I have an asrock h97m / itx-ac motherboard with atheros ar8171 integrated ethernet card. How do I run openwrt?
Hello Al,
welcome to the OpenWrt forum!
You'll need to write the OpenWrt image for x86. If the CPU is 64bit select the 64 link, otherwise the appropriate link.
Check these links also:
https://openwrt.org/docs/guide-quick-start/factory_installation
https://openwrt.org/docs/guide-developer/uefi-bootable-image
Do you have a hard drive on this system or some flash memory?
Openwrt is ok., but atheros ar8171 card not working.
What should I install to work? I was looking for kmod-alx kernel module, but I could not find it.
Do you have the lspci command? If yes what does it output when you run it?
What is the output of dmesg?
root@OpenWrt:~# lspci
-ash: lspci: not found
dmesg long text. How do I upload?
root@OpenWrt:~# dmesg
[ 0.000000] Linux version 4.14.95 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7627-753531d)) #0 SMP Mon Jan 28 08:54:32 2019
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=c1e0f78c-02 rootfstype=ext4 rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c862ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c8630000-0x00000000c8636fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c8637000-0x00000000c925afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c925b000-0x00000000c96f0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c96f1000-0x00000000db48dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db48e000-0x00000000db4f1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000db4f2000-0x00000000db53afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db53b000-0x00000000db66efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000db66f000-0x00000000dbffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dbfff000-0x00000000dbffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./H97M-ITX/ac, BIOS P2.00 03/07/2018
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F00000000 write-back
[ 0.000000] 1 base 0100000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable
[ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 011FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdc000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd160-0x000fd16f] mapped at [ffffffffff400160]
[ 0.000000] Base memory trampoline at [ffff888000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x01e06000, 0x01e06fff] PGTABLE
[ 0.000000] BRK [0x01e07000, 0x01e07fff] PGTABLE
[ 0.000000] BRK [0x01e08000, 0x01e08fff] PGTABLE
[ 0.000000] BRK [0x01e09000, 0x01e09fff] PGTABLE
[ 0.000000] BRK [0x01e0a000, 0x01e0afff] PGTABLE
[ 0.000000] BRK [0x01e0b000, 0x01e0bfff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DB63D088 00008C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DB64D6D0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DB63D1A8 010525 (v02 ALASKA A M I 00000200 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000DB66EF80 000040
[ 0.000000] ACPI: APIC 0x00000000DB64D7E0 000062 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DB64D848 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: ASF! 0x00000000DB64D890 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000DB64D938 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000DB64DE78 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000DB64E9F0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DB64EA30 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DB64EA68 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DB64EDD8 005B5E (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: AAFT 0x00000000DB654938 00026F (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
[ 0.000000] ACPI: UEFI 0x00000000DB654BA8 000042 (v01 ALASKA A M I 01072009 00000000)
[ 0.000000] ACPI: SSDT 0x00000000DB654BF0 000579 (v01 Intel_ IsctTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000011fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c862ffff]
[ 0.000000] node 0: [mem 0x00000000c8637000-0x00000000c925afff]
[ 0.000000] node 0: [mem 0x00000000c96f1000-0x00000000db48dfff]
[ 0.000000] node 0: [mem 0x00000000db4f2000-0x00000000db53afff]
[ 0.000000] node 0: [mem 0x00000000dbfff000-0x00000000dbffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fdfffff]
[ 0.000000] On node 0 totalpages: 1027543
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13953 pages used for memmap
[ 0.000000] DMA32 zone: 892987 pages, LIFO batch:31
[ 0.000000] Normal zone: 2040 pages used for memmap
[ 0.000000] Normal zone: 130560 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000dd200000-0x00000000df1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.000000] random: get_random_bytes called from 0xffffffff81cb2b09 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 42 pages/cpu @ffff88811fa00000 s132056 r8192 d31784 u1048576
[ 0.000000] pcpu-alloc: s132056 r8192 d31784 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1011465
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=c1e0f78c-02 rootfstype=ext4 rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3957636K/4110172K available (8200K kernel code, 533K rwdata, 1328K rodata, 1072K init, 388K bss, 152536K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.010000] tsc: Detected 2793.529 MHz processor
[ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.05 BogoMIPS (lpj=27935290)
[ 0.010000] pid_max: default: 32768 minimum: 301
[ 0.010000] ACPI: Core revision 20170728
[ 0.023024] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.023179] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.023325] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.023566] mce: CPU supports 7 MCE banks
[ 0.023670] CPU0: Thermal monitoring enabled (TM1)
[ 0.023787] process: using mwait in idle threads
[ 0.023896] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.024024] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.024161] Spectre V2 : Mitigation: Full generic retpoline
[ 0.024281] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.024465] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.024606] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.024793] Speculative Store Bypass: Vulnerable
[ 0.024949] Freeing SMP alternatives memory: 28K
[ 0.025933] smpboot: Max logical packages: 1
[ 0.026387] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.126554] TSC deadline timer enabled
[ 0.126556] smpboot: CPU0: Intel(R) Celeron(R) CPU G1840 @ 2.80GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.126859] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.127142] ... version: 3
[ 0.127267] ... bit width: 48
[ 0.127392] ... generic registers: 8
[ 0.127517] ... value mask: 0000ffffffffffff
[ 0.127661] ... max period: 00007fffffffffff
[ 0.127805] ... fixed-purpose events: 3
[ 0.127929] ... event mask: 00000007000000ff
[ 0.128098] Hierarchical SRCU implementation.
[ 0.128295] smp: Bringing up secondary CPUs ...
[ 0.128469] x86: Booting SMP configuration:
[ 0.128597] .... node #0, CPUs: #1
[ 0.128832] smp: Brought up 1 node, 2 CPUs
[ 0.129083] smpboot: Total of 2 processors activated (11174.11 BogoMIPS)
[ 0.130000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.130000] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.130000] pinctrl core: initialized pinctrl subsystem
[ 0.130000] NET: Registered protocol family 16
[ 0.130000] cpuidle: using governor ladder
[ 0.130000] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.130000] ACPI: bus type PCI registered
[ 0.130000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.130000] PCI: Using configuration type 1 for base access
[ 0.130000] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.130000] ACPI: Added _OSI(Module Device)
[ 0.130000] ACPI: Added _OSI(Processor Device)
[ 0.130000] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.130000] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.130000] ACPI: Executed 15 blocks of module-level executable AML code
[ 0.133931] ACPI: Dynamic OEM Table Load:
[ 0.134062] ACPI: SSDT 0xFFFF88811A8D9C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.134425] ACPI: Dynamic OEM Table Load:
[ 0.134425] ACPI: SSDT 0xFFFF88811B2B1000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.136837] ACPI: Dynamic OEM Table Load:
[ 0.136965] ACPI: SSDT 0xFFFF88811B328000 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.137323] ACPI: Interpreter enabled
[ 0.137323] ACPI: (supports S0 S5)
[ 0.137323] ACPI: Using IOAPIC for interrupt routing
[ 0.137324] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.138773] ACPI: GPE 0x1E active on init
[ 0.139551] ACPI: Enabled 9 GPEs in block 00 to 3F
[ 0.140095] ACPI: Power Resource [PG00] (on)
[ 0.140830] ACPI: Power Resource [PG01] (on)
[ 0.141174] ACPI: Power Resource [PG02] (on)
[ 0.151656] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.151819] acpi PNP0A08:00: _OSC: OS supports [Segments MSI]
[ 0.152096] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.152618] PCI host bridge to bus 0000:00
[ 0.152747] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.152913] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.153079] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.153306] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.153533] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.153760] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.153986] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.154213] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.154440] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.154667] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.154894] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.155047] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.155123] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.155152] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.155242] pci 0000:00:02.0: [8086:0402] type 00 class 0x030000
[ 0.155252] pci 0000:00:02.0: reg 0x10: [mem 0xf7000000-0xf73fffff 64bit]
[ 0.155257] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.155261] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.155329] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.155336] pci 0000:00:03.0: reg 0x10: [mem 0xf7c14000-0xf7c17fff 64bit]
[ 0.155428] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[ 0.155447] pci 0000:00:14.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[ 0.155500] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.155557] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[ 0.155576] pci 0000:00:16.0: reg 0x10: [mem 0xf7c1d000-0xf7c1d00f 64bit]
[ 0.155633] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.155709] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[ 0.155728] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c1b000-0xf7c1b3ff]
[ 0.155805] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.155866] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[ 0.155881] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c10000-0xf7c13fff 64bit]
[ 0.155939] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.155997] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[ 0.156054] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.156140] pci 0000:00:1c.2: [8086:8c94] type 01 class 0x060400
[ 0.156198] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.156283] pci 0000:00:1c.7: [8086:8c9e] type 01 class 0x060400
[ 0.156341] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.156426] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[ 0.156445] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c1a000-0xf7c1a3ff]
[ 0.156522] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.156582] pci 0000:00:1f.0: [8086:8cc6] type 00 class 0x060100
[ 0.156734] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[ 0.156748] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.156754] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.156760] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.156767] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.156773] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.156779] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c19000-0xf7c197ff]
[ 0.156810] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.156864] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[ 0.156880] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c18000-0xf7c180ff 64bit]
[ 0.156897] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.156993] pci 0000:01:00.0: [1b21:1184] type 01 class 0x060400
[ 0.157049] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.157077] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.157222] pci 0000:00:01.0: bridge window [io 0xa000-0xdfff]
[ 0.157224] pci 0000:00:01.0: bridge window [mem 0xf7700000-0xf7afffff]
[ 0.157227] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf03fffff 64bit pref]
[ 0.157262] pci 0000:02:01.0: [1b21:1184] type 01 class 0x060400
[ 0.157321] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[ 0.157354] pci 0000:02:03.0: [1b21:1184] type 01 class 0x060400
[ 0.157413] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
[ 0.157444] pci 0000:02:05.0: [1b21:1184] type 01 class 0x060400
[ 0.157503] pci 0000:02:05.0: PME# supported from D0 D3hot D3cold
[ 0.157535] pci 0000:02:07.0: [1b21:1184] type 01 class 0x060400
[ 0.157594] pci 0000:02:07.0: PME# supported from D0 D3hot D3cold
[ 0.157632] pci 0000:01:00.0: PCI bridge to [bus 02-06]
[ 0.157779] pci 0000:01:00.0: bridge window [io 0xa000-0xdfff]
[ 0.157781] pci 0000:01:00.0: bridge window [mem 0xf7700000-0xf7afffff]
[ 0.157785] pci 0000:01:00.0: bridge window [mem 0xf0000000-0xf03fffff 64bit pref]
[ 0.157828] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.157850] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.157879] pci 0000:03:00.0: reg 0x18: [mem 0xf7a00000-0xf7a00fff 64bit]
[ 0.157897] pci 0000:03:00.0: reg 0x20: [mem 0xf0300000-0xf0303fff 64bit pref]
[ 0.157979] pci 0000:03:00.0: supports D1 D2
[ 0.157980] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.158012] pci 0000:02:01.0: PCI bridge to [bus 03]
[ 0.158155] pci 0000:02:01.0: bridge window [io 0xd000-0xdfff]
[ 0.158157] pci 0000:02:01.0: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.158161] pci 0000:02:01.0: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
[ 0.158205] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.158227] pci 0000:04:00.0: reg 0x10: [io 0xc000-0xc0ff]
[ 0.158256] pci 0000:04:00.0: reg 0x18: [mem 0xf7900000-0xf7900fff 64bit]
[ 0.158275] pci 0000:04:00.0: reg 0x20: [mem 0xf0200000-0xf0203fff 64bit pref]
[ 0.158356] pci 0000:04:00.0: supports D1 D2
[ 0.158357] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.158389] pci 0000:02:03.0: PCI bridge to [bus 04]
[ 0.158532] pci 0000:02:03.0: bridge window [io 0xc000-0xcfff]
[ 0.158534] pci 0000:02:03.0: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.158538] pci 0000:02:03.0: bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
[ 0.158582] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.158603] pci 0000:05:00.0: reg 0x10: [io 0xb000-0xb0ff]
[ 0.158633] pci 0000:05:00.0: reg 0x18: [mem 0xf7800000-0xf7800fff 64bit]
[ 0.158651] pci 0000:05:00.0: reg 0x20: [mem 0xf0100000-0xf0103fff 64bit pref]
[ 0.158732] pci 0000:05:00.0: supports D1 D2
[ 0.158733] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.158765] pci 0000:02:05.0: PCI bridge to [bus 05]
[ 0.158907] pci 0000:02:05.0: bridge window [io 0xb000-0xbfff]
[ 0.158910] pci 0000:02:05.0: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.158913] pci 0000:02:05.0: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.158957] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
[ 0.158979] pci 0000:06:00.0: reg 0x10: [io 0xa000-0xa0ff]
[ 0.159008] pci 0000:06:00.0: reg 0x18: [mem 0xf7700000-0xf7700fff 64bit]
[ 0.159026] pci 0000:06:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.159107] pci 0000:06:00.0: supports D1 D2
[ 0.159109] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.159140] pci 0000:02:07.0: PCI bridge to [bus 06]
[ 0.159282] pci 0000:02:07.0: bridge window [io 0xa000-0xafff]
[ 0.159284] pci 0000:02:07.0: bridge window [mem 0xf7700000-0xf77fffff]
[ 0.159288] pci 0000:02:07.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.159353] acpiphp: Slot [1] registered
[ 0.159480] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.159677] pci 0000:08:00.0: [1969:10a1] type 00 class 0x020000
[ 0.159703] pci 0000:08:00.0: reg 0x10: [mem 0xf7b00000-0xf7b3ffff 64bit]
[ 0.159715] pci 0000:08:00.0: reg 0x18: [io 0xe000-0xe07f]
[ 0.159819] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.159871] pci 0000:00:1c.2: PCI bridge to [bus 08]
[ 0.160029] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.160032] pci 0000:00:1c.2: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.160091] pci 0000:09:00.0: [168c:003c] type 00 class 0x028000
[ 0.160117] pci 0000:09:00.0: reg 0x10: [mem 0xf7400000-0xf75fffff 64bit]
[ 0.160167] pci 0000:09:00.0: reg 0x30: [mem 0xf7600000-0xf760ffff pref]
[ 0.160220] pci 0000:09:00.0: supports D1 D2
[ 0.160222] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.160268] pci 0000:00:1c.7: PCI bridge to [bus 09]
[ 0.160411] pci 0000:00:1c.7: bridge window [mem 0xf7400000-0xf76fffff]
[ 0.160430] pci_bus 0000:00: on NUMA node 0
[ 0.161043] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.161251] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.161456] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.161661] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.161865] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.162136] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.162407] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.162611] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.163017] SCSI subsystem initialized
[ 0.163145] libata version 3.00 loaded.
[ 0.163145] ACPI: bus type USB registered
[ 0.163306] usbcore: registered new interface driver usbfs
[ 0.163353] usbcore: registered new interface driver hub
[ 0.163610] usbcore: registered new device driver usb
[ 0.163791] PCI: Using ACPI for IRQ routing
[ 0.163791] PCI: pci_cache_line_size set to 64 bytes
[ 0.163791] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.163791] e820: reserve RAM buffer [mem 0xc925b000-0xcbffffff]
[ 0.163791] e820: reserve RAM buffer [mem 0xdb48e000-0xdbffffff]
[ 0.163791] e820: reserve RAM buffer [mem 0xdb53b000-0xdbffffff]
[ 0.163791] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[ 0.164125] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.164287] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.166453] clocksource: Switched to clocksource hpet
[ 0.166633] pnp: PnP ACPI init
[ 0.166644] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.166838] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.167012] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.167084] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.167245] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.167262] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.167293] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.167452] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.167516] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.167675] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.167772] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.167931] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.167931] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.167931] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.167931] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.167931] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.167931] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.167931] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.167931] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.167931] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.167931] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.167931] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.168300] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.168300] pnp: PnP ACPI: found 7 devices
[ 0.168985] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.169281] pci 0000:02:01.0: PCI bridge to [bus 03]
[ 0.169422] pci 0000:02:01.0: bridge window [io 0xd000-0xdfff]
[ 0.169581] pci 0000:02:01.0: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.169750] pci 0000:02:01.0: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
[ 0.169984] pci 0000:02:03.0: PCI bridge to [bus 04]
[ 0.170130] pci 0000:02:03.0: bridge window [io 0xc000-0xcfff]
[ 0.170289] pci 0000:02:03.0: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.170457] pci 0000:02:03.0: bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
[ 0.170691] pci 0000:02:05.0: PCI bridge to [bus 05]
[ 0.170831] pci 0000:02:05.0: bridge window [io 0xb000-0xbfff]
[ 0.170990] pci 0000:02:05.0: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.171158] pci 0000:02:05.0: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.171393] pci 0000:02:07.0: PCI bridge to [bus 06]
[ 0.171533] pci 0000:02:07.0: bridge window [io 0xa000-0xafff]
[ 0.171692] pci 0000:02:07.0: bridge window [mem 0xf7700000-0xf77fffff]
[ 0.171860] pci 0000:02:07.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.172094] pci 0000:01:00.0: PCI bridge to [bus 02-06]
[ 0.172239] pci 0000:01:00.0: bridge window [io 0xa000-0xdfff]
[ 0.172397] pci 0000:01:00.0: bridge window [mem 0xf7700000-0xf7afffff]
[ 0.172565] pci 0000:01:00.0: bridge window [mem 0xf0000000-0xf03fffff 64bit pref]
[ 0.172800] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.172944] pci 0000:00:01.0: bridge window [io 0xa000-0xdfff]
[ 0.173101] pci 0000:00:01.0: bridge window [mem 0xf7700000-0xf7afffff]
[ 0.173269] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf03fffff 64bit pref]
[ 0.173502] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.173649] pci 0000:00:1c.2: PCI bridge to [bus 08]
[ 0.173790] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.173949] pci 0000:00:1c.2: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.174120] pci 0000:00:1c.7: PCI bridge to [bus 09]
[ 0.174263] pci 0000:00:1c.7: bridge window [mem 0xf7400000-0xf76fffff]
[ 0.174435] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.174437] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.174438] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.174439] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.174440] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.174442] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.174443] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.174444] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.174445] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.174446] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.174448] pci_bus 0000:01: resource 0 [io 0xa000-0xdfff]
[ 0.174449] pci_bus 0000:01: resource 1 [mem 0xf7700000-0xf7afffff]
[ 0.174450] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf03fffff 64bit pref]
[ 0.174451] pci_bus 0000:02: resource 0 [io 0xa000-0xdfff]
[ 0.174453] pci_bus 0000:02: resource 1 [mem 0xf7700000-0xf7afffff]
[ 0.174454] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf03fffff 64bit pref]
[ 0.174455] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.174456] pci_bus 0000:03: resource 1 [mem 0xf7a00000-0xf7afffff]
[ 0.174457] pci_bus 0000:03: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref]
[ 0.174459] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.174460] pci_bus 0000:04: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.174461] pci_bus 0000:04: resource 2 [mem 0xf0200000-0xf02fffff 64bit pref]
[ 0.174462] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
[ 0.174463] pci_bus 0000:05: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.174465] pci_bus 0000:05: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
[ 0.174466] pci_bus 0000:06: resource 0 [io 0xa000-0xafff]
[ 0.174467] pci_bus 0000:06: resource 1 [mem 0xf7700000-0xf77fffff]
[ 0.174468] pci_bus 0000:06: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.174470] pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
[ 0.174471] pci_bus 0000:08: resource 1 [mem 0xf7b00000-0xf7bfffff]
[ 0.174472] pci_bus 0000:09: resource 1 [mem 0xf7400000-0xf76fffff]
[ 0.174566] NET: Registered protocol family 2
[ 0.174778] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.175034] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.175256] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.175437] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.175601] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.175790] NET: Registered protocol family 1
[ 0.175931] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.250113] pci 0000:08:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.250267] PCI: CLS 64 bytes, default 64
[ 0.250293] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.250454] software IO TLB: mapped [mem 0xd748e000-0xdb48e000] (64MB)
[ 0.250655] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 0.250888] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 0.251039] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 0.251187] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 0.251333] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 0.252050] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[ 0.252797] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.253652] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.253879] io scheduler noop registered
[ 0.254003] io scheduler deadline registered (default)
[ 0.254189] gpio_it87: no device
[ 0.254945] hv_vmbus: registering driver hv_pci
[ 0.255086] hv_vmbus: registering driver hyperv_fb
[ 0.255228] intel_idle: MWAIT substates: 0x2120
[ 0.255229] intel_idle: v0.4.1 model 0x3C
[ 0.255276] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.255417] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.255664] ACPI: Power Button [PWRB]
[ 0.255809] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.256054] ACPI: Sleep Button [SLPB]
[ 0.256196] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.256434] ACPI: Power Button [PWRF]
[ 0.256751] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.257367] Non-volatile memory driver v1.3
[ 0.258057] loop: module loaded
[ 0.258188] Guest personality initialized and is inactive
[ 0.258343] VMCI host device registered (name=vmci, major=10, minor=63)
[ 0.258507] Initialized host personality
[ 0.258676] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170728/utaddress-247)
[ 0.259076] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.259344] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR2) (20170728/utaddress-247)
[ 0.259741] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[ 0.260169] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.261906] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR2) (20170728/utaddress-247)
[ 0.262303] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)
[ 0.262700] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[ 0.263096] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.263362] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR2) (20170728/utaddress-247)
[ 0.263758] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)
[ 0.264155] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[ 0.264550] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.264817] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 0.265008] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.265160] hv_vmbus: registering driver hv_storvsc
[ 0.265320] ahci 0000:00:1f.2: version 3.0
[ 0.265448] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[ 0.265686] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.266206] scsi host0: ahci
[ 0.266381] scsi host1: ahci
[ 0.266550] scsi host2: ahci
[ 0.266698] scsi host3: ahci
[ 0.266858] scsi host4: ahci
[ 0.267024] scsi host5: ahci
[ 0.267169] ata1: SATA max UDMA/133 abar m2048@0xf7c19000 port 0xf7c19100 irq 24
[ 0.267396] ata2: DUMMY
[ 0.267497] ata3: DUMMY
[ 0.267599] ata4: DUMMY
[ 0.267701] ata5: DUMMY
[ 0.267803] ata6: DUMMY
[ 0.267995] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
[ 0.268164] hv_vmbus: registering driver hv_netvsc
[ 0.268301] Fusion MPT base driver 3.04.20
[ 0.268427] Copyright (c) 1999-2008 LSI Corporation
[ 0.268567] Fusion MPT SPI Host driver 3.04.20
[ 0.268706] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.268868] ehci-pci: EHCI PCI platform driver
[ 0.269094] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.269242] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.269476] ehci-pci 0000:00:1a.0: debug port 2
[ 0.273513] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.273522] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c1b000
[ 0.300040] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.300437] hub 1-0:1.0: USB hub found
[ 0.300581] hub 1-0:1.0: 2 ports detected
[ 0.300931] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.301078] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.301311] ehci-pci 0000:00:1d.0: debug port 2
[ 0.305341] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.305350] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c1a000
[ 0.330053] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.330318] hub 2-0:1.0: USB hub found
[ 0.330460] hub 2-0:1.0: 2 ports detected
[ 0.330712] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.330873] ohci-pci: OHCI PCI platform driver
[ 0.331013] ohci-platform: OHCI generic platform driver
[ 0.331164] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.331414] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.331560] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.332858] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 0.333116] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.333278] hub 3-0:1.0: USB hub found
[ 0.333416] hub 3-0:1.0: 14 ports detected
[ 0.335656] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.335802] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.336030] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.336344] hub 4-0:1.0: USB hub found
[ 0.336479] hub 4-0:1.0: 6 ports detected
[ 0.337844] usbcore: registered new interface driver usb-storage
[ 0.338019] i8042: PNP: No PS/2 controller found.
[ 0.338157] hv_vmbus: registering driver hyperv_keyboard
[ 0.338323] rtc_cmos 00:02: RTC can wake from S4
[ 0.338551] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.338730] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.339134] intel_pstate: Intel P-state driver initializing
[ 0.339342] sdhci: Secure Digital Host Controller Interface driver
[ 0.339594] sdhci: Copyright(c) Pierre Ossman
[ 0.340089] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.340343] hv_vmbus: registering driver hid_hyperv
[ 0.340590] usbcore: registered new interface driver usbhid
[ 0.340827] usbhid: USB HID core driver
[ 0.341042] hv_utils: Registering HyperV Utility Driver
[ 0.341272] hv_vmbus: registering driver hv_util
[ 0.341488] hv_vmbus: registering driver hv_balloon
[ 0.342021] NET: Registered protocol family 10
[ 0.342688] Segment Routing with IPv6
[ 0.342922] NET: Registered protocol family 17
[ 0.343149] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 0.343637] 8021q: 802.1Q VLAN Support v1.8
[ 0.343894] NET: Registered protocol family 40
[ 0.344466] microcode: sig=0x306c3, pf=0x2, revision=0x24
[ 0.344750] microcode: Microcode Update Driver: v2.2.
[ 0.344768] sched_clock: Marking stable (344273991, 0)->(345392165, -1118174)
[ 0.345395] registered taskstats version 1
[ 0.346755] rtc_cmos 00:02: setting system clock to 2019-05-25 08:06:49 UTC (1558771609)
[ 0.602054] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.602517] ata1.00: ATA-11: MSH-64T, 2.07.03, max UDMA/133
[ 0.602762] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.603242] ata1.00: configured for UDMA/133
[ 0.603703] scsi 0:0:0:0: Direct-Access ATA MSH-64T .03 PQ: 0 ANSI: 5
[ 0.604796] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 0.605038] sd 0:0:0:0: [sda] Write Protect is off
[ 0.605177] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.605210] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.605794] sda: sda1 sda2 sda3
[ 0.606105] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.620079] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 0.620255] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 0.620893] Freeing unused kernel memory: 1072K
[ 0.660119] Write protecting the kernel read-only data: 12288k
[ 0.661200] Freeing unused kernel memory: 2024K
[ 0.664796] Freeing unused kernel memory: 720K
[ 0.670073] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.679274] init: Console is alive
[ 0.700051] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.742515] random: fast init done
[ 0.749273] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 0.752279] pps_core: LinuxPPS API ver. 1 registered
[ 0.752494] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.753473] PTP clock support registered
[ 0.754981] Button Hotplug driver version 0.4.1
[ 0.756568] ehci-platform: EHCI generic platform driver
[ 0.757732] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 0.760478] init: - preinit -
[ 0.784908] random: jshn: uninitialized urandom read (4 bytes read)
[ 0.787740] random: jshn: uninitialized urandom read (4 bytes read)
[ 0.789029] random: jshn: uninitialized urandom read (4 bytes read)
[ 0.870844] hub 1-1:1.0: USB hub found
[ 0.871250] hub 1-1:1.0: 6 ports detected
[ 0.900692] hub 2-1:1.0: USB hub found
[ 0.900993] hub 2-1:1.0: 8 ports detected
[ 1.280063] tsc: Refined TSC clocksource calibration: 2793.530 MHz
[ 1.280329] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x284460f1a18, max_idle_ns: 440795261562 ns
[ 2.290239] clocksource: Switched to clocksource tsc
[ 3.817683] mount_root: mounting /dev/root
[ 3.817960] EXT4-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended
[ 3.820895] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 3.821053] mount_root: loading kmods from internal overlay
[ 3.823084] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 3.823398] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 3.836420] block: attempting to load /etc/config/fstab
[ 3.836818] block: extroot: not configured
[ 3.844674] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
[ 3.846499] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 3.847379] urandom-seed: Seeding with /etc/urandom.seed
[ 3.849454] procd: - early -
[ 3.932291] urandom_read: 4 callbacks suppressed
[ 3.932292] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.940271] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.948566] random: jshn: uninitialized urandom read (4 bytes read)
[ 4.425979] procd: - ubus -
[ 4.434030] Adding 524284k swap on /dev/sda3. Priority:-2 extents:1 across:524284k SS
[ 4.475563] procd: - init -
[ 4.484327] kmodloader: loading kernel modules from /etc/modules.d/*
[ 4.487641] Key type dns_resolver registered
[ 4.489262] RPC: Registered named UNIX socket transport module.
[ 4.489418] RPC: Registered udp transport module.
[ 4.489553] RPC: Registered tcp transport module.
[ 4.489688] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.491274] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 4.491447] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 4.492369] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 4.492539] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 4.494877] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 4.495726] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.496622] Netfilter messages via NETLINK v0.30.
[ 4.496972] ip_set: protocol 6
[ 4.499005] i2c /dev entries driver
[ 4.505407] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 4.505562] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 4.505964] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.507190] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 4.511581] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.541185] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc90000039000, 00:e0:4c:68:86:02, XID 0c000800 IRQ 26
[ 4.541577] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 4.541967] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.571071] r8169 0000:04:00.0 eth1: RTL8168g/8111g at 0xffffc90000041000, 00:e0:4c:68:86:03, XID 0c000800 IRQ 27
[ 4.571380] r8169 0000:04:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 4.571682] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.601083] r8169 0000:05:00.0 eth2: RTL8168g/8111g at 0xffffc90000051000, 00:e0:4c:68:86:04, XID 0c000800 IRQ 28
[ 4.601383] r8169 0000:05:00.0 eth2: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 4.601691] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.631068] r8169 0000:06:00.0 eth3: RTL8168g/8111g at 0xffffc90000061000, 00:e0:4c:68:86:05, XID 0c000800 IRQ 29
[ 4.631386] r8169 0000:06:00.0 eth3: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 4.632559] usbcore: registered new interface driver usbserial
[ 4.632754] usbcore: registered new interface driver usbserial_generic
[ 4.632955] usbserial: USB Serial support registered for generic
[ 4.636589] xt_time: kernel timezone is -0000
[ 4.638015] PPP generic driver version 2.4.2
[ 4.638408] NET: Registered protocol family 24
[ 4.639113] usbcore: registered new interface driver option
[ 4.639299] usbserial: USB Serial support registered for GSM modem (1-port)
[ 4.640001] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 5.012227] r8169 0000:03:00.0 eth0: link down
[ 5.012237] r8169 0000:03:00.0 eth0: link down
[ 5.013004] br-lan: port 1(eth0) entered blocking state
[ 5.013240] br-lan: port 1(eth0) entered disabled state
[ 5.013596] device eth0 entered promiscuous mode
[ 5.014259] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 5.112210] r8169 0000:05:00.0 eth2: link down
[ 5.112893] br-lan: port 2(eth2) entered blocking state
[ 5.113112] br-lan: port 2(eth2) entered disabled state
[ 5.113438] device eth2 entered promiscuous mode
[ 5.113690] br-lan: port 2(eth2) entered blocking state
[ 5.113906] br-lan: port 2(eth2) entered forwarding state
[ 5.114168] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 5.212218] r8169 0000:06:00.0 eth3: link down
[ 5.212857] br-lan: port 3(eth3) entered blocking state
[ 5.213076] br-lan: port 3(eth3) entered disabled state
[ 5.213395] device eth3 entered promiscuous mode
[ 5.213646] br-lan: port 3(eth3) entered blocking state
[ 5.213862] br-lan: port 3(eth3) entered forwarding state
[ 5.312217] r8169 0000:04:00.0 eth1: link down
[ 5.312226] r8169 0000:04:00.0 eth1: link down
[ 5.312529] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 5.461711] svc: failed to register nfsdv3 RPC service (errno 97).
[ 5.523110] svc: failed to register lockdv1 RPC service (errno 97).
[ 5.523492] NFSD: the nfsdcld client tracking upcall will be removed in 3.10. Please transition to using nfsdcltrack.
[ 5.523882] NFSD: starting 90-second grace period (net ffffffff81c6e200)
[ 5.550159] br-lan: port 2(eth2) entered disabled state
[ 5.550385] br-lan: port 3(eth3) entered disabled state
[ 7.850037] r8169 0000:03:00.0 eth0: link up
[ 7.850440] br-lan: port 1(eth0) entered blocking state
[ 7.850671] br-lan: port 1(eth0) entered forwarding state
[ 8.258695] r8169 0000:04:00.0 eth1: link up
[ 8.258919] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 9.092787] r8169 0000:04:00.0 eth1: link down
[ 12.033345] r8169 0000:04:00.0 eth1: link up
[ 13.576396] pppoe-wan: renamed from ppp0
[ 14.456671] pppoe-wan: renamed from ppp0
I can see 4 ethernet cards detected here. What seems to be the problem?
Can't you see them in ifconfig ?
There are 5 Ethernet cards. 4 realtek 1 atheros. I want the atheros card to wan port.
I see only 4 cards in ifconfig.
I tried linuxmint live cd, which saw all 5 cards.
The necessary mainline kernel module would be alx, which currently isn't packaged for OpenWrt and is also globally disabled. The correct way would be to package it up, alternatively you could also build your own OpenWrt image with KERNEL_CONFIG_ALX=y.
1 Like
How to do it? Be kind to write down step by step, because I don't get that much.
This is not understandable to me. 
I don't know how to do this yet.
That's good?:
## Code
This code has now been posted for inclusion upstream. If you want to install this driver right now you can also do so by downloading this tarball:
https://www.kernel.org/pub/linux/kernel/projects/backports/2013/03/04/compat-drivers-2013-03-04-u.tar.bz2
## Install
To only compile and install the alx driver you can do:
./scripts/driver-select alx
make
sudo make install
No, I've given you a functional option - yours isn't.
Because I'm not familiar with it, I can't do it.
Another alternative would be a 5 bucks Realtek r8168 card.
Thanks, but no good.
This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.