(I'm sorry. I was using the old url so my post was plain wrong. I removed it)
1 Like
I'm wondering if there isn't a defect somewhere. By the way... Just delete the 3rd radio as it isn't supported, and can cause issues.
Ok, I solved this issue by factory resetting one router and reconfiguring. Getting pretty fast at it now! That solved the problem.
So a question. I had configured one router and to save time I saved it's configuration.
When I installed openWRT on the second one, I imported the configuration. Changed name, IP address, and wireless name and credentials. So is it possible that something remained which was causing the radio issue that I was seeing? Thanks.
1 Like
Seems like you changed enough to not cause an issue.
hi,
guys i'm need donload and intall kmod-bridge this is for i try configure correc my IGMP for my IPTV.
I'm try Davidc oficial repo, but dont have it..
thankd for help end sorry my inglsh
kmod-bridge is no longer needed as it it built into the kernel.
IGMP works fine for IPTV, and shouldn't have any issues once configured.
1 Like
New builds were just uploaded to the server. I'm afraid there have been no new commits/changes with the wifi driver or wifi firmware since the last build. However there have been some kernel bumps and various package fixes/upgrades.
Kernel version = 4.14.109
WiFi driver = 10.3.8.0-20181210
Build = r9813
3 Likes
Thanks for your hard works for make a best FW for we router.
I will download e install for my 3200 and 1900
Thaks !! 
1 Like
Hello, davidc502.
I'm running OpenWRT SNAPSHOT.
In Software section, New driver,firmware version was displayed. I'm curious about this. 2019-03-02? New version released?
This seems to be the only change: https://github.com/kaloz/mwlwifi/commit/31d9386079b91cc699658c19294e139b62b512bc
1 Like
Is the latest.
Hi, I have a WRT1900acs v2 with ddwrt (in both partitions) but I would like to try openwrt. Is to possible to upgrade directly from ddwrt to openwrt?Thanks
r9813 is having very frequent reboots on my WRT1900AC v1. Haven't had any issues with any build since the CPU Idle bug was fixed. I run near stock config and use factory upgrade from the Linksys partition. I'm reverting back for now.
1 Like
The short answer is no. If you want to try it, use the .img and don't attempt to save any settings from DD-WRT.
1 Like
hi all,
Some Collectd stop works in new version, instal en configura all, same config i user in before version and all works fine, Ex. temp, processor thermal and .....
1 Like
I've noticed LuCi gui hanging sometimes as I go through the menu. Anyone else having this issue?
Stopping, and going back to the previous page and then re-clicking the link gets it working.
1 Like
Yes, I have the same issues. E.g when I'm updating the package list in the software menu
This is on the 3200acm v2?
There's no v2 afaik?
No 1900ACS (shelby)