Can i install openwrt on router TENDA RX2 PRO?

For Developers
1

Hello everyone, I have a cheap router of the Tenda brand, model RX2 Pro, it is an economical wifi router 6, I would like to know if I could flash in any way Open Wrt I'm new to this, I recently opened the computer and can take some pictures, I don't know if they will be of much help, I would like to know if the hardware of this router with Open WRT is compatible, And if it is how could you create or modify a fireware for this computer! Greetings from Ecuador

1000002331
10000023311920×2560 579 KB

1000002333
10000023331920×2560 533 KB

1000002332
10000023321920×2560 441 KB

1000002335
10000023351920×1440 463 KB

1000002334
10000023341920×1440 288 KB

Agradecería mucho que alguien pueda ayudarme!

2

This device is not supported by OpenWrt, so no, there is no way to install the firmware at this time.

You certainly could begin the process of attempting to add support, though:
https://openwrt.org/docs/guide-developer/add.new.device

3

The antenna wires solder points speaks volumes.

1 Like
4

16MB flash
Realtek 5ghz wifi chip under removed shield
Realtek switch chip

You see 4 solder points one square - that is serial port, voltage not writeen, you have to measure on operating device first.

The real thing is under ribbed heatsinks/rf shields.

Additional info: https://www.tendacn.com/download/detail-4500.html (encrypted firmware, boot messages via serial may give some idea of SoC)

5

right? I already got rid of that equipment, now I have two mr7350, which also have no official support, but inventing I found an unofficial firmware that works well, and there is a resoposttorio https://github.com/bkspc/backspacewrt/tree/new_main

1 Like