Client-IP & Request initiator

[neurotransmitter]

Hi folk,

I'm sure I missed the part in the manual ;-)...
but still two questions:

Setup: Fritzbox in front, openwrt (23.05) behind as a bridge

1. how can I manually change the client IP addresses that are connected to the openwrt on the openwrt? DHCP is activated and each client is assigned an IP address at random - I would like to put each client in an IP range? (same procedure as in Fritzbox?)
2. what do I have to set so that I can see which client (DNS name) of the openwrt has made which request (www.XYZ.com) on the Fritzbox when I go out to the Internet?
   Currently I only see that the openwrt makes the requests and not the client xy behind it.

Thank you very much.

[frollic]

@neurotransmitter

I would like to put each client in an IP range? (same procedure as in Fritzbox?

static leases ?

http://IP/cgi-bin/luci/admin/network/dhcp

@neurotransmitter

what do I have to set so that I can see which client (DNS name) of the openwrt has made which request

you can't, as long as your openwrt device is configured as a router, and not as dumb AP.

[neurotransmitter]

Thx frollic