Hi @daniel the attendedsysupgrade error is still persistent in Luci. Any help with that ?
Try now it has work for me today 
Do you mean there is a way to save the original firmware in the stock interface?
Cheers.
What's been improved in Wave 2?
Chers.
that's not really what i meant, i just made a backup of the original software in .cfg
but I noticed that maybe thanks to luci attented sysupgrade,
last night by wanting to configure several netword in / etc / config / I lost the interface of the router I reset it behind with the small button and it was repaired with the packages like openvpn upnp etc, which to me reassured;)
just i have make now a sqm test for bufferbloat on fiber optic just on upload is just amazing
settings cake and piece of cake with ethernet overhead 44 cake only on upload
2 Likes
ARMv8 is such a big improvement for SQM users that don't want to go with a x86_64 setup.
2 Likes
- Refer to https://openwrt.org/faq/cannot_satisfy_dependencies
- Remove duplicate src declarations from
/etc/opkg/distfeeds.confand/etc/opkg/customfeeds.conf - Adjust the single remaining
openwrt_kmodsentry to match the installed kernel version.
Next time, rather than taking a photo, please copy the text of the error message and post it as preformatted text. This would make your post easier to read and allow quoting from it.
2 Likes
First guess is that you have a master snapshot that is more than a week old, and the default gcc version in master has been upgraded from 8.4 to 10.x, so the libgcc etc. have changed, so most of the installable packages have been compiled with a different version than your firmware.
Youi might need to sysupgrade to the current snapshot firmware version, which has been compiled with the same libraries as the installable packages.
Ps.
And this has nothing to do with RT3200/E8450 specifically...
1 Like
It's definitely "thanks to sysupgrade".
Attended sysupgrade generates a whole firmware image with the selected tools (e.g. UPnP, OpenVPN) baked in, which persist after a reset. This is one of the reasons why I've been asking aparcar to add a way to inject custom network configs/defaults, so that one could safely tinker with their router, and if the worst happens, a factory reset brings back all the working settings.
2 Likes
Whats the update command for auc sysupgrade under ssh?
hello, anyone has a config for wireless because between my box and openwt the values is not a same unfortunatly thanks
example : wifi of my box http://www.dslreports.com/speedtest/69314774
wifi of openwrt 2.4 http://www.dslreports.com/speedtest/69314786
root@OpenWrt:~# cat /etc/config/wireless
config wifi-device 'radio0'
option type 'mac80211'
option path 'platform/18000000.wmac'
option band '2g'
option htmode 'HT20'
option channel 'auto'
option cell_density '0'
config wifi-iface 'default_radio0'
option device 'radio0'
option network 'lan'
option mode 'ap'
option ssid 'XXXXX'
option encryption 'psk2'
option key 'password'
option wps_pushbutton '1'
config wifi-device 'radio1'
option type 'mac80211'
option path '1a143000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0'
option band '5g'
option htmode 'HE80'
option channel 'auto'
option cell_density '0'
config wifi-iface 'default_radio1'
option device 'radio1'
option network 'lan'
option mode 'ap'
option encryption 'psk2'
option wps_pushbutton '1'
option ssid 'XXXXX'
option key 'password'
ok is good now country to default and chanell auto resolve the problem for my part
1 Like
I'm getting a crash trying to start batman over adhoc on the 5 GHz radio. (using adhoc for compatibility with ath10k devices running ct firmware). The crash occurs immediately during bootup. pstore dump is attached below.
Using today's snapshot r17399-6393ea1581.
config wifi-device 'radio1'
option type 'mac80211'
option country 'US'
option path '1a143000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0'
option channel '36'
option band '5g'
option htmode 'HT40'
config wifi-iface
option device 'radio1'
option network 'nwi_mesh0'
option mode 'adhoc'
option bssid '02:bc:01:cd:b3:27'
option ssid '<redacted>'
option encryption 'sae'
option key '<redacted>'
option ieee80211w '2'
root@OpenWrt:/sys/fs/pstore# cat dmesg-ramoops-0
Oops#1 Part1
<6>[ 8.207796] Loading modules backported from Linux version v5.10.42-0-g65859eca4dff
<6>[ 8.215384] Backport generated by backports.git v5.10.42-1-0-gbee5c545
<6>[ 8.242246] xt_time: kernel timezone is -0000
<7>[ 8.308252] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<7>[ 8.319169] mt7915e 0000:01:00.0: assign IRQ: got 144
<7>[ 8.324272] pci 0000:00:00.0: enabling bus mastering
<6>[ 8.329301] mt7915e 0000:01:00.0: enabling device (0000 -> 0002)
<7>[ 8.335421] mt7915e 0000:01:00.0: enabling bus mastering
<6>[ 8.419333] mt7915e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20201105222230a
<6>[ 8.419333]
<6>[ 8.448404] mt7622-wmac 18000000.wmac: HW/SW Version: 0x8a108a10, Build Time: 20190801210006a
<6>[ 8.448404]
<6>[ 8.563603] mt7622-wmac 18000000.wmac: N9 Firmware Version: 2.0, Build Time: 20200131180931
<6>[ 8.631521] mt7915e 0000:01:00.0: WM Firmware Version: ____000000, Build Time: 20201105222304
<6>[ 8.690776] mt7915e 0000:01:00.0: WA Firmware Version: DEV_000000, Build Time: 20201105222323
<6>[ 8.820978] PPP generic driver version 2.4.2
<6>[ 8.827188] NET: Registered protocol family 24
<6>[ 8.871479] batman_adv: B.A.T.M.A.N. advanced 2021.2-openwrt-1 (compatibility version 15) loaded
<14>[ 8.886600] kmodloader: done loading kernel modules from /etc/modules.d/*
<6>[ 11.070938] mtk_soc_eth 1b100000.ethernet eth0: Link is Down
<6>[ 11.080370] mtk_soc_eth 1b100000.ethernet eth0: configuring for fixed/2500base-x link mode
<6>[ 11.088918] mtk_soc_eth 1b100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
<6>[ 11.097627] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>[ 11.106108] mt7530 mdio-bus:00 lan1: configuring for phy/gmii link mode
<6>[ 11.116353] 8021q: adding VLAN 0 to HW filter on device lan1
<6>[ 11.124718] br-eth: port 1(lan1) entered blocking state
<6>[ 11.130149] br-eth: port 1(lan1) entered disabled state
<6>[ 11.136434] device lan1 entered promiscuous mode
<6>[ 11.141059] device eth0 entered promiscuous mode
<6>[ 11.174518] mt7530 mdio-bus:00 lan2: configuring for phy/gmii link mode
<6>[ 11.188352] 8021q: adding VLAN 0 to HW filter on device lan2
<6>[ 11.202453] br-eth: port 2(lan2) entered blocking state
<6>[ 11.207745] br-eth: port 2(lan2) entered disabled state
<6>[ 11.217505] device lan2 entered promiscuous mode
<6>[ 11.234724] mt7530 mdio-bus:00 lan3: configuring for phy/gmii link mode
<6>[ 11.242562] 8021q: adding VLAN 0 to HW filter on device lan3
<6>[ 11.252487] br-eth: port 3(lan3) entered blocking state
<6>[ 11.257811] br-eth: port 3(lan3) entered disabled state
<6>[ 11.265715] device lan3 entered promiscuous mode
<6>[ 11.281137] mt7530 mdio-bus:00 lan4: configuring for phy/gmii link mode
<6>[ 11.288678] 8021q: adding VLAN 0 to HW filter on device lan4
<6>[ 11.296755] br-eth: port 4(lan4) entered blocking state
<6>[ 11.301984] br-eth: port 4(lan4) entered disabled state
<6>[ 11.312940] device lan4 entered promiscuous mode
<6>[ 11.329944] mt7530 mdio-bus:00 wan: configuring for phy/gmii link mode
<6>[ 11.337076] 8021q: adding VLAN 0 to HW filter on device wan
<6>[ 11.341391] mt7530 mdio-bus:00 wan: Link is Up - 1Gbps/Full - flow control rx/tx
<6>[ 11.347500] br-eth: port 5(wan) entered blocking state
<6>[ 11.355183] br-eth: port 5(wan) entered disabled state
<6>[ 11.361378] device wan entered promiscuous mode
<6>[ 11.373585] br-eth: port 5(wan) entered blocking state
<6>[ 11.378769] br-eth: port 5(wan) entered forwarding state
<6>[ 11.384870] IPv6: ADDRCONF(NETDEV_CHANGE): br-eth: link becomes ready
<6>[ 11.394512] IPv6: ADDRCONF(NETDEV_CHANGE): br-eth.1: link becomes ready
<6>[ 11.401458] IPv6: ADDRCONF(NETDEV_CHANGE): br-eth.2: link becomes ready
<6>[ 11.408298] IPv6: ADDRCONF(NETDEV_CHANGE): br-eth.29: link becomes ready
<6>[ 11.578716] 8021q: adding VLAN 0 to HW filter on device bat0
<6>[ 11.589047] br-mtest: port 1(bat0.1) entered blocking state
<6>[ 11.594645] br-mtest: port 1(bat0.1) entered disabled state
<6>[ 11.600436] device bat0.1 entered promiscuous mode
<6>[ 11.605274] device bat0 entered promiscuous mode
<6>[ 11.611360] br-mtest: port 1(bat0.1) entered blocking state
<6>[ 11.616998] br-mtest: port 1(bat0.1) entered forwarding state
<6>[ 14.289707] mt7530 mdio-bus:00 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
<6>[ 14.508520] br-eth: port 1(lan1) entered blocking state
<6>[ 14.513753] br-eth: port 1(lan1) entered forwarding state
<6>[ 14.522830] br-eth: port 6(wlan1-1) entered blocking state
<6>[ 14.528352] br-eth: port 6(wlan1-1) entered disabled state
<6>[ 14.534035] device wlan1-1 entered promiscuous mode
<6>[ 14.808652] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-1: link becomes ready
<6>[ 14.815348] br-eth: port 6(wlan1-1) entered blocking state
<6>[ 14.820833] br-eth: port 6(wlan1-1) entered forwarding state
<1>[ 15.998216] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
<1>[ 16.007058] Mem abort info:
<1>[ 16.009849] ESR = 0x96000005
<1>[ 16.012895] EC = 0x25: DABT (current EL), IL = 32 bits
<1>[ 16.018236] SET = 0, FnV = 0
<1>[ 16.021283] EA = 0, S1PTW = 0
<1>[ 16.024421] Data abort info:
<1>[ 16.027313] ISV = 0, ISS = 0x00000005
<1>[ 16.031196] CM = 0, WnR = 0
<1>[ 16.034158] user pgtable: 4k pages, 39-bit VAs, pgdp=00000000429c3000
<1>[ 16.040604] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
<0>[ 16.049351] Internal error: Oops: 96000005 [#1] SMP
<7>[ 16.054219] Modules linked in: xt_connlimit pppoe ppp_async nf_conncount iptable_nat batman_adv xt_state xt_nat xt_helper xt_conntrack xt_connmark xt_connbytes xt_REDIRECT xt_MASQUERADE xt_FLOWOFFLOAD xt_CT pppox ppp_generic nf_nat nf_flow_table nf_conntrack mt7915e mt7615e mt7615_common mt76_connac_lib mt76 mac80211 ipt_REJECT cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_recent xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_comment xt_TCPMSS xt_LOG xt_HL xt_DSCP xt_CLASSIFY slhc sch_cake nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables hwmon crc_ccitt compat sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred act_gact nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ifb tun seqiv leds_gpio xhci_plat_hcd gpio_button_hotplug
<7>[ 16.140165] CPU: 0 PID: 1651 Comm: wpa_supplicant Tainted: G S 5.10.60 #0
<7>[ 16.148244] Hardware name: Linksys E8450 (UBI) (DT)
<7>[ 16.153113] pstate: 20000005 (nzCv daif -PAN -UAO -TCO BTYPE=--)
<7>[ 16.159123] pc : mt7915_mac_sta_remove+0x768/0xe20 [mt7915e]
<7>[ 16.164775] lr : mt7915_mcu_add_bss_info+0x11c/0x610 [mt7915e]
<7>[ 16.170596] sp : ffffffc01188b9d0
<7>[ 16.173901] x29: ffffffc01188b9d0 x28: 0000000000000001
<7>[ 16.179206] x27: 0000000000000000 x26: ffffff8002baf440
<7>[ 16.184510] x25: 0000000000000000 x24: 000000000000011e
<7>[ 16.189814] x23: ffffff800284d8f0 x22: ffffff800229d778
<7>[ 16.195118] x21: ffffff800284d610 x20: ffffff8002baf448
<7>[ 16.200422] x19: ffffff80028b5900 x18: 0000000000000000
<7>[ 16.205726] x17: 0000000000000000 x16: 0000000000000000
<7>[ 16.211029] x15: 0000000000000000 x14: 0000000000000000
<7>[ 16.216333] x13: 0000000000000330 x12: 0000000000000040
<7>[ 16.221637] x11: 000002ff3353bba0 x10: 0000000000000820
<7>[ 16.226942] x9 : 000000000000003c x8 : ffffff800229dad0
<7>[ 16.232246] x7 : ffffff800229a93c x6 : ffffff800229a924
<7>[ 16.237550] x5 : 0000000000000002 x4 : 0000000000000001
<7>[ 16.242854] x3 : 0000000000000001 x2 : 0000000000000001
<7>[ 16.248158] x1 : 0000000000000000 x0 : 0000000000000011
<7>[ 16.253463] Call trace:
<7>[ 16.255904] mt7915_mac_sta_remove+0x768/0xe20 [mt7915e]
<7>[ 16.261208] mt7915_eeprom_get_power_delta+0xfe4/0x1894 [mt7915e]
<7>[ 16.267313] drv_remove_interface+0x28/0x80 [mac80211]
<7>[ 16.272452] ieee80211_adjust_monitor_flags+0x640/0x950 [mac80211]
<7>[ 16.278633] ieee80211_adjust_monitor_flags+0x944/0x950 [mac80211]
<7>[ 16.284808] __dev_close_many+0x9c/0x100
<7>[ 16.288723] __dev_change_flags+0x98/0x190
<7>[ 16.292810] dev_change_flags+0x20/0x60
<7>[ 16.296638] devinet_ioctl+0x62c/0x6c0
<7>[ 16.300377] inet_ioctl+0x1bc/0x230
<7>[ 16.303859] sock_do_ioctl+0x44/0x1e4
<7>[ 16.307513] sock_ioctl+0x26c/0x4c0
<7>[ 16.310996] __arm64_sys_ioctl+0xac/0xd0
<7>[ 16.314911] el0_svc_common.constprop.0+0x60/0x110
<7>[ 16.319692] do_el0_svc+0x18/0x20
<7>[ 16.323001] el0_svc+0x10/0x1c
<7>[ 16.326046] el0_sync_handler+0xa8/0xac
<7>[ 16.329873] el0_sync+0x148/0x180
<0>[ 16.333182] Code: 394008c3 52800220 394000e4 7100007f (39400023)
<4>[ 16.339266] ---[ end trace b1dd6a04a2898ed5 ]---
root@OpenWrt:/sys/fs/pstore# cat dmesg-ramoops-1
Panic#2 Part1
<7>[ 8.319169] mt7915e 0000:01:00.0: assign IRQ: got 144
<7>[ 8.324272] pci 0000:00:00.0: enabling bus mastering
<6>[ 8.329301] mt7915e 0000:01:00.0: enabling device (0000 -> 0002)
<7>[ 8.335421] mt7915e 0000:01:00.0: enabling bus mastering
<6>[ 8.419333] mt7915e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20201105222230a
<6>[ 8.419333]
<6>[ 8.448404] mt7622-wmac 18000000.wmac: HW/SW Version: 0x8a108a10, Build Time: 20190801210006a
<6>[ 8.448404]
<6>[ 8.563603] mt7622-wmac 18000000.wmac: N9 Firmware Version: 2.0, Build Time: 20200131180931
<6>[ 8.631521] mt7915e 0000:01:00.0: WM Firmware Version: ____000000, Build Time: 20201105222304
<6>[ 8.690776] mt7915e 0000:01:00.0: WA Firmware Version: DEV_000000, Build Time: 20201105222323
<6>[ 8.820978] PPP generic driver version 2.4.2
<6>[ 8.827188] NET: Registered protocol family 24
<6>[ 8.871479] batman_adv: B.A.T.M.A.N. advanced 2021.2-openwrt-1 (compatibility version 15) loaded
<14>[ 8.886600] kmodloader: done loading kernel modules from /etc/modules.d/*
<6>[ 11.070938] mtk_soc_eth 1b100000.ethernet eth0: Link is Down
<6>[ 11.080370] mtk_soc_eth 1b100000.ethernet eth0: configuring for fixed/2500base-x link mode
<6>[ 11.088918] mtk_soc_eth 1b100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
<6>[ 11.097627] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>[ 11.106108] mt7530 mdio-bus:00 lan1: configuring for phy/gmii link mode
<6>[ 11.116353] 8021q: adding VLAN 0 to HW filter on device lan1
<6>[ 11.124718] br-eth: port 1(lan1) entered blocking state
<6>[ 11.130149] br-eth: port 1(lan1) entered disabled state
<6>[ 11.136434] device lan1 entered promiscuous mode
<6>[ 11.141059] device eth0 entered promiscuous mode
<6>[ 11.174518] mt7530 mdio-bus:00 lan2: configuring for phy/gmii link mode
<6>[ 11.188352] 8021q: adding VLAN 0 to HW filter on device lan2
<6>[ 11.202453] br-eth: port 2(lan2) entered blocking state
<6>[ 11.207745] br-eth: port 2(lan2) entered disabled state
<6>[ 11.217505] device lan2 entered promiscuous mode
<6>[ 11.234724] mt7530 mdio-bus:00 lan3: configuring for phy/gmii link mode
<6>[ 11.242562] 8021q: adding VLAN 0 to HW filter on device lan3
<6>[ 11.252487] br-eth: port 3(lan3) entered blocking state
<6>[ 11.257811] br-eth: port 3(lan3) entered disabled state
<6>[ 11.265715] device lan3 entered promiscuous mode
<6>[ 11.281137] mt7530 mdio-bus:00 lan4: configuring for phy/gmii link mode
<6>[ 11.288678] 8021q: adding VLAN 0 to HW filter on device lan4
<6>[ 11.296755] br-eth: port 4(lan4) entered blocking state
<6>[ 11.301984] br-eth: port 4(lan4) entered disabled state
<6>[ 11.312940] device lan4 entered promiscuous mode
<6>[ 11.329944] mt7530 mdio-bus:00 wan: configuring for phy/gmii link mode
<6>[ 11.337076] 8021q: adding VLAN 0 to HW filter on device wan
<6>[ 11.341391] mt7530 mdio-bus:00 wan: Link is Up - 1Gbps/Full - flow control rx/tx
<6>[ 11.347500] br-eth: port 5(wan) entered blocking state
<6>[ 11.355183] br-eth: port 5(wan) entered disabled state
<6>[ 11.361378] device wan entered promiscuous mode
<6>[ 11.373585] br-eth: port 5(wan) entered blocking state
<6>[ 11.378769] br-eth: port 5(wan) entered forwarding state
<6>[ 11.384870] IPv6: ADDRCONF(NETDEV_CHANGE): br-eth: link becomes ready
<6>[ 11.394512] IPv6: ADDRCONF(NETDEV_CHANGE): br-eth.1: link becomes ready
<6>[ 11.401458] IPv6: ADDRCONF(NETDEV_CHANGE): br-eth.2: link becomes ready
<6>[ 11.408298] IPv6: ADDRCONF(NETDEV_CHANGE): br-eth.29: link becomes ready
<6>[ 11.578716] 8021q: adding VLAN 0 to HW filter on device bat0
<6>[ 11.589047] br-mtest: port 1(bat0.1) entered blocking state
<6>[ 11.594645] br-mtest: port 1(bat0.1) entered disabled state
<6>[ 11.600436] device bat0.1 entered promiscuous mode
<6>[ 11.605274] device bat0 entered promiscuous mode
<6>[ 11.611360] br-mtest: port 1(bat0.1) entered blocking state
<6>[ 11.616998] br-mtest: port 1(bat0.1) entered forwarding state
<6>[ 14.289707] mt7530 mdio-bus:00 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
<6>[ 14.508520] br-eth: port 1(lan1) entered blocking state
<6>[ 14.513753] br-eth: port 1(lan1) entered forwarding state
<6>[ 14.522830] br-eth: port 6(wlan1-1) entered blocking state
<6>[ 14.528352] br-eth: port 6(wlan1-1) entered disabled state
<6>[ 14.534035] device wlan1-1 entered promiscuous mode
<6>[ 14.808652] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-1: link becomes ready
<6>[ 14.815348] br-eth: port 6(wlan1-1) entered blocking state
<6>[ 14.820833] br-eth: port 6(wlan1-1) entered forwarding state
<1>[ 15.998216] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
<1>[ 16.007058] Mem abort info:
<1>[ 16.009849] ESR = 0x96000005
<1>[ 16.012895] EC = 0x25: DABT (current EL), IL = 32 bits
<1>[ 16.018236] SET = 0, FnV = 0
<1>[ 16.021283] EA = 0, S1PTW = 0
<1>[ 16.024421] Data abort info:
<1>[ 16.027313] ISV = 0, ISS = 0x00000005
<1>[ 16.031196] CM = 0, WnR = 0
<1>[ 16.034158] user pgtable: 4k pages, 39-bit VAs, pgdp=00000000429c3000
<1>[ 16.040604] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
<0>[ 16.049351] Internal error: Oops: 96000005 [#1] SMP
<7>[ 16.054219] Modules linked in: xt_connlimit pppoe ppp_async nf_conncount iptable_nat batman_adv xt_state xt_nat xt_helper xt_conntrack xt_connmark xt_connbytes xt_REDIRECT xt_MASQUERADE xt_FLOWOFFLOAD xt_CT pppox ppp_generic nf_nat nf_flow_table nf_conntrack mt7915e mt7615e mt7615_common mt76_connac_lib mt76 mac80211 ipt_REJECT cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_recent xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_comment xt_TCPMSS xt_LOG xt_HL xt_DSCP xt_CLASSIFY slhc sch_cake nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables hwmon crc_ccitt compat sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred act_gact nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 ifb tun seqiv leds_gpio xhci_plat_hcd gpio_button_hotplug
<7>[ 16.140165] CPU: 0 PID: 1651 Comm: wpa_supplicant Tainted: G S 5.10.60 #0
<7>[ 16.148244] Hardware name: Linksys E8450 (UBI) (DT)
<7>[ 16.153113] pstate: 20000005 (nzCv daif -PAN -UAO -TCO BTYPE=--)
<7>[ 16.159123] pc : mt7915_mac_sta_remove+0x768/0xe20 [mt7915e]
<7>[ 16.164775] lr : mt7915_mcu_add_bss_info+0x11c/0x610 [mt7915e]
<7>[ 16.170596] sp : ffffffc01188b9d0
<7>[ 16.173901] x29: ffffffc01188b9d0 x28: 0000000000000001
<7>[ 16.179206] x27: 0000000000000000 x26: ffffff8002baf440
<7>[ 16.184510] x25: 0000000000000000 x24: 000000000000011e
<7>[ 16.189814] x23: ffffff800284d8f0 x22: ffffff800229d778
<7>[ 16.195118] x21: ffffff800284d610 x20: ffffff8002baf448
<7>[ 16.200422] x19: ffffff80028b5900 x18: 0000000000000000
<7>[ 16.205726] x17: 0000000000000000 x16: 0000000000000000
<7>[ 16.211029] x15: 0000000000000000 x14: 0000000000000000
<7>[ 16.216333] x13: 0000000000000330 x12: 0000000000000040
<7>[ 16.221637] x11: 000002ff3353bba0 x10: 0000000000000820
<7>[ 16.226942] x9 : 000000000000003c x8 : ffffff800229dad0
<7>[ 16.232246] x7 : ffffff800229a93c x6 : ffffff800229a924
<7>[ 16.237550] x5 : 0000000000000002 x4 : 0000000000000001
<7>[ 16.242854] x3 : 0000000000000001 x2 : 0000000000000001
<7>[ 16.248158] x1 : 0000000000000000 x0 : 0000000000000011
<7>[ 16.253463] Call trace:
<7>[ 16.255904] mt7915_mac_sta_remove+0x768/0xe20 [mt7915e]
<7>[ 16.261208] mt7915_eeprom_get_power_delta+0xfe4/0x1894 [mt7915e]
<7>[ 16.267313] drv_remove_interface+0x28/0x80 [mac80211]
<7>[ 16.272452] ieee80211_adjust_monitor_flags+0x640/0x950 [mac80211]
<7>[ 16.278633] ieee80211_adjust_monitor_flags+0x944/0x950 [mac80211]
<7>[ 16.284808] __dev_close_many+0x9c/0x100
<7>[ 16.288723] __dev_change_flags+0x98/0x190
<7>[ 16.292810] dev_change_flags+0x20/0x60
<7>[ 16.296638] devinet_ioctl+0x62c/0x6c0
<7>[ 16.300377] inet_ioctl+0x1bc/0x230
<7>[ 16.303859] sock_do_ioctl+0x44/0x1e4
<7>[ 16.307513] sock_ioctl+0x26c/0x4c0
<7>[ 16.310996] __arm64_sys_ioctl+0xac/0xd0
<7>[ 16.314911] el0_svc_common.constprop.0+0x60/0x110
<7>[ 16.319692] do_el0_svc+0x18/0x20
<7>[ 16.323001] el0_svc+0x10/0x1c
<7>[ 16.326046] el0_sync_handler+0xa8/0xac
<7>[ 16.329873] el0_sync+0x148/0x180
<0>[ 16.333182] Code: 394008c3 52800220 394000e4 7100007f (39400023)
<4>[ 16.339266] ---[ end trace b1dd6a04a2898ed5 ]---
<0>[ 16.350035] Kernel panic - not syncing: Oops: Fatal exception
<2>[ 16.355778] SMP: stopping secondary CPUs
<0>[ 16.359694] Kernel Offset: disabled
<0>[ 16.363175] CPU features: 0x0000002,04002004
<0>[ 16.367434] Memory Limit: none
root@OpenWrt:/sys/fs/pstore# @mk24 Please report your finding on https://github.com/openwrt/mt76/issues
The pstore logs you provided are probably useful for developers @nbd or @ryderlee1110 and others who might not be reading this thread.
That would require editing the source code and rebuild?
I'm having hard time with my E8450 running snapshot (OpenWrt SNAPSHOT r17342-98bccdafd7 / LuCI Master git-21.223.61040-6045f58). After working for a day or two it boots into recovery and then it stays there unless I power cycle the device. I tried updating the snapshot to the latest one using Attended Sysupgrade but I keep getting below message.
I tried adding the log files to here but it has more than 32000 characters which is the forum limit. How should I upload the logs here?
Any suggestions?
Bob
Please dump the pstore content once the device reboots into recovery. In SSH console do
cat /sys/fs/pstore/*
If the log happens to be too long, only post the end of it showing the actual Kernel crash.
1 Like
Sure, I will wait for this to happen next time and get the requested details. Is there issue with attended system upgrade server? I am still getting the above error from any broswer and even from multiple PCs.