Hello everybody,
I installed Chrony, and disabled -> etc/init.d/sysntpd disable
if I do a chronyc sources ->
lede ~ » chronyc sources 127 ↵
210 Number of sources = 12
MS Name/IP address Stratum Poll Reach LastRx Last sample
===============================================================================
^? ntp0.rrze.uni-erlangen.de 0 8 0 - +0ns[ +0ns] +/- 0ns
^? ntp1.rrze.uni-erlangen.de 0 8 0 - +0ns[ +0ns] +/- 0ns
^? ntp2.rrze.uni-erlangen.de 0 8 0 - +0ns[ +0ns] +/- 0ns
^? ntp3.rrze.uni-erlangen.de 0 8 0 - +0ns[ +0ns] +/- 0ns
I get this strane result, it looks like Chrony "sees" the servers I choosed, but its not syncing, does anyone have experience with Chrony, or can tell me what Im doing wrong?
My /etc/chrony/chrony.conf contains this:
# This file is included from config file generated from /etc/config/chrony
# Log clock errors above 0.5 seconds
logchange 0.5
# Don't log client accesses
noclientlog
# set the system clock else the kernel will always stay in UNSYNC state
rtcsync
server ntp0.fau.de iburst
server ntp1.fau.de iburst
server ntp2.fau.de iburst
server ntp3.fau.de iburst
# Allow NTP client access from local network.
allow 192.168.99.0/24 # <- LocalLan Range for it acts as timeserver
stratumweight 0
driftfile /var/lib/chrony/drift
makestep 1000 10
logdir /var/log/chrony
local stratum 10
maxdistance 16.0
Thanks for reading, maybe someone has a Tip, Thank you!
