This was a known issue and has already been fixed in latest snapshot ... that's the price to pay when your builds are based on "latest & greatest" 
Edit: for reference, https://github.com/openwrt/luci/commit/241b90c7f66dd08bca4ff89ea7cfe8aed9823bdd
1 Like
It wasn't a known issue when I first encountered this a few days ago. And you were the one who reported that.
For those who are too lazy to reflash:
/usr/lib/lua/luci/view/cbi/value.htm
Are you also experiencing an empty Memory section on the homepage (using Material theme)? I don't see any bug for that reported.
Today I upgraded my 1900ac V1 to the latest build 8466. The upgrade when smoothly, and except for the reported issue on the software tab things seems to be working ok. David, thanks for your fine efforts maintaining this build - it's certainly a build with all the goodies one needs.
I do however seem to be getting a lot of these kernel debug messages in the logs
Fri Nov 23 23:27:37 2018 kern.debug kernel: [36562.458766] ieee80211 phy0: Mac80211 start BA <MAC Address>
Fri Nov 3 23:27:37 2018 kern.debug kernel: [36562.865079] ieee80211 phy0: Stop BA <MAC Address>
The MAC addresses vary, but there are occasions whe there is a string of 'start' events for the same MAC address.
I know they are debug messages, so I'm wondering if they are anythig to be concerned about in terms of Wifi stability or functionality.
Actually I'm glad you brought the memory section up. I have the same problem with r8466, the Memory Section on the Status page is empty. I'm not quite adept enough to formally report a bug so I haven't done so.
Still struggling to find easy way to get Wireguard working for one antenna/radio and non-Wireguard traffic for another antenna/radio. 
I'm not even sure where to begin since there are not any guides or specifics for how to do this. Does anyone know how? Can we do this with the WRT3200ACM build?
Thank you.
An idea (but no promises if it'll work!):
-
Create a new interface (Network > Interface) and under "Physical settings" bind this interface to a specific interface: i.e. wifi radio wlan0 or wlan1
-
Set up the IP addressing so the range is different to other addresses - if your router gives out leases in the 192.168.1.x range, your new interface could give out in the 192.168.2.x range
-
Using the vpn-policy-routing package, set it so that requests from a certain IP range (e.g.. those in the 2.x range) are routed to the WG instance.
Caveat: No idea if this works but it's worth a try!
As luci-theme-material continues to have issues, I'm thinking about switching over to luci-theme-rosy because it is being actively maintained. If you haven't tried it, just uninstall material and install rosy.
1 Like
first time openwrt user, installed on wrt32x, basic usage (sqm qos, adblock) is very fine, material theme is indeed not working
thanks davidc502
I'll give that a shot as soon as I figure out how to do that.
luci-theme-rosy works well for me and has corrected some of the issues I have had with luci-theme-material. The only issue I still find, which may be independent of the theme, is that on the Status Overview page, the Memory section is still devoid of information.
Added an issue for Rosy -- Memory no values
Hi,
I got a second wrt3200 and I'd like to create a twin (identical) firmware version created from my working one.
Here's an example I found for a FULL backup image
It just backups the mtd partitions but I guess they are different for different hardwares.
Command cat /proc/mtd shows 10 mtd partitions on my router. Can anyone advice Which of them I could backup if not all of them?
I know this could seem overkill but since I'm not that expert I spend a crazy amount of time resetting the router every time I upgrade and I'd really, really like to sort this issue once ad for all.
Thanks for help.
Puppinoo.
I just went to r8466 and luci-app-statistics, specifically RDD, does not seem to be working when installed from the GUI via Software install.
How do I get it from the daily snapshots? Is it an IPK?
Thanks for any directions you can provide.
If luci-app-statistics is already installed, go to the /etc/config directory and look at the luci_statistics files.
How many of these files exist in /etc/config?
Example
root@lede:/etc/config# ls -l /etc/config/luci_statistics*
-rw-r--r-- 1 root root 3852 Nov 16 06:43 /etc/config/luci_statistics
-rw------- 1 root root 3642 Oct 11 20:13 /etc/config/luci_statistics.oldEssentially, you will need to remove luci_statistics and rename the file that luci-app-statistics tried to install but could not due to an existing file. Hope that makes sense.
Any thoughts regarding including kmod-wireguard in the build?
Good Afternoon,
After running 8466 for a few days now, I've had a couple of occurrences where the Wifi seems to drop out - the following is from the kernel log.
[152078.449002] device wlan1 left promiscuous mode
[152078.449150] br-lan: port 3(wlan1) entered disabled state
[152078.575053] ieee80211 phy1: change: 0x40
[152078.678762] ieee80211 phy1: change: 0x100
[152078.689552] device wlan0 left promiscuous mode
[152078.689777] br-lan: port 2(wlan0) entered disabled state
[152078.838917] ieee80211 phy0: change: 0x40
[152078.930838] ieee80211 phy0: change: 0x100
[152079.617160] ieee80211 phy1: change: 0xffffffff
[152079.729474] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[152079.735795] br-lan: port 2(wlan1) entered blocking state
[152079.735809] br-lan: port 2(wlan1) entered disabled state
[152079.736245] device wlan1 entered promiscuous mode
[152079.736409] br-lan: port 2(wlan1) entered blocking state
[152079.736428] br-lan: port 2(wlan1) entered listening state
[152079.739750] br-lan: port 2(wlan1) entered disabled state
[152079.740515] ieee80211 phy1: change: 0x100
[152079.748899] ieee80211 phy1: change: 0x40
[152079.866987] ieee80211 phy0: change: 0xffffffff
[152079.967618] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[152079.970192] br-lan: port 3(wlan0) entered blocking state
[152079.970205] br-lan: port 3(wlan0) entered disabled state
[152079.970550] device wlan0 entered promiscuous mode
[152079.970665] br-lan: port 3(wlan0) entered blocking state
[152079.970679] br-lan: port 3(wlan0) entered listening state
[152079.973902] ieee80211 phy1: change: 0x40
[152079.976398] ieee80211 phy0: change: 0x100
[152079.987665] ieee80211 phy0: change: 0x40
[152080.188807] ieee80211 phy0: change: 0x40
[152080.208787] ieee80211 phy1: change: 0x40
[152080.307811] ieee80211 phy1: change: 0x100
[152080.388783] ieee80211 phy0: change: 0x40
[152080.410534] ieee80211 phy1: change: 0x100
[152080.418795] ieee80211 phy1: change: 0x42
[152080.588829] ieee80211 phy0: change: 0x40
[152080.595895] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[152080.596088] br-lan: port 2(wlan1) entered blocking state
[152080.596102] br-lan: port 2(wlan1) entered listening state
[152080.753844] ------------[ cut here ]------------
[152080.754025] WARNING: CPU: 0 PID: 18698 at backports-4.19-rc5-1/net/mac80211/ieee80211_i.h:1416 sta_info_alloc+0x320/0x3fc [mac80211]
[152080.754038] Modules linked in: pppoe ppp_async pppox ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 iptable_nat ipt_REJECT ipt_MASQUERADE xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_policy xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda ts_fsm ts_bm slhc rfcomm nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_amanda nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp
[152080.754311] nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_irc nf_conntrack_h323 nf_conntrack_broadcast ts_kmp nf_conntrack_amanda iptable_raw iptable_mangle iptable_filter ipt_ah ipt_ECN ip_tables hidp hci_uart crc_ccitt btusb btmrvl_sdio btmrvl btintel bnep bluetooth fuse sch_cake em_nbyte cls_basic sch_prio sch_dsmark sch_pie sch_gred sch_teql act_ipt sch_multiq em_text em_meta sch_codel sch_sfq sch_fq act_police em_cmp sch_red act_connmark nf_conntrack act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_tbf sch_htb sch_hfsc sch_ingress hid evdev mwlwifi mac80211 cfg80211 compat cryptodev xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac
[152080.754583] ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables msdos bonding ifb sit tunnel4 ip_tunnel tun snd_compress snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_rawmidi snd_seq_device snd_hwdep snd input_core soundcore vfat fat ntfs nls_utf8 nls_iso8859_1 nls_cp437 ecdh_generic sha512_generic sha256_generic md5 kpp hmac ecb cmac authenc ohci_pci uhci_hcd ohci_platform ohci_hcd gpio_button_hotplug
[152080.754809] CPU: 0 PID: 18698 Comm: hostapd Not tainted 4.14.81 #0
[152080.754814] Hardware name: Marvell Armada 370/XP (Device Tree)
[152080.754851] [<c010f244>] (unwind_backtrace) from [<c010af48>] (show_stack+0x10/0x14)
[152080.754871] [<c010af48>] (show_stack) from [<c0626108>] (dump_stack+0x88/0x9c)
[152080.754890] [<c0626108>] (dump_stack) from [<c0121e00>] (__warn+0xe4/0x100)
[152080.754905] [<c0121e00>] (__warn) from [<c0121ecc>] (warn_slowpath_null+0x20/0x28)
[152080.755012] [<c0121ecc>] (warn_slowpath_null) from [<bf31d16c>] (sta_info_alloc+0x320/0x3fc [mac80211])
[152080.755253] [<bf31d16c>] (sta_info_alloc [mac80211]) from [<bf3344ac>] (ieee80211_add_station+0x80/0x120 [mac80211])
[152080.755451] [<bf3344ac>] (ieee80211_add_station [mac80211]) from [<bf2eb89c>] (nl80211_new_station+0x380/0x420 [cfg80211])
[152080.755542] [<bf2eb89c>] (nl80211_new_station [cfg80211]) from [<c055c590>] (genl_rcv_msg+0x2e8/0x388)
[152080.755557] [<c055c590>] (genl_rcv_msg) from [<c055b770>] (netlink_rcv_skb+0x8c/0xfc)
[152080.755571] [<c055b770>] (netlink_rcv_skb) from [<c055c298>] (genl_rcv+0x24/0x34)
[152080.755584] [<c055c298>] (genl_rcv) from [<c055af44>] (netlink_unicast+0x158/0x208)
[152080.755597] [<c055af44>] (netlink_unicast) from [<c055b3e8>] (netlink_sendmsg+0x334/0x37c)
[152080.755614] [<c055b3e8>] (netlink_sendmsg) from [<c050ab74>] (sock_sendmsg+0x14/0x24)
[152080.755629] [<c050ab74>] (sock_sendmsg) from [<c050b0a8>] (___sys_sendmsg+0x204/0x22c)
[152080.755645] [<c050b0a8>] (___sys_sendmsg) from [<c050bea8>] (__sys_sendmsg+0x40/0x64)
[152080.755663] [<c050bea8>] (__sys_sendmsg) from [<c0107860>] (ret_fast_syscall+0x0/0x54)
[152080.755681] ---[ end trace 2b89936d644dc34c ]---
[152080.759517] br-lan: port 3(wlan0) entered disabled state
[152080.788842] ieee80211 phy0: change: 0x40
[152080.865238] ------------[ cut here ]------------
[152080.865364] WARNING: CPU: 1 PID: 18698 at backports-4.19-rc5-1/net/mac80211/ieee80211_i.h:1416 sta_info_alloc+0x320/0x3fc [mac80211]
[152080.865368] Modules linked in: pppoe ppp_async pppox ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 iptable_nat ipt_REJECT ipt_MASQUERADE xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_policy xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda ts_fsm ts_bm slhc rfcomm nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_amanda nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp
[152080.865519] nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_irc nf_conntrack_h323 nf_conntrack_broadcast ts_kmp nf_conntrack_amanda iptable_raw iptable_mangle iptable_filter ipt_ah ipt_ECN ip_tables hidp hci_uart crc_ccitt btusb btmrvl_sdio btmrvl btintel bnep bluetooth fuse sch_cake em_nbyte cls_basic sch_prio sch_dsmark sch_pie sch_gred sch_teql act_ipt sch_multiq em_text em_meta sch_codel sch_sfq sch_fq act_police em_cmp sch_red act_connmark nf_conntrack act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_tbf sch_htb sch_hfsc sch_ingress hid evdev mwlwifi mac80211 cfg80211 compat cryptodev xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac
[152080.865669] ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables msdos bonding ifb sit tunnel4 ip_tunnel tun snd_compress snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_rawmidi snd_seq_device snd_hwdep snd input_core soundcore vfat fat ntfs nls_utf8 nls_iso8859_1 nls_cp437 ecdh_generic sha512_generic sha256_generic md5 kpp hmac ecb cmac authenc ohci_pci uhci_hcd ohci_platform ohci_hcd gpio_button_hotplug
[152080.865795] CPU: 1 PID: 18698 Comm: hostapd Tainted: G W 4.14.81 #0
[152080.865798] Hardware name: Marvell Armada 370/XP (Device Tree)
[152080.865823] [<c010f244>] (unwind_backtrace) from [<c010af48>] (show_stack+0x10/0x14)
[152080.865834] [<c010af48>] (show_stack) from [<c0626108>] (dump_stack+0x88/0x9c)
[152080.865846] [<c0626108>] (dump_stack) from [<c0121e00>] (__warn+0xe4/0x100)
[152080.865854] [<c0121e00>] (__warn) from [<c0121ecc>] (warn_slowpath_null+0x20/0x28)
[152080.865941] [<c0121ecc>] (warn_slowpath_null) from [<bf31d16c>] (sta_info_alloc+0x320/0x3fc [mac80211])
[152080.866123] [<bf31d16c>] (sta_info_alloc [mac80211]) from [<bf3344ac>] (ieee80211_add_station+0x80/0x120 [mac80211])
[152080.866274] [<bf3344ac>] (ieee80211_add_station [mac80211]) from [<bf2eb89c>] (nl80211_new_station+0x380/0x420 [cfg80211])
[152080.866333] [<bf2eb89c>] (nl80211_new_station [cfg80211]) from [<c055c590>] (genl_rcv_msg+0x2e8/0x388)
[152080.866342] [<c055c590>] (genl_rcv_msg) from [<c055b770>] (netlink_rcv_skb+0x8c/0xfc)
[152080.866349] [<c055b770>] (netlink_rcv_skb) from [<c055c298>] (genl_rcv+0x24/0x34)
[152080.866356] [<c055c298>] (genl_rcv) from [<c055af44>] (netlink_unicast+0x158/0x208)
[152080.866363] [<c055af44>] (netlink_unicast) from [<c055b3e8>] (netlink_sendmsg+0x334/0x37c)
[152080.866373] [<c055b3e8>] (netlink_sendmsg) from [<c050ab74>] (sock_sendmsg+0x14/0x24)
[152080.866381] [<c050ab74>] (sock_sendmsg) from [<c050b0a8>] (___sys_sendmsg+0x204/0x22c)
[152080.866389] [<c050b0a8>] (___sys_sendmsg) from [<c050bea8>] (__sys_sendmsg+0x40/0x64)
[152080.866401] [<c050bea8>] (__sys_sendmsg) from [<c0107860>] (ret_fast_syscall+0x0/0x54)
[152080.866405] ---[ end trace 2b89936d644dc34d ]---
[152080.978504] ------------[ cut here ]------------
[152080.978613] WARNING: CPU: 1 PID: 18698 at backports-4.19-rc5-1/net/mac80211/ieee80211_i.h:1416 sta_info_alloc+0x320/0x3fc [mac80211]
[152080.978617] Modules linked in: pppoe ppp_async pppox ppp_generic nf_nat_pptp nf_conntrack_pptp nf_conntrack_ipv6 iptable_nat ipt_REJECT ipt_MASQUERADE xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_policy xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda ts_fsm ts_bm slhc rfcomm nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_amanda nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp
[152080.978794] nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_irc nf_conntrack_h323 nf_conntrack_broadcast ts_kmp nf_conntrack_amanda iptable_raw iptable_mangle iptable_filter ipt_ah ipt_ECN ip_tables hidp hci_uart crc_ccitt btusb btmrvl_sdio btmrvl btintel bnep bluetooth fuse sch_cake em_nbyte cls_basic sch_prio sch_dsmark sch_pie sch_gred sch_teql act_ipt sch_multiq em_text em_meta sch_codel sch_sfq sch_fq act_police em_cmp sch_red act_connmark nf_conntrack act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_tbf sch_htb sch_hfsc sch_ingress hid evdev mwlwifi mac80211 cfg80211 compat cryptodev xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac
[152080.978968] ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables msdos bonding ifb sit tunnel4 ip_tunnel tun snd_compress snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_rawmidi snd_seq_device snd_hwdep snd input_core soundcore vfat fat ntfs nls_utf8 nls_iso8859_1 nls_cp437 ecdh_generic sha512_generic sha256_generic md5 kpp hmac ecb cmac authenc ohci_pci uhci_hcd ohci_platform ohci_hcd gpio_button_hotplug
[152080.979084] CPU: 1 PID: 18698 Comm: hostapd Tainted: G W 4.14.81 #0
[152080.979087] Hardware name: Marvell Armada 370/XP (Device Tree)
[152080.979106] [<c010f244>] (unwind_backtrace) from [<c010af48>] (show_stack+0x10/0x14)
[152080.979116] [<c010af48>] (show_stack) from [<c0626108>] (dump_stack+0x88/0x9c)
[152080.979126] [<c0626108>] (dump_stack) from [<c0121e00>] (__warn+0xe4/0x100)
[152080.979134] [<c0121e00>] (__warn) from [<c0121ecc>] (warn_slowpath_null+0x20/0x28)
[152080.979201] [<c0121ecc>] (warn_slowpath_null) from [<bf31d16c>] (sta_info_alloc+0x320/0x3fc [mac80211])
[152080.979337] [<bf31d16c>] (sta_info_alloc [mac80211]) from [<bf3344ac>] (ieee80211_add_station+0x80/0x120 [mac80211])
[152080.979457] [<bf3344ac>] (ieee80211_add_station [mac80211]) from [<bf2eb89c>] (nl80211_new_station+0x380/0x420 [cfg80211])
[152080.979520] [<bf2eb89c>] (nl80211_new_station [cfg80211]) from [<c055c590>] (genl_rcv_msg+0x2e8/0x388)
[152080.979543] [<c055c590>] (genl_rcv_msg) from [<c055b770>] (netlink_rcv_skb+0x8c/0xfc)
[152080.979560] [<c055b770>] (netlink_rcv_skb) from [<c055c298>] (genl_rcv+0x24/0x34)
[152080.979578] [<c055c298>] (genl_rcv) from [<c055af44>] (netlink_unicast+0x158/0x208)
[152080.979595] [<c055af44>] (netlink_unicast) from [<c055b3e8>] (netlink_sendmsg+0x334/0x37c)
[152080.979616] [<c055b3e8>] (netlink_sendmsg) from [<c050ab74>] (sock_sendmsg+0x14/0x24)
[152080.979635] [<c050ab74>] (sock_sendmsg) from [<c050b0a8>] (___sys_sendmsg+0x204/0x22c)
[152080.979653] [<c050b0a8>] (___sys_sendmsg) from [<c050bea8>] (__sys_sendmsg+0x40/0x64)
[152080.979676] [<c050bea8>] (__sys_sendmsg) from [<c0107860>] (ret_fast_syscall+0x0/0x54)
[152080.979690] ---[ end trace 2b89936d644dc34e ]---
[152080.998789] ieee80211 phy0: change: 0x40
[152081.198808] ieee80211 phy0: change: 0x40
[152081.398813] ieee80211 phy0: change: 0x40
[152081.598803] ieee80211 phy0: change: 0x40
[152081.798816] ieee80211 phy0: change: 0x40
[152081.998849] ieee80211 phy0: change: 0x40
[152082.198827] ieee80211 phy0: change: 0x40
[152082.398830] ieee80211 phy0: change: 0x40
[152082.598834] ieee80211 phy0: change: 0x40
[152082.628802] br-lan: port 2(wlan1) entered learning state
[152082.686988] ieee80211 phy0: change: 0x100
[152082.789498] ieee80211 phy0: change: 0x100
[152082.798538] ieee80211 phy0: change: 0x42
[152082.955960] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[152082.956137] br-lan: port 3(wlan0) entered blocking state
[152082.956150] br-lan: port 3(wlan0) entered listening state
[152084.698832] br-lan: port 2(wlan1) entered forwarding state
[152084.698839] br-lan: topology change detected, propagating
[152085.018834] br-lan: port 3(wlan0) entered learning state
[152087.108862] br-lan: port 3(wlan0) entered forwarding state
[152087.108869] br-lan: topology change detected, propagating
As you can see the recovers itself - but I'd be interested if anyone else is experiencing a similar issue, OR has any suggestions.
Regards
After I changed my router's lan address from 192.168.1.1 to 192.168.10.1 via editing /etc/config/network, the router is still somehow associated with 192.168.1.1. I can ssh to 192.168.1.1:22 and login luci at https://192.168.1.1/cgi-bin/luci. This messed up my routing because the upstream dhcp server(a fiber modem)'s lan address is also 192.168.1.1.Btw My static routing table is empty.
This problem is really frustrating. Does anyone know why this problem keeps happening and how to properly change router's lan address? Thanks.
I'm using the latest version of davidc502's firmware (2018-11-17 version) and my router is wrt3200acm
@NWindy5 -
i have this problem on a wrt32x using openwrt 18.06 .1 release too.
i found it more reliable if i changed the lan IP address AFTER i configured the wan adapters, bridges, dhcp, firewall, etc.
there is a previous couple of posts about how this might be a dnsmasq issue.
are you using a wrt32x or wrt3200?
i still suspect a subtle problem with the dual partittion workaroiund that openwrt has implemeented for the wrt32x.
i'd be curious about what you find.
overall, openwrt has been good for my wrt32x. i started with davidc502 builds. it is a fantastic build project.
thnak you david and all.
2 Likes
Tried latest build r8466 on my rango (3200acm)
but brief check shows that a very simple custom iptables rule does not work by some reason:
iptables --table nat --append prerouting_rule --destination 172.16.0.0/16 --protocol tcp --jump DNAT --to-destination 127.0.0.1:9040 -m comment --comment "viaLocalTor"
I have tor daemon running to transparently proxy few resources which is blocked.
I do not know for sure, but perhaps the issue with new lan and vpn helpers added into raw chain of iptables.
Have tried to cleanup this helpers, but it didn't help, DNAT rule still does not work.
status page in Luci shows that the rule is hitted by iptables.
Have to reboot to previous version where r7093 works just fine.
The Rosy theme memory issue has been fixed in trunk. I just reported another small issue with page formatting. A drop down box is obscured.