I installed openwrt and enabled wifi there is wifi 4 , but from pc i dont see wireless ssid.He can scan and see others but my pc and mobile dont see router.
Its on g standard how to change to n.
And wifi 5 is not enabled at all
How to make it work ok?
I think that asus router have active bootloader, can i with that flash image to unbrick like i maked with asus rt 10.I cant now remember how to do that.
am not clear how to go in rescue mode it goes like power off all at router, than hold long reset button (how long 2 3 5 minutes) than plug in power cord than stil keep pressing long(how long) and my all leds keep blinking like is bricked and router is
yes i did , i was do all as says (exectly now with same ip 192.168.1.10 but with 192.168.1.66 i will try that now) and before i do upload firmware i have to enable rescue mode.
Device discovery app dont see router
if you used the Asus restoration tool for installing OpenWRT, you should be able to follow the same instruction for installing stock fw, or Merlin, if available ?
I holded reset button 3 minutes before i plug in power cable and 3 miutes after i plug in power cable no blinking slowly led power on router.All tim led light power on router is lite on all time on.
i will use stock, merlin wrt becouse openwrt dont work 5ghz radio
on youtube i can see how peoples do make to go in rescue mod. i follow same steps but when i reset another move is blink all leds never slow blinking powe led like shoud be