Cannot install iwlwifi for AX200

[frollic]

Cannot satisfy dependencies / kernel is not compatible

I think only 2.4GHz AP mode is supported on the AX200.

Trouble getting ad-hoc to work on a Raspberry Pi CM4 board with an Intel(R) Wi-Fi 6 AX200 adapter

I am having trouble getting ad-hoc to work on a Raspberry Pi CM4 board with an Intel(R) Wi-Fi 6 AX200 adapter. I built openwrt-22.03.0-rc5 and added/enabled these packages: pciutils kmod-iwlwifi luci wpa-cli iwlwifi-firmware-ax200 iwlwifi-firmware-ax210 which enabled me to successfully configure client mode and connect to a Nighthawk AX12 WiFi 6 Router in the 5GHz band (AX mode). As great as that was, I am more interested in getting ad-hoc (5GHz AX mode) working. iwlwifi messages from the sys…

Set up AX210 step by step

Neither the 5 GHz band, nor the 6 GHz band (on the ax210) will support AP mode - only the 2.4 GHz band and only in a very limited fashion (one VAP, not officially supported/ tested by Intel - here are dragons). The situation is identical for ax200 and ax210 (with the obvious naming difference for the firmware package and their corresponding technical specs).