Hi everyone.
I tried already 2 different builds of the snapshot on the Xiaomi AX3600.
There's no way to make the wifi on the atk11 working.
The driver crashes.
Here's the dmesg.
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.15.98 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.2.0 r22247-fb06f533b3) 12.2.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Tue Mar 7 21:31:36 2023
[ 0.000000] Machine model: Xiaomi AX3600
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000040ffffff]
[ 0.000000] node 0: [mem 0x0000000041000000-0x000000004a3fffff]
[ 0.000000] node 0: [mem 0x000000004a400000-0x000000004a4fffff]
[ 0.000000] node 0: [mem 0x000000004a500000-0x000000004a5fffff]
[ 0.000000] node 0: [mem 0x000000004a600000-0x000000004e8fffff]
[ 0.000000] node 0: [mem 0x000000004e900000-0x000000005fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] psci: OSI mode supported.
[ 0.000000] percpu: Embedded 17 pages/cpu s30808 r8192 d30632 u69632
[ 0.000000] pcpu-alloc: s30808 r8192 d30632 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024
[ 0.000000] Kernel command line: ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait uart_en=1 root=/dev/ubiblock0_0
[ 0.000000] Unknown kernel command line parameters "uart_en=1", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 415348K/524288K available (7808K kernel code, 860K rwdata, 2136K rodata, 1280K init, 288K bss, 108940K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479]
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000120] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000137] pid_max: default: 32768 minimum: 301
[ 0.000289] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.000305] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.001970] rcu: Hierarchical SRCU implementation.
[ 0.002145] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[ 0.002695] smp: Bringing up secondary CPUs ...
[ 0.003318] Detected VIPT I-cache on CPU1
[ 0.003384] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.004016] Detected VIPT I-cache on CPU2
[ 0.004056] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.004648] Detected VIPT I-cache on CPU3
[ 0.004686] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.004752] smp: Brought up 1 node, 4 CPUs
[ 0.004777] SMP: Total of 4 processors activated.
[ 0.004785] CPU features: detected: 32-bit EL0 Support
[ 0.004792] CPU features: detected: CRC32 instructions
[ 0.004841] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.004851] CPU: All CPU(s) started at EL1
[ 0.004873] alternatives: patching kernel code
[ 0.012611] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.012649] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.012817] pinctrl core: initialized pinctrl subsystem
[ 0.014102] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.014576] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.014620] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.014657] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.015000] thermal_sys: Registered thermal governor 'step_wise'
[ 0.016382] cpuidle: using governor menu
[ 0.016614] ASID allocator initialised with 65536 entries
[ 0.069449] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[ 0.078249] SCSI subsystem initialized
[ 0.078429] usbcore: registered new interface driver usbfs
[ 0.078476] usbcore: registered new interface driver hub
[ 0.078511] usbcore: registered new device driver usb
[ 0.078741] CPUidle PSCI: failed to enable OSI mode: -95
[ 0.079039] qcom_scm: convention: smc arm 64
[ 0.080447] clocksource: Switched to clocksource arch_sys_counter
[ 0.081236] NET: Registered PF_INET protocol family
[ 0.081370] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.082023] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.082048] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.082062] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.082113] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.082194] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.082275] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.082302] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.082462] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.082495] PCI: CLS 0 bytes, default 64
[ 0.083577] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[ 0.087345] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.087364] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.088125] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.090269] qcom-qmp-phy 84000.phy: Registered Qcom-QMP phy
[ 0.092483] qcom-pcie 20000000.pci: host bridge /soc/pci@20000000 ranges:
[ 0.092545] qcom-pcie 20000000.pci: IO 0x0020200000..0x002020ffff -> 0x0020200000
[ 0.092574] qcom-pcie 20000000.pci: MEM 0x0020220000..0x002fffffff -> 0x0020220000
[ 0.221993] qcom-pcie 20000000.pci: iATU unroll: enabled
[ 0.222011] qcom-pcie 20000000.pci: Detected iATU regions: 8 outbound, 8 inbound
[ 0.322076] qcom-pcie 20000000.pci: Link up
[ 0.322228] qcom-pcie 20000000.pci: PCI host bridge to bus 0000:00
[ 0.322242] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.322261] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] (bus address [0x20200000-0x2020ffff])
[ 0.322274] pci_bus 0000:00: root bus resource [mem 0x20220000-0x2fffffff]
[ 0.322319] pci 0000:00:00.0: [17cb:1002] type 01 class 0x060400
[ 0.322346] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.322430] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.325637] pci 0000:01:00.0: [168c:0050] type 00 class 0x028000
[ 0.325785] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.326004] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.326464] pci 0000:01:00.0: supports D1
[ 0.326475] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[ 0.329519] pci 0000:00:00.0: BAR 8: assigned [mem 0x20300000-0x205fffff]
[ 0.329541] pci 0000:00:00.0: BAR 9: assigned [mem 0x20600000-0x207fffff 64bit pref]
[ 0.329556] pci 0000:00:00.0: BAR 0: assigned [mem 0x20220000-0x20220fff]
[ 0.329571] pci 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 0.329588] pci 0000:01:00.0: BAR 0: assigned [mem 0x20400000-0x205fffff 64bit]
[ 0.329659] pci 0000:01:00.0: BAR 6: assigned [mem 0x20300000-0x2030ffff pref]
[ 0.329673] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.329685] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff]
[ 0.329698] pci 0000:00:00.0: bridge window [mem 0x20300000-0x205fffff]
[ 0.329711] pci 0000:00:00.0: bridge window [mem 0x20600000-0x207fffff 64bit pref]
[ 0.331648] pcieport 0000:00:00.0: PME: Signaling with IRQ 82
[ 0.331953] pcieport 0000:00:00.0: AER: enabled with IRQ 82
[ 0.335256] bam-dma-engine 704000.dma-controller: num-channels unspecified in dt
[ 0.335280] bam-dma-engine 704000.dma-controller: num-ees unspecified in dt
[ 0.339058] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.340701] msm_serial 78b3000.serial: msm_serial: detected port #0
[ 0.340752] msm_serial 78b3000.serial: uartclk = 3686400
[ 0.340811] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 22, base_baud = 230400) is a MSM
[ 0.340850] msm_serial: console setup on port #0
[ 1.163247] printk: console [ttyMSM0] enabled
[ 1.168394] msm_serial: driver initialized
[ 1.176464] loop: module loaded
[ 1.176541] Loading iSCSI transport class v2.0-870.
[ 1.181165] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xaa
[ 1.184065] nand: ESMT GD9FS2G8F2A
[ 1.190699] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
[ 1.194165] 13 fixed-partitions partitions found on MTD device qcom_nand.0
[ 1.201467] OF: Bad cell count for /soc/nand-controller@79b0000/nand@0/partitions
[ 1.208390] OF: Bad cell count for /soc/nand-controller@79b0000/nand@0/partitions
[ 1.216575] Creating 13 MTD partitions on "qcom_nand.0":
[ 1.223424] 0x000000000000-0x000000100000 : "0:sbl1"
[ 1.230034] 0x000000100000-0x000000200000 : "0:mibib"
[ 1.234964] 0x000000200000-0x000000500000 : "0:qsee"
[ 1.241393] 0x000000500000-0x000000580000 : "0:devcfg"
[ 1.244475] 0x000000580000-0x000000600000 : "0:rpm"
[ 1.249427] 0x000000600000-0x000000680000 : "0:cdt"
[ 1.254264] 0x000000680000-0x000000700000 : "0:appsblenv"
[ 1.259065] 0x000000700000-0x000000800000 : "0:appsbl"
[ 1.265035] 0x000000800000-0x000000880000 : "0:art"
[ 1.269699] 0x000000880000-0x000000900000 : "bdata"
[ 1.274450] 0x000000900000-0x000000a00000 : "pstore"
[ 1.279688] 0x000000a00000-0x000002dc0000 : "ubi_kernel"
[ 1.311618] 0x000002dc0000-0x000010000000 : "rootfs"
[ 1.473626] mtd: setting mtd12 (rootfs) as root device
[ 1.473919] mtdsplit: no squashfs found in "rootfs"
[ 1.482146] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
[ 1.485414] s1: supplied by regulator-dummy
[ 1.488511] s2: supplied by regulator-dummy
[ 1.492505] vdd_s3: supplied by regulator-dummy
[ 1.496783] vdd_s4: supplied by regulator-dummy
[ 1.501347] s5: supplied by regulator-dummy
[ 1.505673] l1: supplied by regulator-dummy
[ 1.509843] l2: supplied by regulator-dummy
[ 1.514046] l3: supplied by regulator-dummy
[ 1.518173] l4: supplied by regulator-dummy
[ 1.522360] l5: supplied by regulator-dummy
[ 1.526528] l6: supplied by regulator-dummy
[ 1.530694] l7: supplied by regulator-dummy
[ 1.534847] l8: supplied by regulator-dummy
[ 1.539037] l9: supplied by regulator-dummy
[ 1.543307] l11: supplied by regulator-dummy
[ 1.547355] l12: supplied by regulator-dummy
[ 1.551895] l13: supplied by regulator-dummy
[ 1.569324] i2c_dev: i2c /dev entries driver
[ 1.573354] sdhci: Secure Digital Host Controller Interface driver
[ 1.573401] sdhci: Copyright(c) Pierre Ossman
[ 1.578656] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.586524] remoteproc remoteproc0: releasing cd00000.q6v5_wcss
[ 1.590974] NET: Registered PF_INET6 protocol family
[ 1.595388] Segment Routing with IPv6
[ 1.599698] In-situ OAM (IOAM) with IPv6
[ 1.603297] NET: Registered PF_PACKET protocol family
[ 1.607258] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.612192] 8021q: 802.1Q VLAN Support v1.8
[ 1.641388] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[ 1.641707] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
[ 1.647514] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1
[ 1.654156] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
[ 1.661785] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
[ 1.669286] cpr3_mem_acc_init: apc: not using memory accelerator regulator
[ 1.678427] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 704000 uV
[ 1.685376] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 832000 uV
[ 1.695358] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 888000 uV
[ 1.705166] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 968000 uV
[ 1.715028] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 714, quot_offset[ 7]= 0
[ 1.724788] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 959, quot_offset[ 7]= 245
[ 1.735638] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1052, quot_offset[ 7]= 90
[ 1.746575] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1198, quot_offset[ 7]= 145
[ 1.757647] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
[ 1.759887] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 19200 KHz, changing to: 1017600 KHz[ 1.776315] remoteproc remoteproc0: cd00000.q6v5_wcss is available
[ 1.786361] ubi0: attaching mtd12
[ 2.400448] random: crng init done
[ 2.726886] ubi0: scanning is finished
[ 2.733784] ubi0: attached mtd12 (name "rootfs", size 210 MiB)
[ 2.733824] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.738517] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.745406] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.752242] ubi0: good PEBs: 1682, bad PEBs: 0, corrupted PEBs: 0
[ 2.759003] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 2.765261] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1498686636
[ 2.772383] ubi0: available PEBs: 0, total reserved PEBs: 1682, PEBs reserved for bad PEB handling: 40
[ 2.781685] ubi0: background thread "ubi_bgt0d" started, PID 459
[ 2.782540] block ubiblock0_0: created from ubi0:0(rootfs)
[ 2.800572] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 2.801230] Freeing unused kernel memory: 1280K
[ 2.870554] Run /sbin/init as init process
[ 2.870575] with arguments:
[ 2.870578] /sbin/init
[ 2.870581] with environment:
[ 2.870584] HOME=/
[ 2.870586] TERM=linux
[ 2.870589] uart_en=1
[ 3.049277] init: Console is alive
[ 3.049417] init: - watchdog -
[ 3.627904] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.781066] ssdk_switch_device_num_init[1335]:INFO:ess-switch dts node number: 1
[ 3.781191] ssdk_dt_get_switch_node[1124]:INFO:ess-switch DT exist!
[ 3.787545] ssdk_dt_parse_access_mode[999]:INFO:switch_access_mode: local bus
[ 3.793544] ssdk_dt_parse_access_mode[1012]:INFO:switchreg_base_addr: 0x3a000000
[ 3.800829] ssdk_dt_parse_access_mode[1013]:INFO:switchreg_size: 0x1000000
[ 3.808288] ssdk_dt_parse_mac_mode[327]:INFO:mac mode = 0x0
[ 3.814975] ssdk_dt_parse_mac_mode[336]:INFO:mac mode1 = 0xff
[ 3.820444] ssdk_dt_parse_mac_mode[345]:INFO:mac mode2 = 0xff
[ 3.826399] ssdk_dt_parse_uniphy[364]:INFO:ess-uniphy DT exist!
[ 3.832569] ssdk_dt_parse_intf_mac[942]:INFO:dp2 MAC 28:d1:27:fc:44:ae
[ 3.837858] ssdk_dt_parse_intf_mac[942]:INFO:dp3 MAC 9c:9d:7e:75:57:88
[ 3.844469] ssdk_dt_parse_intf_mac[942]:INFO:dp4 MAC 9c:9d:7e:75:57:88
[ 3.850973] ssdk_dt_parse_intf_mac[942]:INFO:dp5 MAC 9c:9d:7e:75:57:88
[ 3.857479] ssdk_plat_init[1692]:INFO:ssdk_plat_init start
[ 3.982316] ssdk_gcc_clock_init[1275]:INFO:SSDK gcc clock init successfully!
[ 3.983611] malibu_phy_api_ops_init[2846]:INFO:qca probe malibu phy driver succeeded!
[ 3.988586] hsl_phy_phydev_get[773]:ERROR:phy_addr 0 phydev is NULL
[ 4.002160] regi_init[3953]:INFO:Initializing HPPE!!
[ 4.240448] ssdk_ppe_reset_init[1535]:INFO:ppe reset successfully!
[ 4.244046] qca_hppe_portctrl_hw_init[126]:INFO:Hawkeye PPE port initializing
[ 4.245571] hsl_phy_phydev_get[773]:ERROR:phy_addr 0 phydev is NULL
[ 4.252864] hsl_phy_phydev_get[773]:ERROR:phy_addr 0 phydev is NULL
[ 4.486568] adpt_hppe_port_mux_mac_type_set[2787]:WARN:port 6 need not to configure mux and mac type
[ 4.486633] ssdk_switch_register[2017]:INFO:Chip version 0x1500
[ 4.494779] qca_link_polling_select[1487]:INFO:link-polling-required node does not exist
[ 4.500402] ssdk_switch_register[2043]:INFO:polling is selected
[ 4.508748] regi_init[3957]:INFO:Initializing HPPE Done!!
[ 4.514463] ssdk_genl_init[211]:INFO:ssdk genl family register success.
[ 4.519937] regi_init[4020]:INFO:qca-ssdk module init succeeded!
[ 4.528854] EDMA ver 1 hw init
[ 4.532844] EDMA HW Reset completed succesfully
[ 4.535497] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)
[ 4.539893] RxDesc:1 (15-15) RxFill:1 (7-7)
[ 4.545708] Generic PHY 90000.mdio-1:01: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:01, irq=POLL)
[ 4.549910] nss-dp 3a001200.dp2 wan: Registered netdev wan(qcom-id:2)
[ 4.559392] Generic PHY 90000.mdio-1:02: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:02, irq=POLL)
[ 4.566077] nss-dp 3a001400.dp3 lan1: Registered netdev lan1(qcom-id:3)
[ 4.575362] Generic PHY 90000.mdio-1:03: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:03, irq=POLL)
[ 4.582023] nss-dp 3a001600.dp4 lan2: Registered netdev lan2(qcom-id:4)
[ 4.591501] Generic PHY 90000.mdio-1:04: attached PHY driver (mii_bus:phy_addr=90000.mdio-1:04, irq=POLL)
[ 4.598152] nss-dp 3a001800.dp5 lan3: Registered netdev lan3(qcom-id:5)
[ 4.607483] **********************************************************
[ 4.613694] * NSS Data Plane driver
[ 4.620271] **********************************************************
[ 4.631858] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 4.633207] init: - preinit -
[ 7.110150] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 7.110279] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 634
[ 7.144508] UBIFS (ubi0:1): recovery needed
[ 7.231862] UBIFS (ubi0:1): recovery completed
[ 7.231984] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 7.235204] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 7.243125] UBIFS (ubi0:1): FS size: 199479296 bytes (190 MiB, 1571 LEBs), max 1583 LEBs, journal size 10031104 bytes (9 MiB, 79 LEBs)
[ 7.253017] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 7.264984] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 55C4C41A-BE5A-4D03-A402-D611ED1A3A05, small LPT model
[ 7.275653] mount_root: switching to ubifs overlay
[ 7.287437] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[ 7.291614] urandom-seed: Seeding with /etc/urandom.seed
[ 7.352937] procd: - early -
[ 7.353044] procd: - watchdog -
[ 7.899504] procd: - watchdog -
[ 7.901310] procd: - ubus -
[ 7.955427] procd: - init -
[ 8.160085] urngd: v1.0.2 started.
[ 8.176379] kmodloader: loading kernel modules from /etc/modules.d/*
[ 8.216105] Loading modules backported from Linux version v6.1-rc8-0-g76dcd734eca2
[ 8.216147] Backport generated by backports.git v5.15.81-1-41-g02e352527db5
[ 8.229898] NET: Registered PF_QIPCRTR protocol family
[ 8.263137] PPP generic driver version 2.4.2
[ 8.263989] NET: Registered PF_PPPOX protocol family
[ 8.267992] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 8.271469] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 8.287784] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x50.
[ 8.289166] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 8.297072] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 9.070593] ath10k_pci 0000:01:00.0: qca9887 hw1.0 target 0x4100016d chip_id 0x004000ff sub 0000:0000
[ 9.070651] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 9.078957] ath10k_pci 0000:01:00.0: firmware ver 10.1-ct-87-__fW-022-ecad3248 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 61a92df5
[ 9.114254] ath10k_pci 0000:01:00.0: Loading BDF type 0
[ 9.134416] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 b4ce36fa
[ 10.001069] ath10k_pci 0000:01:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
[ 10.007611] ath10k_pci 0000:01:00.0: wmi print 'P 128 V 8 T 410'
[ 10.007659] ath10k_pci 0000:01:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
[ 10.013847] ath10k_pci 0000:01:00.0: wmi print 'alloc rem: 25560 iram: 24780'
[ 10.057872] ath10k_pci 0000:01:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal nvmem max-sta 128 raw 0 hwcrypto 1
[ 10.058232] ath10k_pci 0000:01:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
[ 10.171592] ath: EEPROM regdomain: 0x0
[ 10.171602] ath: EEPROM indicates default country code should be used
[ 10.171605] ath: doing EEPROM country->regdmn map search
[ 10.171610] ath: country maps to regdmn code: 0x3a
[ 10.171614] ath: Country alpha2 being used: US
[ 10.171618] ath: Regpair used: 0x3a
[ 10.182577] ath11k c000000.wifi: ipq8074 hw2.0
[ 10.182615] ath11k c000000.wifi: FW memory mode: 1
[ 10.186232] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
[ 10.190906] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
[ 11.378768] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up
[ 11.380106] ath11k c000000.wifi: qmi ignore invalid mem req type 3
[ 11.385814] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
[ 11.391279] ath11k c000000.wifi: fw_version 0x250a04a5 fw_build_timestamp 2021-12-20 07:09 fw_build_id WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
[ 11.402764] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 13.724267] br-lan: port 1(lan1) entered blocking state
[ 13.724315] br-lan: port 1(lan1) entered disabled state
[ 13.728557] device lan1 entered promiscuous mode
[ 13.742598] br-lan: port 2(lan2) entered blocking state
[ 13.742651] br-lan: port 2(lan2) entered disabled state
[ 13.746902] device lan2 entered promiscuous mode
[ 13.755562] br-lan: port 3(lan3) entered blocking state
[ 13.756717] br-lan: port 3(lan3) entered disabled state
[ 13.762029] device lan3 entered promiscuous mode
[ 13.772444] nss-dp 3a001200.dp2 wan: PHY Link up speed: 1000
[ 14.177376] ath: EEPROM regdomain: 0x8210
[ 14.177431] ath: EEPROM indicates we should expect a country code
[ 14.177467] ath11k c000000.wifi: No regulatory rules available in the event info
[ 14.180392] ath: doing EEPROM country->regdmn map search
[ 14.180396] ath: country maps to regdmn code: 0x37
[ 14.180399] ath: Country alpha2 being used: NL
[ 14.180403] ath: Regpair used: 0x37
[ 14.180405] ath: regdomain 0x8210 dynamically updated by user
[ 14.186502] ath11k c000000.wifi: failed to extract regulatory info from received event
[ 14.186549] ------------[ cut here ]------------
[ 14.225351] WARNING: CPU: 0 PID: 2498 at ath11k_hal_rx_sw_mon_ring_buf_paddr_get+0x3194/0x49f0 [ath11k]
[ 14.230136] Modules linked in: pppoe ppp_async nft_fib_inet nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_table_inet ath11k_ahb ath11k ath10k_pci ath10k_core ath wireguard pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_counter nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mac80211 libchacha20poly1305 chacha_neon cfg80211 slhc qrtr_smd qrtr qmi_helpers poly1305_neon ns nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 libcurve25519_generic libcrc32c libchacha hwmon crc_ccitt compat ip6_udp_tunnel udp_tunnel seqiv jitterentropy_rng drbg michael_mic kpp hmac cmac leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom qca_nss_dp qca_ssdk gpio_button_hotplug crc32c_generic
[ 14.295827] CPU: 0 PID: 2498 Comm: iw Not tainted 5.15.98 #0
[ 14.318060] Hardware name: Xiaomi AX3600 (DT)
[ 14.323874] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 14.328131] pc : ath11k_hal_rx_sw_mon_ring_buf_paddr_get+0x3194/0x49f0 [ath11k]
[ 14.334903] lr : ath11k_hal_rx_sw_mon_ring_buf_paddr_get+0x3194/0x49f0 [ath11k]
[ 14.342195] sp : ffffffc008003c20
[ 14.349478] x29: ffffffc008003c20 x28: 0000000000000044 x27: ffffffc008be6810
[ 14.352957] x26: 000000000000004c x25: 000000000000000a x24: 0000000000000000
[ 14.360075] x23: 0000000000000000 x22: ffffff8003e0c000 x21: ffffff8005b7ed00
[ 14.367193] x20: ffffff8004520000 x19: ffffff8003e02600 x18: fffffffffffe5df8
[ 14.374312] x17: 20746e6576652065 x16: 6874206e6920656c x15: fffffffffffe5e50
[ 14.381430] x14: 0000000000000001 x13: 0a746e6576652064 x12: 6576696563657220
[ 14.388548] x11: 6d6f7266206f666e x10: 692079726f74616c x9 : 666e692079726f74
[ 14.395666] x8 : 616c756765722074 x7 : ffffffc008b81c98 x6 : 0000000000000001
[ 14.402783] x5 : ffffff801fe966e0 x4 : 0000000000000000 x3 : 0000000000000000
[ 14.409901] x2 : 0000000000000000 x1 : ffffff800281de00 x0 : 000000000000004a
[ 14.417021] Call trace:
[ 14.424130] ath11k_hal_rx_sw_mon_ring_buf_paddr_get+0x3194/0x49f0 [ath11k]
[ 14.426395] ath11k_htc_rx_completion_handler+0x464/0x610 [ath11k]
[ 14.433337] ath11k_ce_per_engine_service+0x2e0/0x3f0 [ath11k]
[ 14.439586] 0xffffffc000b8fc74
[ 14.445397] tasklet_action_common.constprop.0+0x144/0x180
[ 14.448440] tasklet_action+0x28/0x34
[ 14.453992] _stext+0x10c/0x28c
[ 14.457723] irq_exit+0xbc/0x100
[ 14.460675] handle_domain_irq+0x64/0x90
[ 14.464150] gic_handle_irq+0x74/0xa0
[ 14.468055] call_on_irq_stack+0x28/0x54
[ 14.471615] do_interrupt_handler+0x54/0x60
[ 14.475607] el0_interrupt+0x74/0xc0
[ 14.479512] __el0_irq_handler_common+0x18/0x24
[ 14.483334] el0t_64_irq_handler+0x10/0x1c
[ 14.487586] el0t_64_irq+0x184/0x188
[ 14.491753] ---[ end trace b56c3b484bbeec0f ]---
[ 14.496968] ath11k c000000.wifi: No regulatory rules available in the event info
[ 14.500115] ath11k c000000.wifi: failed to extract regulatory info from received event
[ 14.507535] ------------[ cut here ]------------
[ 14.515192] WARNING: CPU: 0 PID: 0 at ath11k_hal_rx_sw_mon_ring_buf_paddr_get+0x3194/0x49f0 [ath11k]
[ 14.519976] Modules linked in: pppoe ppp_async nft_fib_inet nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_table_inet ath11k_ahb ath11k ath10k_pci ath10k_core ath wireguard pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_counter nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mac80211 libchacha20poly1305 chacha_neon cfg80211 slhc qrtr_smd qrtr qmi_helpers poly1305_neon ns nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 libcurve25519_generic libcrc32c libchacha hwmon crc_ccitt compat ip6_udp_tunnel udp_tunnel seqiv jitterentropy_rng drbg michael_mic kpp hmac cmac leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom qca_nss_dp qca_ssdk gpio_button_hotplug crc32c_generic
[ 14.585408] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.15.98 #0
[ 14.607646] Hardware name: Xiaomi AX3600 (DT)
[ 14.615192] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 14.619450] pc : ath11k_hal_rx_sw_mon_ring_buf_paddr_get+0x3194/0x49f0 [ath11k]
[ 14.626222] lr : ath11k_hal_rx_sw_mon_ring_buf_paddr_get+0x3194/0x49f0 [ath11k]
[ 14.633512] sp : ffffffc008003c20
[ 14.640796] x29: ffffffc008003c20 x28: 0000000000000044 x27: ffffffc008be6810
[ 14.644277] x26: 0000000000000018 x25: 000000000000000d x24: 0000000000000000
[ 14.651395] x23: 0000000000000000 x22: ffffff8003e0c000 x21: ffffff8005b7eb80
[ 14.658513] x20: ffffff8004520000 x19: ffffff8003e02700 x18: ffffffc008b27bc8
[ 14.665630] x17: 65636572206d6f72 x16: 66206f666e692079 x15: 0000000000000492
[ 14.672749] x14: 0000000000000186 x13: ffffffc008003818 x12: ffffffc008b7fbc8
[ 14.679866] x11: 0000000000000004 x10: ffffffc008b7fbc8 x9 : 0000000000000000
[ 14.686986] x8 : ffffffc008b27b78 x7 : ffffffc008b27bc8 x6 : 0000000000000001
[ 14.694104] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[ 14.701220] x2 : 0000000000000000 x1 : ffffffc008b1e100 x0 : 000000000000004a
[ 14.708340] Call trace:
[ 14.715450] ath11k_hal_rx_sw_mon_ring_buf_paddr_get+0x3194/0x49f0 [ath11k]
[ 14.717714] ath11k_htc_rx_completion_handler+0x464/0x610 [ath11k]
[ 14.724657] ath11k_ce_per_engine_service+0x2e0/0x3f0 [ath11k]
[ 14.730906] 0xffffffc000b8fc74
[ 14.736716] tasklet_action_common.constprop.0+0x144/0x180
[ 14.739759] tasklet_action+0x28/0x34
[ 14.745313] _stext+0x10c/0x28c
[ 14.749044] irq_exit+0xbc/0x100
[ 14.751996] handle_domain_irq+0x64/0x90
[ 14.755470] gic_handle_irq+0x74/0xa0
[ 14.759376] call_on_irq_stack+0x28/0x54
[ 14.762935] do_interrupt_handler+0x54/0x60
[ 14.766928] el1_interrupt+0x30/0x50
[ 14.770832] el1h_64_irq_handler+0x18/0x24
[ 14.774652] el1h_64_irq+0x78/0x7c
[ 14.778557] arch_cpu_idle+0x18/0x2c
[ 14.781943] default_idle_call+0x20/0x70
[ 14.785677] do_idle+0x214/0x240
[ 14.789581] cpu_startup_entry+0x28/0x60
[ 14.790487] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
[ 14.792794] rest_init+0xc8/0xe0
[ 14.802690] arch_call_rest_init+0x10/0x1c
[ 14.806076] start_kernel+0x6a8/0x6cc
[ 14.809981] __primary_switched+0xa0/0xa8
Any idea?
Thanks