BT Home Hub 5 A Vodafone VDSL2 Italia / Italy 8b 12a 17a 35b Retransmission (ITU-T G.998.4) Vectoring ( ITU-T G.993.5) SRA (ITU-T G.993.2)

I don't see much difference for now, other than downloading with 60 Mbit/s from 160, maybe could be enough, for my use but actually i also have an other router so yeah, i could try this too.

I can try it

I had an 7530 and i was reaching circa 170 Mbit/s at 300/400 meters, could be also possible that 170 was limited by the offer that was saying 160 Mbit/s if i remember good.

Well, the 7530 is capable of Super Vectoring and reaches (at least with the profile 35b used here in Germany) up to 260 MBit/s.
But you didn't answered takimata's question:
What's the speed your DSL modem syncs with?
Please quote the lines "Line Mode", "Data Rate" and "Max. Attainable Data Rate" from your DSL status.
And yes, OpenWRT 22.03.0 is (at least on my side) much slower regarding DSL download speed (not sync speed, they're the same on both versions) than 21.02.3. On my HH5A it's approx. 110 Mbit/s with 21.02.3 and 75 Mbit/s on 22.03. With some additional tweaks i can push it up to 85-90 MBits/s, which is still slower.

Line Mode: G.993.2 (VDSL2, Profile 17a) (with the 7530 was on 35b)
Data Rate: 92.445 Mb/s / 21.600 Mb/s
Max. Attainable Data Rate (ATTNDR): 91.932 Mb/s / 32.417 Mb/s

Can you guess also why i can't login on this modem with VPN on? Seems i have same settings of another modem where i can login into.

For this instead was thinking to open another thread but at this stalling point where i think i will buy another 7530 i'll ask there, there is an application for sheudeling the reboot of only one network (modem) ? I saw just cron messages but i am a little worried to set them. I tried watchcat but cron is easier than modify confs

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.