-----------------------------------------------------------------------------------------------------------------------------------
Kernel Log:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.195 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11208-ce6496d796)) #0 SMP Sun Sep 6 16:19:39 2020
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Netgear Nighthawk X4S R7800
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 122880
[ 0.000000] free_area_init_node: node 0, pgdat c0a27880, node_mem_map dda39000
[ 0.000000] Normal zone: 960 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 122880 pages, LIFO batch:31
[ 0.000000] random: get_random_bytes called from 0xc09008e0 with crng_init=0
[ 0.000000] percpu: Embedded 15 pages/cpu s29388 r8192 d23860 u61440
[ 0.000000] pcpu-alloc: s29388 r8192 d23860 u61440 alloc=15*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 121920
[ 0.000000] Kernel command line:
[ 0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 477372K/491520K available (4978K kernel code, 160K rwdata, 756K rodata, 1024K init, 235K bss, 14148K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc07dc880 (5971 kB)
[ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB)
[ 0.000000] .data : 0xc0a00000 - 0xc0a28180 ( 161 kB)
[ 0.000000] .bss : 0xc0a2a000 - 0xc0a64e18 ( 236 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000007] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000023] Switching to timer-based delay loop, resolution 160ns
[ 0.000230] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000257] pid_max: default: 32768 minimum: 301
[ 0.000385] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000403] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000970] CPU: Testing write buffer coherency: ok
[ 0.001741] Setting up static identity map for 0x42300000 - 0x42300060
[ 0.001896] Hierarchical SRCU implementation.
[ 0.002624] smp: Bringing up secondary CPUs ...
[ 0.004463] smp: Brought up 1 node, 2 CPUs
[ 0.004480] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.004490] CPU: All CPU(s) started in SVC mode.
[ 0.014669] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.014839] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.014865] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.014967] pinctrl core: initialized pinctrl subsystem
[ 0.015947] NET: Registered protocol family 16
[ 0.016204] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.017503] cpuidle: using governor ladder
[ 0.017568] cpuidle: using governor menu
[ 0.040074] msm_bus_fabric_init_driver
[ 0.041570] usbcore: registered new interface driver usbfs
[ 0.041649] usbcore: registered new interface driver hub
[ 0.041737] usbcore: registered new device driver usb
[ 0.041790] pps_core: LinuxPPS API ver. 1 registered
[ 0.041802] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.041834] PTP clock support registered
[ 0.043511] clocksource: Switched to clocksource dg_timer
[ 0.046599] NET: Registered protocol family 2
[ 0.047201] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.047240] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.047296] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.047387] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.047415] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.047595] NET: Registered protocol family 1
[ 0.047642] PCI: CLS 0 bytes, default 64
[ 0.048771] No memory allocated for crashlog
[ 0.049067] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.053846] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.053864] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.060365] io scheduler noop registered
[ 0.060384] io scheduler deadline registered (default)
[ 0.062045] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
[ 0.062152] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.062248] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.063022] OF: PCI: host bridge /soc/pci@1b500000 ranges:
[ 0.063064] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.063087] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.171212] qcom-pcie 1b500000.pci: link up
[ 0.171381] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.171404] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.171424] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.171438] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.171455] pci_bus 0000:00: scanning bus
[ 0.171507] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.171597] pci 0000:00:00.0: calling 0xc030d3c0
[ 0.171667] pci 0000:00:00.0: supports D1
[ 0.171676] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.171694] pci 0000:00:00.0: PME# disabled
[ 0.171946] pci_bus 0000:00: fixups for bus
[ 0.171970] PCI: bus0: Fast back to back transfers disabled
[ 0.171992] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[ 0.172113] pci_bus 0000:01: scanning bus
[ 0.172290] pci 0000:01:00.0: [168c:0046] type 00 class 0x028000
[ 0.172639] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.173103] pci 0000:01:00.0: calling 0xc030d3c0
[ 0.173857] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.173898] pci 0000:01:00.0: PME# disabled
[ 0.174223] pci_bus 0000:01: fixups for bus
[ 0.174295] PCI: bus1: Fast back to back transfers disabled
[ 0.174309] pci_bus 0000:01: bus scan returning with max=01
[ 0.174328] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[ 0.174344] pci_bus 0000:00: bus scan returning with max=ff
[ 0.174393] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[ 0.174418] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.174544] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.174567] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.174598] pci 0000:00:00.0: calling 0xc055ff28
[ 0.174790] pcieport 0000:00:00.0: assign IRQ: got 67
[ 0.175087] pcieport 0000:00:00.0: AER enabled with IRQ 35
[ 0.175202] pci 0000:01:00.0: calling 0xc055ff28
[ 0.175608] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
[ 0.175717] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.175811] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.176581] OF: PCI: host bridge /soc/pci@1b700000 ranges:
[ 0.176618] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.176641] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.286453] qcom-pcie 1b700000.pci: link up
[ 0.286607] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.286626] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.286640] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.286654] pci_bus 0001:00: scanning bus
[ 0.286695] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[ 0.286769] pci 0001:00:00.0: calling 0xc030d3c0
[ 0.286832] pci 0001:00:00.0: supports D1
[ 0.286842] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.286856] pci 0001:00:00.0: PME# disabled
[ 0.287080] pci_bus 0001:00: fixups for bus
[ 0.287099] PCI: bus0: Fast back to back transfers disabled
[ 0.287117] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[ 0.287227] pci_bus 0001:01: scanning bus
[ 0.287415] pci 0001:01:00.0: [168c:0046] type 00 class 0x028000
[ 0.287787] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.288285] pci 0001:01:00.0: calling 0xc030d3c0
[ 0.288977] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.289021] pci 0001:01:00.0: PME# disabled
[ 0.289362] pci_bus 0001:01: fixups for bus
[ 0.289438] PCI: bus1: Fast back to back transfers disabled
[ 0.289452] pci_bus 0001:01: bus scan returning with max=01
[ 0.289469] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[ 0.289486] pci_bus 0001:00: bus scan returning with max=ff
[ 0.289522] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.289544] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.289677] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.289697] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.289724] pci 0001:00:00.0: calling 0xc055ff28
[ 0.289901] pcieport 0001:00:00.0: assign IRQ: got 100
[ 0.290165] pcieport 0001:00:00.0: AER enabled with IRQ 68
[ 0.290275] pci 0001:01:00.0: calling 0xc055ff28
[ 0.292517] L2 @ QSB rate. Forcing new rate.
[ 0.292728] L2 @ 384000 KHz
[ 0.292903] CPU0 @ 800000 KHz
[ 0.292916] CPU1 @ QSB rate. Forcing new rate.
[ 0.293044] CPU1 @ 384000 KHz
[ 0.297020] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 0.298954] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.301465] msm_serial 16340000.serial: msm_serial: detected port #0
[ 0.301565] msm_serial 16340000.serial: uartclk = 7372800
[ 0.301648] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 101, base_baud = 460800) is a MSM
[ 0.301689] msm_serial: console setup on port #0
[ 1.021424] console [ttyMSM0] enabled
[ 1.026224] msm_serial: driver initialized
[ 1.034679] loop: module loaded
[ 1.036702] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xa1
[ 1.036739] nand: AMD/Spansion S34MS01G2
[ 1.043230] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.047334] 8 fixed-partitions partitions found on MTD device qcom_nand.0
[ 1.054616] Creating 8 MTD partitions on "qcom_nand.0":
[ 1.061375] 0x000000000000-0x000000c80000 : "qcadata"
[ 1.071495] random: fast init done
[ 1.089299] 0x000000c80000-0x000001180000 : "APPSBL"
[ 1.098867] 0x000001180000-0x000001200000 : "APPSBLENV"
[ 1.100495] 0x000001200000-0x000001340000 : "art"
[ 1.105843] 0x000001340000-0x000001480000 : "artbak"
[ 1.110685] 0x000001480000-0x000001880000 : "kernel"
[ 1.120520] 0x000001880000-0x000007900000 : "ubi"
[ 1.290685] 0x000007900000-0x000008000000 : "reserve"
[ 1.305006] libphy: GPIO Bitbanged MDIO: probed
[ 1.326632] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[ 2.186210] ar8327: qca,phy-rgmii-en is not specified
[ 2.186604] libphy: Fixed MDIO Bus: probed
[ 2.192423] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
[ 2.194633] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 2.200750] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
[ 2.205879] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
[ 2.211863] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
[ 2.219924] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
[ 2.227487] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
[ 2.234514] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
[ 2.242328] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
[ 2.248229] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
[ 2.255606] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 2.263928] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
[ 2.271084] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 2.277324] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
[ 2.282258] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
[ 2.288403] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
[ 2.296401] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
[ 2.303961] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
[ 2.310907] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
[ 2.318861] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
[ 2.324703] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
[ 2.332000] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 2.339521] i2c /dev entries driver
[ 2.348316] Calibration not found.
[ 2.351756] Speed bin: 0
[ 2.354145] PVS bin: 4
[ 2.358036] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[ 2.358970] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[ 2.366780] sdhci: Secure Digital Host Controller Interface driver
[ 2.373400] sdhci: Copyright(c) Pierre Ossman
[ 2.379716] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.385485] NET: Registered protocol family 10
[ 2.391190] Segment Routing with IPv6
[ 2.394260] NET: Registered protocol family 17
[ 2.397850] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 2.402758] 8021q: 802.1Q VLAN Support v1.8
[ 2.415382] Registering SWP/SWPB emulation handler
[ 2.431816] qcom_rpm 108000.rpm: RPM firmware 3.0.16777364
[ 2.444145] s1a: supplied by regulator-dummy
[ 2.444249] s1a: Bringing 0uV into 1050000-1050000uV
[ 2.447736] s1b: supplied by regulator-dummy
[ 2.452479] s1b: Bringing 0uV into 1050000-1050000uV
[ 2.456996] s2a: supplied by regulator-dummy
[ 2.461697] s2a: Bringing 0uV into 775000-775000uV
[ 2.466202] s2b: supplied by regulator-dummy
[ 2.470542] s2b: Bringing 0uV into 775000-775000uV
[ 2.479900] UBI: auto-attach mtd6
[ 2.479932] ubi0: attaching mtd6
[ 2.532581] random: crng init done
[ 3.196610] ubi0: scanning is finished
[ 3.206294] ubi0: attached mtd6 (name "ubi", size 96 MiB)
[ 3.206315] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 3.210662] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 3.217505] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 3.224353] ubi0: good PEBs: 772, bad PEBs: 0, corrupted PEBs: 0
[ 3.231061] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 3.237372] ubi0: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 1347866555
[ 3.244402] ubi0: available PEBs: 0, total reserved PEBs: 772, PEBs reserved for bad PEB handling: 20
[ 3.253725] ubi0: background thread "ubi_bgt0d" started, PID 59
[ 3.254365] block ubiblock0_0: created from ubi0:0(rootfs)
[ 3.268548] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 3.274082] hctosys: unable to open rtc device (rtc0)
[ 3.287888] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 3.289981] Freeing unused kernel memory: 1024K
[ 3.729809] init: Console is alive
[ 3.730065] init: - watchdog -
[ 4.210459] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 4.226751] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.228316] SCSI subsystem initialized
[ 4.234044] libata version 3.00 loaded.
[ 4.235834] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[ 4.235920] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[ 4.241372] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[ 4.250588] scsi host0: ahci
[ 4.258396] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 26
[ 4.585824] ata1: SATA link down (SStatus 0 SControl 300)
[ 4.587594] ehci-platform: EHCI generic platform driver
[ 4.593207] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.595800] ohci-platform: OHCI generic platform driver
[ 4.730413] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.730505] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 4.735210] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[ 4.742439] xhci-hcd xhci-hcd.0.auto: irq 105, io mem 0x11000000
[ 4.752472] hub 1-0:1.0: USB hub found
[ 4.758164] hub 1-0:1.0: 1 port detected
[ 4.761721] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.765683] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 4.770909] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 4.778629] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.785445] hub 2-0:1.0: USB hub found
[ 4.793407] hub 2-0:1.0: 1 port detected
[ 4.797225] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 4.801036] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 4.806549] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[ 4.813956] xhci-hcd xhci-hcd.1.auto: irq 106, io mem 0x10000000
[ 4.823610] hub 3-0:1.0: USB hub found
[ 4.829588] hub 3-0:1.0: 1 port detected
[ 4.833221] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 4.837212] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 4.842437] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 4.850124] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.856953] hub 4-0:1.0: USB hub found
[ 4.865036] hub 4-0:1.0: 1 port detected
[ 4.869960] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 4.875423] init: - preinit -
[ 6.528343] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
[ 6.529460] dwmac1000: Master AXI performs any burst length
[ 6.537342] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 6.542744] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 6.552488] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 7.594292] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 7.596131] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 9.733151] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 142
[ 9.789048] UBIFS (ubi0:1): recovery needed
[ 9.915473] UBIFS (ubi0:1): recovery completed
[ 9.915549] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 9.918849] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 9.926783] UBIFS (ubi0:1): FS size: 90406912 bytes (86 MiB, 712 LEBs), journal size 4571136 bytes (4 MiB, 36 LEBs)
[ 9.936690] UBIFS (ubi0:1): reserved for root: 4270141 bytes (4170 KiB)
[ 9.946930] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 733B48E5-0056-4072-8356-CD8F33F0095F, small LPT model
[ 9.958914] mount_root: switching to ubifs overlay
[ 9.995145] urandom-seed: Seeding with /etc/urandom.seed
[ 10.101758] procd: - early -
[ 10.101903] procd: - watchdog -
[ 10.749926] procd: - watchdog -
[ 10.750448] procd: - ubus -
[ 10.810702] procd: - init -
[ 11.019718] kmodloader: loading kernel modules from /etc/modules.d/*
[ 11.021786] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 11.028249] Loading modules backported from Linux version v4.19.137-0-gc076c79e03c6
[ 11.030425] Backport generated by backports.git v4.19.137-1-0-g60c3a249
[ 11.041880] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.046684] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 11.048672] urngd: v1.0.2 started.
[ 11.065243] xt_time: kernel timezone is -0000
[ 11.078185] PPP generic driver version 2.4.2
[ 11.078578] NET: Registered protocol family 24
[ 11.086780] ath10k_pci 0000:01:00.0: assign IRQ: got 67
[ 11.086802] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x46.
[ 11.087205] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 11.093725] ath10k_pci 0000:01:00.0: enabling bus mastering
[ 11.094254] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 11.268714] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:01:00.0.txt failed with error -2
[ 11.268770] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 11.432348] firmware ath10k!fwcfg-pci-0000:01:00.0.txt: firmware_loading_store: map pages failed
[ 11.444098] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/ct-firmware-5.bin failed with error -2
[ 11.444126] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 11.472920] firmware ath10k!QCA9984!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[ 11.473136] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/ct-firmware-2.bin failed with error -2
[ 11.481216] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 11.506810] firmware ath10k!QCA9984!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[ 11.506980] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
[ 11.515084] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 11.542377] firmware ath10k!QCA9984!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 11.827829] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 11.827871] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 11.839983] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9984-fW-13-795874169 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 f3d4b769
[ 14.165705] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:1 crc32 85498734
[ 19.982019] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 19.982052] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
[ 20.064139] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 20.065001] ath10k_pci 0000:01:00.0: wmi print 'free: 84920 iram: 13316 sram: 11224'
[ 20.259987] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 20.412587] ath: EEPROM regdomain: 0x0
[ 20.412599] ath: EEPROM indicates default country code should be used
[ 20.412607] ath: doing EEPROM country->regdmn map search
[ 20.412621] ath: country maps to regdmn code: 0x3a
[ 20.412631] ath: Country alpha2 being used: US
[ 20.412640] ath: Regpair used: 0x3a
[ 20.417260] ath10k_pci 0001:01:00.0: assign IRQ: got 100
[ 20.417296] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x46.
[ 20.418404] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 20.424334] ath10k_pci 0001:01:00.0: enabling bus mastering
[ 20.424962] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 20.605713] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/fwcfg-pci-0001:01:00.0.txt failed with error -2
[ 20.605747] ath10k_pci 0001:01:00.0: Falling back to user helper
[ 20.748646] firmware ath10k!fwcfg-pci-0001:01:00.0.txt: firmware_loading_store: map pages failed
[ 20.750820] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/ct-firmware-5.bin failed with error -2
[ 20.756625] ath10k_pci 0001:01:00.0: Falling back to user helper
[ 20.790531] firmware ath10k!QCA9984!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[ 20.790791] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/ct-firmware-2.bin failed with error -2
[ 20.798831] ath10k_pci 0001:01:00.0: Falling back to user helper
[ 20.825095] firmware ath10k!QCA9984!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[ 20.825247] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
[ 20.833293] ath10k_pci 0001:01:00.0: Falling back to user helper
[ 20.873409] firmware ath10k!QCA9984!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 20.873577] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 20.881367] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 20.893264] ath10k_pci 0001:01:00.0: firmware ver 10.4b-ct-9984-fW-13-795874169 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 f3d4b769
[ 23.232667] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:2 crc32 85498734
[ 29.106078] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 29.106103] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32
[ 29.190176] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 29.191046] ath10k_pci 0001:01:00.0: wmi print 'free: 84920 iram: 13316 sram: 11224'
[ 29.470852] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 29.576616] ath: EEPROM regdomain: 0x0
[ 29.576631] ath: EEPROM indicates default country code should be used
[ 29.576640] ath: doing EEPROM country->regdmn map search
[ 29.576657] ath: country maps to regdmn code: 0x3a
[ 29.576671] ath: Country alpha2 being used: US
[ 29.576681] ath: Regpair used: 0x3a
[ 29.585747] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 32.629700] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
[ 32.630369] dwmac1000: Master AXI performs any burst length
[ 32.638715] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 32.644118] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 32.653087] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 32.672627] br-lan: port 1(eth1.1) entered blocking state
[ 32.672654] br-lan: port 1(eth1.1) entered disabled state
[ 32.677267] device eth1.1 entered promiscuous mode
[ 32.682379] device eth1 entered promiscuous mode
[ 32.690069] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 32.698485] Generic PHY fixed-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:00, irq=POLL)
[ 32.699162] dwmac1000: Master AXI performs any burst length
[ 32.707749] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 32.713129] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[ 32.722512] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.736749] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[ 32.739771] IPv6: ADDRCONF(NETDEV_UP): br-Media5G: link is not ready
[ 33.673914] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 33.753925] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 39.408923] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 39.408951] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
[ 39.491027] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 39.491860] ath10k_pci 0000:01:00.0: wmi print 'free: 84920 iram: 13316 sram: 11224'
[ 39.842958] ath10k_pci 0000:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 39.870362] br-lan: port 1(eth1.1) entered blocking state
[ 39.870389] br-lan: port 1(eth1.1) entered forwarding state
[ 39.875141] br-Media5G: port 1(wlan0) entered blocking state
[ 39.880136] br-Media5G: port 1(wlan0) entered disabled state
[ 39.886323] device wlan0 entered promiscuous mode
[ 40.407458] ath10k_pci 0000:01:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
[ 45.935001] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 45.935068] ath10k_pci 0001:01:00.0: msdu-desc: 2500 skid: 32
[ 46.019081] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 46.019957] ath10k_pci 0001:01:00.0: wmi print 'free: 84920 iram: 13316 sram: 11224'
[ 46.396814] ath10k_pci 0001:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 46.753588] br-Media5G: port 2(wlan1-1) entered blocking state
[ 46.753641] br-Media5G: port 2(wlan1-1) entered disabled state
[ 46.758889] device wlan1-1 entered promiscuous mode
[ 46.770985] br-Media5G: port 2(wlan1-1) entered blocking state
[ 46.771010] br-Media5G: port 2(wlan1-1) entered forwarding state
[ 48.715773] ath10k_pci 0001:01:00.0: Invalid peer id 1 or peer stats buffer, peer: dc940c00 sta: (null)
[ 52.701932] br-Media5G: port 1(wlan0) entered blocking state
[ 52.701958] br-Media5G: port 1(wlan0) entered forwarding state
[ 79.108179] ath10k_pci 0000:01:00.0: Invalid VHT mcs 15 peer stats