 1(lan1) entered disabled state
Tue Nov 14 13:50:58 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Tue Nov 14 13:50:58 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 4 names
Tue Nov 14 13:50:58 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 0 names
Tue Nov 14 13:50:58 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Tue Nov 14 13:50:58 2023 kern.info kernel: [  775.806413] mt7530-mdio mdio-bus:1f lan1: Link is Down
Tue Nov 14 13:50:58 2023 kern.info kernel: [  775.818375] device lan2 left promiscuous mode
Tue Nov 14 13:50:58 2023 kern.info kernel: [  775.827420] br-lan: port 2(lan2) entered disabled state
Tue Nov 14 13:50:58 2023 kern.info kernel: [  775.907547] device lan3 left promiscuous mode
Tue Nov 14 13:50:58 2023 kern.info kernel: [  775.916549] br-lan: port 3(lan3) entered disabled state
Tue Nov 14 13:50:58 2023 kern.info kernel: [  775.987745] device lan4 left promiscuous mode
Tue Nov 14 13:50:58 2023 kern.info kernel: [  775.996762] br-lan: port 4(lan4) entered disabled state
Tue Nov 14 13:50:58 2023 kern.info kernel: [  776.060806] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
Tue Nov 14 13:50:58 2023 daemon.notice netifd: Interface 'lan' is disabled
Tue Nov 14 13:50:58 2023 daemon.notice netifd: Interface 'lan' has link connectivity loss
Tue Nov 14 13:50:58 2023 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Nov 14 13:50:58 2023 kern.info kernel: [  776.259063] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
Tue Nov 14 13:50:58 2023 kern.info kernel: [  776.274825] device eth0 left promiscuous mode
Tue Nov 14 13:50:58 2023 kern.info kernel: [  776.284070] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Tue Nov 14 13:50:58 2023 kern.info kernel: [  776.287941] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
Tue Nov 14 13:50:58 2023 kern.info kernel: [  776.316258] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Tue Nov 14 13:50:58 2023 kern.info kernel: [  776.329608] br-lan: port 1(lan1) entered blocking state
Tue Nov 14 13:50:58 2023 kern.info kernel: [  776.340154] br-lan: port 1(lan1) entered disabled state
Tue Nov 14 13:50:58 2023 kern.info kernel: [  776.352452] device lan1 entered promiscuous mode
Tue Nov 14 13:50:58 2023 kern.info kernel: [  776.361863] device eth0 entered promiscuous mode
Tue Nov 14 13:50:58 2023 kern.info kernel: [  776.379173] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode
Tue Nov 14 13:50:58 2023 kern.info kernel: [  776.394862] br-lan: port 2(lan2) entered blocking state
Tue Nov 14 13:50:58 2023 kern.info kernel: [  776.405399] br-lan: port 2(lan2) entered disabled state
Tue Nov 14 13:50:58 2023 kern.info kernel: [  776.417752] device lan2 entered promiscuous mode
Tue Nov 14 13:50:58 2023 kern.info kernel: [  776.432436] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode
Tue Nov 14 13:50:58 2023 kern.info kernel: [  776.447859] br-lan: port 3(lan3) entered blocking state
Tue Nov 14 13:50:58 2023 kern.info kernel: [  776.458362] br-lan: port 3(lan3) entered disabled state
Tue Nov 14 13:50:58 2023 kern.info kernel: [  776.470674] device lan3 entered promiscuous mode
Tue Nov 14 13:50:58 2023 kern.info kernel: [  776.485484] mt7530-mdio mdio-bus:1f lan4: configuring for phy/gmii link mode
Tue Nov 14 13:50:58 2023 kern.info kernel: [  776.500774] br-lan: port 4(lan4) entered blocking state
Tue Nov 14 13:50:58 2023 kern.info kernel: [  776.511272] br-lan: port 4(lan4) entered disabled state
Tue Nov 14 13:50:58 2023 kern.info kernel: [  776.523860] device lan4 entered promiscuous mode
Tue Nov 14 13:50:58 2023 daemon.notice netifd: Interface 'lan' is enabled
Tue Nov 14 13:50:58 2023 daemon.notice netifd: Interface 'lan' is setting up now
Tue Nov 14 13:50:58 2023 daemon.notice netifd: Interface 'lan' is now up
Tue Nov 14 13:50:58 2023 daemon.notice netifd: bridge 'br-lan' link is down
Tue Nov 14 13:50:58 2023 daemon.notice netifd: Interface 'lan' has link connectivity loss
Tue Nov 14 13:50:58 2023 daemon.notice netifd: Network device 'lan1' link is down
Tue Nov 14 13:50:58 2023 daemon.notice netifd: Network device 'eth0' link is down
Tue Nov 14 13:50:58 2023 daemon.notice netifd: Network device 'eth0' link is up
Tue Nov 14 13:50:59 2023 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Tue Nov 14 13:51:00 2023 daemon.info dnsmasq[1]: exiting on receipt of SIGTERM
Tue Nov 14 13:51:00 2023 daemon.info dnsmasq[1]: started, version 2.89 cachesize 1000
Tue Nov 14 13:51:00 2023 daemon.info dnsmasq[1]: DNS service limited to local subnets
Tue Nov 14 13:51:00 2023 daemon.info dnsmasq[1]: compile time options: IPv6 GNU-getopt no-DBus UBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-nftset no-auth no-cryptohash no-DNSSEC no-ID loop-detect inotify dumpfile
Tue Nov 14 13:51:00 2023 daemon.info dnsmasq[1]: UBus support enabled: connected to system bus
Tue Nov 14 13:51:00 2023 daemon.info dnsmasq-dhcp[1]: DHCP, IP range 192.168.66.100 -- 192.168.66.249, lease time 12h
Tue Nov 14 13:51:00 2023 daemon.info dnsmasq[1]: using only locally-known addresses for test
Tue Nov 14 13:51:00 2023 daemon.info dnsmasq[1]: using only locally-known addresses for onion
Tue Nov 14 13:51:00 2023 daemon.info dnsmasq[1]: using only locally-known addresses for localhost
Tue Nov 14 13:51:00 2023 daemon.info dnsmasq[1]: using only locally-known addresses for local
Tue Nov 14 13:51:00 2023 daemon.info dnsmasq[1]: using only locally-known addresses for invalid
Tue Nov 14 13:51:00 2023 daemon.info dnsmasq[1]: using only locally-known addresses for bind
Tue Nov 14 13:51:00 2023 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Tue Nov 14 13:51:00 2023 daemon.warn dnsmasq[1]: no servers found in /tmp/resolv.conf.d/resolv.conf.auto, will retry
Tue Nov 14 13:51:00 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Tue Nov 14 13:51:00 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 4 names
Tue Nov 14 13:51:00 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 0 names
Tue Nov 14 13:51:00 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Tue Nov 14 13:51:01 2023 authpriv.info dropbear[3141]: Early exit: Terminated by signal
Tue Nov 14 13:51:01 2023 authpriv.warn dropbear[3835]: Failed listening on '22': Error listening: Address not available
Tue Nov 14 13:51:01 2023 authpriv.info dropbear[3835]: Not backgrounding
Tue Nov 14 13:51:01 2023 kern.info kernel: [  779.065594] mt7530-mdio mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
Tue Nov 14 13:51:01 2023 kern.info kernel: [  779.081531] br-lan: port 1(lan1) entered blocking state
Tue Nov 14 13:51:01 2023 kern.info kernel: [  779.092062] br-lan: port 1(lan1) entered forwarding state
Tue Nov 14 13:51:01 2023 daemon.notice netifd: Network device 'lan1' link is up
Tue Nov 14 13:51:01 2023 daemon.notice netifd: bridge 'br-lan' link is up
Tue Nov 14 13:51:01 2023 daemon.notice netifd: Interface 'lan' has link connectivity
Tue Nov 14 13:51:01 2023 kern.info kernel: [  779.104081] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Tue Nov 14 13:51:03 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Tue Nov 14 13:51:03 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 4 names
Tue Nov 14 13:51:03 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 0 names
Tue Nov 14 13:51:03 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Tue Nov 14 13:51:05 2023 daemon.warn odhcpd[1796]: No default route present, overriding ra_lifetime!
Tue Nov 14 13:51:09 2023 daemon.warn odhcpd[1796]: No default route present, overriding ra_lifetime!
Tue Nov 14 13:51:11 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Tue Nov 14 13:51:11 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 4 names
Tue Nov 14 13:51:11 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 2 names
Tue Nov 14 13:51:11 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Tue Nov 14 13:51:18 2023 daemon.warn odhcpd[1796]: No default route present, overriding ra_lifetime!
Tue Nov 14 13:54:55 2023 daemon.warn odhcpd[1796]: No default route present, overriding ra_lifetime!
Tue Nov 14 13:55:42 2023 daemon.err uhttpd[887]: [info] luci: accepted login on / for root from 192.168.66.7
Tue Nov 14 13:55:54 2023 auth.err passwd: password for root changed by root
Tue Nov 14 13:56:10 2023 daemon.err uhttpd[887]: [info] luci: accepted login on / for root from 192.168.66.7
Tue Nov 14 13:57:04 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Tue Nov 14 13:57:04 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 4 names
Tue Nov 14 13:57:04 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 2 names
Tue Nov 14 13:57:04 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Tue Nov 14 13:57:06 2023 daemon.info logread[4941]: Logread connected to 192.168.66.7:514 via udp
Tue Nov 14 13:57:06 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Tue Nov 14 13:57:06 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 4 names
Tue Nov 14 13:57:06 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 2 names
Tue Nov 14 13:57:06 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Tue Nov 14 13:57:07 2023 daemon.warn odhcpd[1796]: No default route present, overriding ra_lifetime!
Wed Dec 13 13:47:04 2023 daemon.err uhttpd[887]: [info] luci: accepted login on / for root from 192.168.66.7
Wed Dec 13 13:47:53 2023 daemon.warn odhcpd[1796]: No default route present, overriding ra_lifetime!
Wed Dec 13 13:54:56 2023 daemon.notice netifd: radio1 (5387): WARNING: Variable 'data' does not exist or is not an array/object
Wed Dec 13 13:54:56 2023 daemon.notice hostapd: Set new config for phy phy1:
Wed Dec 13 13:54:56 2023 daemon.notice wpa_supplicant[1524]: Set new config for phy phy1
Wed Dec 13 13:54:56 2023 daemon.notice wpa_supplicant[1524]: Set new config for phy phy1
Wed Dec 13 13:54:56 2023 daemon.notice hostapd: Set new config for phy phy1: /var/run/hostapd-phy1.conf
Wed Dec 13 13:54:56 2023 daemon.notice hostapd: Restart interface for phy phy1
Wed Dec 13 13:54:56 2023 daemon.notice hostapd: Configuration file: data: driver=nl80211 logger_syslog=127 logger_syslog_level=2 logger_stdout=127 logger_stdout_level=2 hw_mode=a beacon_int=100 chanlist=36 tx_queue_data2_burst=2.0 #num_global_macaddr=1 ieee80211n=1 ht_coex=0 ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1] ieee80211ac=1 vht_oper_chwidth=1 vht_oper_centr_freq_seg0_idx=42 vht_capab=[RXLDPC][SHORT-GI-80][SHORT-GI-160][TX-STBC-2BY1][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN][RX-STBC-1][VHT160-80PLUS80][MAX-A-MPDU-LEN-EXP7] channel=36  interface=phy1-ap0 bssid=28:3b:82:24:c0:11 ctrl_interface=/var/run/hostapd ap_isolate=1 bss_load_update_period=60 chan_util_avg_period=600 disassoc_low_ack=1 skip_inactivity_poll=0 preamble=1 wmm_enabled=1 ignore_broadcast_ssid=0 uapsd_advertisement_enabled=1 utf8_ssid=1 multi_ap=0 auth_algs=1 wpa=0 ssid=OpenWrt bridge=br-lan wds_bridge= snoop_iface=br-lan qos_map_set=0,0,2,16,1,1,255,255,18,22,24,38,40,40,44,46,48,56 #default_macaddr nas_identifier=283bXXXXXXX1  (phy
Wed Dec 13 13:54:58 2023 kern.info kernel: [ 1907.365336] br-lan: port 5(phy1-ap0) entered blocking state
Wed Dec 13 13:54:58 2023 kern.info kernel: [ 1907.376544] br-lan: port 5(phy1-ap0) entered disabled state
Wed Dec 13 13:54:58 2023 kern.info kernel: [ 1907.388290] device phy1-ap0 entered promiscuous mode
Wed Dec 13 13:54:58 2023 kern.info kernel: [ 1907.403163] device phy1-ap0 left promiscuous mode
Wed Dec 13 13:54:58 2023 kern.info kernel: [ 1907.412876] br-lan: port 5(phy1-ap0) entered disabled state
Wed Dec 13 13:54:58 2023 daemon.notice hostapd: phy1-ap0: interface state UNINITIALIZED->HT_SCAN
Wed Dec 13 13:54:58 2023 kern.info kernel: [ 1907.467462] br-lan: port 5(phy1-ap0) entered blocking state
Wed Dec 13 13:54:58 2023 kern.info kernel: [ 1907.478721] br-lan: port 5(phy1-ap0) entered disabled state
Wed Dec 13 13:54:58 2023 kern.info kernel: [ 1907.490528] device phy1-ap0 entered promiscuous mode
Wed Dec 13 13:54:58 2023 daemon.notice netifd: Wireless device 'radio1' is now up
Wed Dec 13 13:54:59 2023 daemon.info dnsmasq[1]: read /etc/hosts - 12 names
Wed Dec 13 13:54:59 2023 daemon.info dnsmasq[1]: read /tmp/hosts/dhcp.cfg01411c - 4 names
Wed Dec 13 13:54:59 2023 daemon.info dnsmasq[1]: read /tmp/hosts/odhcpd - 2 names
Wed Dec 13 13:54:59 2023 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Wed Dec 13 13:55:00 2023 kern.info kernel: [ 1909.617578] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap0: link becomes ready
Wed Dec 13 13:55:00 2023 kern.info kernel: [ 1909.631167] br-lan: port 5(phy1-ap0) entered blocking state
Wed Dec 13 13:55:00 2023 kern.info kernel: [ 1909.642333] br-lan: port 5(phy1-ap0) entered forwarding state
Wed Dec 13 13:55:00 2023 daemon.notice netifd: Network device 'phy1-ap0' link is up
Wed Dec 13 13:55:00 2023 daemon.notice hostapd: phy1-ap0: interface state HT_SCAN->ENABLED
Wed Dec 13 13:55:00 2023 daemon.notice hostapd: phy1-ap0: AP-ENABLED
Wed Dec 13 13:55:00 2023 daemon.warn odhcpd[1796]: No default route present, overriding ra_lifetime!
Wed Dec 13 14:00:43 2023 daemon.warn odhcpd[1796]: No default route present, overriding ra_lifetime!
Wed Dec 13 14:07:59 2023 daemon.warn odhcpd[1796]: No default route present, overriding ra_lifetime!
Wed Dec 13 14:12:07 2023 daemon.warn odhcpd[1796]: No default route present, overriding ra_lifetime!

Thanks for replying.
I did not do any backups and I don't know what calibration data is. My router should have BR country codes. I'm going to search for calibration data "art" to understand what it is. Thanks.

the new snapshots and the newer versions that will be released have changes
the new factory image is encrypted and the recovery image is not encrypted
so recovery for the recovery console & factory for the dlink firmware after v1.4

  • just a note snapshots don't have luci in by default so no web interface

you can send your factory file to lucky@luckys.onmypc.net
i should be able to tell if it's corrupted or not at lest

Is this calibration data way too big to brute force some valid values?

If ART is damaged or corrupted without a backup, you'll need software and equipment from the WiFi chip maker to re-create calibration data for your individual device. This expensive equipment is not generally available to end consumers - and usually only provided to the manufacturer of the finished board.

Someone else's ART copy might work, but will not be as effective as an actual calibration of your device.

What does this kern.err mean?

Tue Nov 14 13:38:16 2023 kern.notice kernel: [    2.174247] 4 fixed-partitions partitions found on MTD device spi0.0
Tue Nov 14 13:38:16 2023 kern.err kernel: [    2.186949] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
Tue Nov 14 13:38:16 2023 kern.err kernel: [    2.201548] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
Tue Nov 14 13:38:16 2023 kern.err kernel: [    2.216769] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
Tue Nov 14 13:38:16 2023 kern.err kernel: [    2.231443] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    2.246310] Creating 4 MTD partitions on "spi0.0":
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    2.255878] 0x000000000000-0x000000030000 : "u-boot"
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    2.267126] 0x000000030000-0x000000040000 : "u-boot-env"
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    2.278827] 0x000000040000-0x000000060000 : "factory"
Tue Nov 14 13:38:16 2023 kern.notice kernel: [    2.290253] 0x000000060000-0x000001000000 : "firmware"

calibration data is small
but as lleachii has stated it's custom generated for your device
but if dd-wrt has changed only some of the configuration layout
stuff maybe if can be fixed but if the radio profile is gone you have lots it
you can try another device's calibration but well it will never be the same as it was

I just had a look at you calibration data
and from what I can tell it's ok
there are no erased blocks and looks intact

1 Like

Thank you.