Thanks mate. Forgot google.. How did that happen :b
I've compare my samba config file to yours and everything's the same.
Still I get this error message
And if I type \192.168.1.1 in Windows explorer I get
This is so strange. My laptop can get in no problem but my desktop just wouldn't budge. I've compared both PCs' workgroup & sharing settings and adjusted desktop settings accordingly but still the same errors.
Grrrrrr I'm pulling my hair out.
Anywhere else I could check?
Thanks
Try setting this value to 1 (reboot needed):
HKLM\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters\AllowInsecureGuestAuth
If its not there create the value as a DWORD.
It might also be needed to enable SMB1 in Windows Features, hope this helps.
You may also compare this value on both machines you have.
Hey mate - I worked this out by test mapping network drive, and directly configured in windows 10 group policy window and it did resolve the problem! YAY! I'm literally typing up the solution right now in my original post for other's future reference.
Thank you so much!
Full journey here Mounting USB storage with existing files?
Post #4673 by joostieke in this thread is a pretty straight forward how-to. Follow the dev doc noted and use joostieke’s values and you should be good to go.
Hi guys its me again, just noticed I have Openwrt on both partitions now. I wanted to switch back to the original 32x firmware to test something but its gone. is there a code I can type to auto download and install via SSH from the current openwrt partition.
Currently both have openwrt but I use the one on Partiton 1 but would like to have the stock firmware on Partition 2. something like this
cd /tmp wget http://downloads.linksys.com/downloads/firmware/FW_WRT32X_1.0.180404.58.img sysupgrade -v -F /tmp/FW_WRT32X_1.0.180404.58.img
But i dont want to wipe both partitions and also this is from an old post. if someone could share a way I can auto download and install onto P2?
Thanks in advance
Ras
Using the command above will only wipe the alt partition not the one in use.
Although your going to need to use the Switched -F -n for flashing as the config from OpenWRT on that partition will not work with the stock firmware.
cd /tmp && wget http://downloads.linksys.com/downloads/firmware/FW_WRT32X_1.0.180404.58.img && sysupgrade -v -F -n FW_WRT32X_1.0.180404.58.img
Thanks, but it didnt work. It downloaded and installed but when booting up it doesn't have anything showing such as setup page or anything of such. just luck to be able to ssh into again and reboot into this partition again.
That statement may go to the developer. Has this worked before in previous builds?
Tons of examples of setting up dnscrypt-proxy 2 in this this thread. I never have the time, but would like to put something simple on the website for people to follow. Actually a 5 minute video illustrating how it works with the configurations needed would be best.
Not everyone follows this thread all the time, so I'll re-post the latest test build info.
This build is based on the new kernel - 5.4.41
https://dc502wrt.org/snapshots/r13244/targets/mvebu/cortexa9/
I'm interested in hearing back from 1900ac V1 owners.
A 5 minute video of setting up dnscrypt would be wonderful. Please post it on your website.
Thank you
Loaded on 1900ac v1 this afternoon. Nothing extra on my router in regards to services. So far no issues but I haven't read through the logs. Thank you for your work on getting the new kernel in.
Loaded on 1200ac yesterday, was good.
However, just had my LAN connected laptop stop responding mid-meeting with my boss..zzz
Any logs I can provide to check failure here?
On kernel log I see:
1445.149822] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
Nothing much on syslog.
If you need the automatic conntrack feature, you can put the following in rc.local (Startup - Local Startup):
echo 1 > /proc/sys/net/netfilter/nf_conntrack_helper
Hi all!
i noticed there is a problem with the WRT3200 5G wifi network.
I am tested latest stock, r12230 and r12394 fw and Xiaomi Router with latest stock fw
the results are good with the factory fw, but speed with openwrt is problematic.
Linksys WRT3200 latest stock fw
The factory and openwrt wifi settings were the same.
Which is the stable fw in which 5G wifi works properly?
Or what do I need to do to improve my speed?
To my knowledge the r12230 fw was still good for a wifi fw !?
Openwrt 5G wireless config:
config wifi-device 'radio0'
option type 'mac80211'
option hwmode '11a'
option path 'soc/soc:pcie/pci0000:00/0000:00:01.0/0000:01:00.0'
option country 'HU'
option txpower '23'
option htmode 'VHT80'
option channel '112'
config wifi-iface 'default_radio0'
option device 'radio0'
option network 'lan'
option mode 'ap'
option key 'blablabla'
option ssid 'Linksys5G'
option encryption 'psk2+ccmp'
thanks for help!
Br,
zacci
Some hardware and reverted to r12394 and performed a factory reset afterwards.
My LAN and WiFi speeds are way better than before the reset and latest firmware. However, WiFi is faster using my Archer C7 APs (with latest openWRT build) then with my WRT3200ACM.
I'll tweak a bit to see if I can improve the WiFi speed of my WRT3200ACM.
Hello iisquazar,
The linksys were a fresh installation. Xiaomi is several months old.
All,
Is there a version of Openwrt that is stable and achieves factory firmware performance?
br,
zacci
Hi David
I actually think a video is the wrong way to go on usability grounds, it's much easier to follow step by step instructions. I copied my own configuration down after you helped me a while ago, i've beefed this up and sent it to you s a PM, feel free to use if yo think it helps
All the best
I've just bought a WiFi range extender (netgear ex3700). Once I've installed openwrt, I'd be grateful of someone could point me to a tutorial on how to set this up?
Searching around seems to get me different instructions!
Well, there was no threat of me doing a video anyway 
You need time, the software, and the know how to edit videos. All of which I don't have right now.