So I've took this afternoon for openwrt instalation on fritzbox 7412 . After ramboot I cannot proceed to flash installation as I've allways getting "1" in below command: root@OpenWrt:~# opkg install /tmp/fritz-tffs-nand_1_mips_24kc.ipk Installing fritz-tffs-nand (1) to root... root@OpenWrt:~# fritz…

100% working . That NEED to be included in 7412 TOH .Anyone ? also mind that It can be done 100% windows using tcmd passive ftp to 192.168.178.1. and commands: quote SETENV linux_fs_start 0 quote SETENV memsize 0x07BA0000 quote SETENV kernel_args_tmp mtdram1=0x87BA0000,0x88000000 quote MEDIA SD…

AVM FRITZ!Box 7412 stuck in ramboot

Installing and Using OpenWrt

frollic February 12, 2021, 9:30am 2

you could try

Problem with installation on FRITZ!Box 3390 (boot initramfs-kernel.bin is ok but check of the key linux_fs_start is not possible)