[ 0.000000] Linux version 4.14.180 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11063-85e04e9f46)) #0 SMP Sat May 16 18:32:20 2020
[ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[ 0.000000] MIPS: machine is Xiaomi Mi Router 3 Pro
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 1c000000 @ 00000000 (usable)
[ 0.000000] memory: 04000000 @ 20000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] VPE topology {2,2} total 4
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
[ 0.000000] HighMem [mem 0x0000000010000000-0x0000000023ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000001bffffff]
[ 0.000000] node 0: [mem 0x0000000020000000-0x0000000023ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000023ffffff]
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat 805727a0, node_mem_map 81003000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65536 pages, LIFO batch:15
[ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
[ 0.000000] random: get_random_bytes called from 0x80575744 with crng_init=0
[ 0.000000] percpu: Embedded 14 pages/cpu s26224 r8192 d22928 u57344
[ 0.000000] pcpu-alloc: s26224 r8192 d22928 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130560
[ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Writing ErrCtl register=00058000
[ 0.000000] Readback ErrCtl register=00058000
[ 0.000000] Memory: 512044K/524288K available (4748K kernel code, 239K rwdata, 588K rodata, 1260K init, 255K bss, 12244K reserved, 0K cma-reserved, 262144K highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 256
[ 0.000000] CPU Clock: 880MHz
[ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
[ 0.007819] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[ 0.073985] pid_max: default: 32768 minimum: 301
[ 0.078759] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.085268] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.094085] Hierarchical SRCU implementation.
[ 0.099252] smp: Bringing up secondary CPUs ...
[ 0.104458] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.104467] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.104478] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.104612] CPU1 revision is: 0001992f (MIPS 1004Kc)
[ 0.164006] Synchronize counters for CPU 1: done.
[ 0.198312] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.198321] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.198328] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.198396] CPU2 revision is: 0001992f (MIPS 1004Kc)
[ 0.255159] Synchronize counters for CPU 2: done.
[ 0.285610] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.285617] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.285624] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[ 0.285699] CPU3 revision is: 0001992f (MIPS 1004Kc)
[ 0.340342] Synchronize counters for CPU 3: done.
[ 0.370194] smp: Brought up 1 node, 4 CPUs
[ 0.378089] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.387882] futex hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.394177] pinctrl core: initialized pinctrl subsystem
[ 0.400806] NET: Registered protocol family 16
[ 0.410624] FPU Affinity set after 11720 emulations
[ 0.411339] pull PCIe RST: RALINK_RSTCTRL = 4000000
[ 0.716617] release PCIe RST: RALINK_RSTCTRL = 7000000
[ 0.721663] ***** Xtal 40MHz *****
[ 0.725021] release PCIe RST: RALINK_RSTCTRL = 7000000
[ 0.730120] Port 0 N_FTS = 1b105000
[ 0.733590] Port 1 N_FTS = 1b105000
[ 0.737028] Port 2 N_FTS = 1b102800
[ 1.892300] PCIE2 no card, disable it(RST&CLK)
[ 1.896660] -> 21007f2
[ 1.899061] PCIE0 enabled
[ 1.901653] PCIE1 enabled
[ 1.904258] PCI host bridge /pcie@1e140000 ranges:
[ 1.909030] MEM 0x0000000060000000..0x000000006fffffff
[ 1.914192] IO 0x000000001e160000..0x000000001e16ffff
[ 1.919388] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
[ 1.935283] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 1.941143] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 1.946919] mt7621_gpio 1e000600.gpio: registering 32 gpios
[ 1.954679] PCI host bridge to bus 0000:00
[ 1.958705] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[ 1.965543] pci_bus 0000:00: root bus resource [io 0xffffffff]
[ 1.971393] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[ 1.978160] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.986043] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[ 1.986082] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[ 1.986094] pci 0000:00:00.0: reg 0x14: [mem 0x60200000-0x6020ffff]
[ 1.986158] pci 0000:00:00.0: supports D1
[ 1.986167] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 1.986390] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[ 1.986416] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[ 1.986429] pci 0000:00:01.0: reg 0x14: [mem 0x60210000-0x6021ffff]
[ 1.986479] pci 0000:00:01.0: supports D1
[ 1.986487] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[ 1.986886] pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280
[ 1.986935] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[ 1.987232] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.987402] pci 0000:02:00.0: [14c3:7615] type 00 class 0x000280
[ 1.987449] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
[ 1.987743] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 1.987761] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 02
[ 1.987825] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[ 1.994360] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[ 2.001248] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[ 2.007825] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[ 2.014732] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[ 2.021480] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
[ 2.028207] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
[ 2.034968] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
[ 2.041688] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
[ 2.048964] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 2.053870] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
[ 2.060632] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
[ 2.067872] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 2.072799] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
[ 2.080895] clocksource: Switched to clocksource GIC
[ 2.087457] NET: Registered protocol family 2
[ 2.092602] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 2.099493] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 2.105921] TCP: Hash tables configured (established 2048 bind 2048)
[ 2.112351] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 2.118119] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 2.124585] NET: Registered protocol family 1
[ 2.128906] PCI: CLS 0 bytes, default 32
[ 2.360839] 4 CPUs re-calibrate udelay(lpj = 2924544)
[ 2.367242] Crashlog allocated RAM at address 0x3f00000
[ 2.372659] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 2.382887] random: fast init done
[ 2.389148] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.394983] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 2.407931] bounce: pool size: 64 pages
[ 2.411770] io scheduler noop registered
[ 2.415596] io scheduler deadline registered (default)
[ 2.421810] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 2.431077] console [ttyS0] disabled
[ 2.434624] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
[ 2.443617] console [ttyS0] enabled
[ 2.450468] bootconsole [early0] disabled
[ 2.460528] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
[ 2.467731] Enable NFI Clock
[ 2.470601] # MTK NAND # : Use HW ECC
[ 2.474293] Device found in MTK table, ID: 2cda, EXT_ID: 909506
[ 2.480186] Support this Device in MTK table! 2cda
[ 2.485157] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
[ 2.491635] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 2.497956] nand: Micron NAND 256MiB 3,3V 8-bit
[ 2.502488] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 2.510039] Scanning device for bad blocks
[ 2.529545] Bad eraseblock 59 at 0x000000760000
[ 2.546872] Bad eraseblock 109 at 0x000000da0000
[ 2.566613] Bad eraseblock 168 at 0x000001500000
[ 2.572908] Bad eraseblock 175 at 0x0000015e0000
[ 2.590051] Bad eraseblock 224 at 0x000001c00000
[ 2.595054] Bad eraseblock 226 at 0x000001c40000
[ 2.790588] Bad eraseblock 964 at 0x000007880000
[ 3.075656] 10 fixed-partitions partitions found on MTD device MT7621-NAND
[ 3.082514] Creating 10 MTD partitions on "MT7621-NAND":
[ 3.087808] 0x000000000000-0x000000040000 : "Bootloader"
[ 3.094109] 0x000000040000-0x000000080000 : "Config"
[ 3.099846] 0x000000080000-0x0000000c0000 : "Bdata"
[ 3.105605] 0x0000000c0000-0x000000100000 : "Factory"
[ 3.111595] 0x000000100000-0x000000140000 : "crash"
[ 3.117317] 0x000000140000-0x0000001c0000 : "crash_syslog"
[ 3.123696] 0x0000001c0000-0x000000200000 : "reserved0"
[ 3.129756] 0x000000200000-0x000000600000 : "kernel_stock"
[ 3.136160] 0x000000600000-0x000000a00000 : "kernel"
[ 3.142035] 0x000000a00000-0x00000ff80000 : "ubi"
[ 3.149436] [mtk_nand] probe successfully!
[ 3.154277] Signature matched and data read!
[ 3.158525] load_fact_bbt success 2047
[ 3.162883] libphy: Fixed MDIO Bus: probed
[ 3.233471] libphy: mdio: probed
[ 4.637139] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
[ 4.643825] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
[ 4.654752] NET: Registered protocol family 10
[ 4.660762] Segment Routing with IPv6
[ 4.664541] NET: Registered protocol family 17
[ 4.669034] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 4.681949] 8021q: 802.1Q VLAN Support v1.8
[ 4.689140] UBI: auto-attach mtd9
[ 4.692523] ubi0: attaching mtd9
[ 6.345186] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 6.685888] mtk_soc_eth 1e100000.ethernet eth0: port 4 link up
[ 6.941738] ubi0: scanning is finished
[ 6.962879] ubi0: attached mtd9 (name "ubi", size 245 MiB)
[ 6.968357] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 6.975223] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 6.981993] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 6.988920] ubi0: good PEBs: 1958, bad PEBs: 6, corrupted PEBs: 0
[ 6.994995] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 7.002199] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 3350229377
[ 7.011306] ubi0: available PEBs: 0, total reserved PEBs: 1958, PEBs reserved for bad PEB handling: 34
[ 7.020591] ubi0: background thread "ubi_bgt0d" started, PID 397
[ 7.022620] block ubiblock0_0: created from ubi0:0(rootfs)
[ 7.032062] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 7.039001] hctosys: unable to open rtc device (rtc0)
[ 7.044292] usb_vbus: disabling
[ 7.054001] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 7.065455] Freeing unused kernel memory: 1260K
[ 7.069980] This architecture does not have kernel memory protection.
[ 7.636078] init: Console is alive
[ 7.639723] init: - watchdog -
[ 7.663500] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 8.285761] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 8.356885] usbcore: registered new interface driver usbfs
[ 8.362561] usbcore: registered new interface driver hub
[ 8.368023] usbcore: registered new device driver usb
[ 8.380429] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
[ 8.389423] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 8.394772] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[ 8.411040] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
[ 8.420209] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
[ 8.426952] hub 1-0:1.0: USB hub found
[ 8.430776] hub 1-0:1.0: 2 ports detected
[ 8.435474] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[ 8.440787] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[ 8.448286] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
[ 8.454887] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 8.463842] hub 2-0:1.0: USB hub found
[ 8.467655] hub 2-0:1.0: 1 port detected
[ 8.476937] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 8.501204] init: - preinit -
[ 9.205421] mtk_soc_eth 1e100000.ethernet: PPE started
[ 9.280187] random: procd: uninitialized urandom read (4 bytes read)
[ 10.466191] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 11.773001] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 12.427257] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 503
[ 12.500057] UBIFS (ubi0:1): recovery needed
[ 12.659293] UBIFS (ubi0:1): recovery completed
[ 12.663904] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 12.671715] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 12.681602] UBIFS (ubi0:1): FS size: 238968832 bytes (227 MiB, 1882 LEBs), journal size 11935744 bytes (11 MiB, 94 LEBs)
[ 12.692432] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 12.699019] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 062AE30E-57A5-443C-8242-1D73F8C86431, small LPT model
[ 12.716826] mount_root: switching to ubifs overlay
[ 12.749497] urandom-seed: Seeding with /etc/urandom.seed
[ 12.845008] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
[ 12.859912] procd: - early -
[ 12.862929] procd: - watchdog -
[ 13.581050] procd: - watchdog -
[ 13.584513] procd: - ubus -
[ 13.654188] random: ubusd: uninitialized urandom read (4 bytes read)
[ 13.664212] random: ubusd: uninitialized urandom read (4 bytes read)
[ 13.671073] random: ubusd: uninitialized urandom read (4 bytes read)
[ 13.678263] procd: - init -
[ 14.157779] kmodloader: loading kernel modules from /etc/modules.d/*
[ 14.222867] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.235160] Loading modules backported from Linux version v4.19.120-0-gfdc072324f3c
[ 14.242986] Backport generated by backports.git v4.19.120-1-0-g60c3a249
[ 14.251456] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.263406] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 14.305844] xt_time: kernel timezone is -0000
[ 14.353856] bus=0x1, slot = 0x0, irq=0x0
[ 14.370723] urngd: v1.0.2 started.
[ 14.381636] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
[ 14.381636]
[ 14.507853] random: crng init done
[ 14.511286] random: 6 urandom warning(s) missed due to ratelimiting
[ 14.597383] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
[ 14.615240] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
[ 14.650185] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 15.967417] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 18.872745] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 20.162245] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 22.249834] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 22.252965] bus=0x2, slot = 0x1, irq=0x0
[ 22.281444] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
[ 22.281444]
[ 22.307091] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
[ 22.325222] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
[ 22.906188] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 24.188858] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 27.026730] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 28.382258] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 29.982236] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 29.989305] PPP generic driver version 2.4.2
[ 29.995100] NET: Registered protocol family 24
[ 30.002435] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 30.810453] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 36.159923] mtk_soc_eth 1e100000.ethernet: PPE started
[ 36.171787] device eth0 entered promiscuous mode
[ 36.177519] br-lan: port 1(eth0.1) entered blocking state
[ 36.183098] br-lan: port 1(eth0.1) entered disabled state
[ 36.189158] device eth0.1 entered promiscuous mode
[ 36.199105] br-lan: port 1(eth0.1) entered blocking state
[ 36.204590] br-lan: port 1(eth0.1) entered forwarding state
[ 36.210706] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 37.161816] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 39.291613] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 39.301332] br-lan: port 2(wlan0) entered blocking state
[ 39.306634] br-lan: port 2(wlan0) entered disabled state
[ 39.312484] device wlan0 entered promiscuous mode
[ 40.477171] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 40.483822] br-lan: port 2(wlan0) entered blocking state
[ 40.489114] br-lan: port 2(wlan0) entered forwarding state
[ 296.774694] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 299.575050] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 301.796253] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 304.561112] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 305.874238] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 308.716153] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 310.068036] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 312.780111] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 314.095280] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 316.575399] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 372.273720] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 375.076110] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 598.790348] mtk_soc_eth 1e100000.ethernet eth0: port 4 link down
[ 600.656935] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 639.987003] mtk_soc_eth 1e100000.ethernet eth0: port 4 link up
[ 650.761644] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 652.066876] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 654.781192] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 656.094215] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 658.951191] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 660.288337] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 662.640371] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 772.513283] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 775.370014] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 776.720867] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 779.561127] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 780.915065] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 783.716051] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 785.024975] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 787.390332] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 897.252570] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 900.135016] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 907.149139] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 909.904990] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 911.187665] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 914.024918] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 915.382113] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 918.170017] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 924.199535] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 926.905996] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 928.217023] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 931.151609] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 932.494529] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 935.279926] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 936.604608] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 939.135275] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 1081.937472] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 1084.759926] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 1086.087677] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 1088.826005] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 1090.114925] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 1092.996006] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
[ 1094.309048] mtk_soc_eth 1e100000.ethernet eth0: port 3 link down
[ 1096.640210] mtk_soc_eth 1e100000.ethernet eth0: port 3 link up
- Have you tried another cable?
- Have you tried to connect to another port?
- Does it have the same behavior if you connect another device on port 3?
1 Like
tried with another port, seems the issue is resolved now.
1 Like
This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.