I have a question/problem, maybe some can help me. I want to us my tp-link tl-wr810n-v2 with openwrt as accespoint for traveling and flashed openwrt 18.06.4. I want to connect the device via lan and/or via wlan with local networks (in hotels, apartments and so on). I connected to the tp-link via …

I would re-flash the router. Your description sounds similar to others' issues - solved by a re-flash of the router.

I'd recommend that your uplink (i.e. the hotel/apartment/cafe wifi) is a WWAN (wireless WAN), not a wireless LAN. To do this, you should change your LAN IP/network to something that is uncommon and fairly unlikely to conflict (for example, maybe 10.24.134.0/24). Use TravelMate to manage your wireles…

Thanks for your quick reply! Maybe I am a not so much into it. Do you know a how-to for noobs to set openwrt up the way you recommend it? This would be really cool.

[image] openwrt-noob: Do you know a how-to for noobs to set openwrt up the way you recommend it? [image] psherman: Use TravelMate [image] Travelmate support thread Community Builds, Projects & Packages Hi, in the OpenWrt stable & snapshot package repo you'll…

Thanks for your reply. After a reset of the router, I installed travelmate. I set everything up, added a wlan, removed the ethernet cables and everything worked fine. But after unplugging the router and plugging it in again, nothing worked. I could connect trough wlan, but there was no internet-co…

[image] openwrt-noob: But after unplugging the router and plugging it in again, nothing worked. Unplugging power; or Ethernet? What did they say in the Travelmate thread?

Unplugging power! Unplugging Ethernet was no problem and worked well.

[image] openwrt-noob: Unplugging power! So...are the configs missing? Then, what steps do you perform to restore the connection?

Maybe I cannot reconnect to the router. I have to hard reset (with a hardware button) and start from scratch again.

[image] openwrt-noob: I cannot reconnect to the router. I have to hard reset (with a hardware button) and start from scratch again. :open_mouth: Wow...OK... [image] openwrt-noob: If I than disconnect the lan cable and connect via wlan, i cannot access the LUCI-interface. But I have a in…