Had some more time and found few typos. And i now have a booting OpenWrt in my Lyra Mini.
I did some quess work and i have working led atleast 
Have to do some more reseach as what i can see spi is not working correctly even i2c is?
Summary
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00110
S - IMAGE_VARIANT_STRING=DAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000021
S - Reset status Config, 0x00000000
S - Core 0 Frequency, 0 MHz
B - 261 - PBL, Start
B - 1338 - bootable_media_detect_entry, Start
B - 1678 - bootable_media_detect_success, Start
B - 1692 - elf_loader_entry, Start
B - 5069 - auth_hash_seg_entry, Start
B - 7210 - auth_hash_seg_exit, Start
B - 578514 - elf_segs_hash_verify_entry, Start
B - 694668 - PBL, End
B - 694692 - SBL1, Start
B - 784962 - pm_device_init, Start
D - 7 - pm_device_init, Delta
B - 786487 - boot_flash_init, Start
D - 54291 - boot_flash_init, Delta
B - 844922 - boot_config_data_table_init, Start
D - 3838 - boot_config_data_table_init, Delta - (419 Bytes)
B - 852133 - clock_init, Start
D - 7581 - clock_init, Delta
B - 864213 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:1,Subtype:0
B - 867627 - sbl1_ddr_set_params, Start
B - 872724 - cpr_init, Start
D - 2 - cpr_init, Delta
B - 877106 - Pre_DDR_clock_init, Start
D - 5 - Pre_DDR_clock_init, Delta
D - 13176 - sbl1_ddr_set_params, Delta
B - 890838 - pm_driver_init, Start
D - 2 - pm_driver_init, Delta
B - 960694 - sbl1_wait_for_ddr_training, Start
D - 27 - sbl1_wait_for_ddr_training, Delta
B - 976165 - Image Load, Start
D - 138334 - QSEE Image Loaded, Delta - (268920 Bytes)
B - 1114927 - Image Load, Start
D - 1442 - SEC Image Loaded, Delta - (2048 Bytes)
B - 1125341 - Image Load, Start
D - 230815 - APPSBL Image Loaded, Delta - (472067 Bytes)
B - 1356554 - QSEE Execution, Start
D - 60 - QSEE Execution, Delta
B - 1362771 - SBL1, End
D - 670156 - SBL1, Delta
S - Flash Throughput, 2007 KB/s (743454 Bytes, 370406 us)
S - DDR Frequency, 537 MHz
U-Boot 2012.07-00902-g5f098b3-dirty [local,local] (Apr 07 2017 - 13:30:39)
MAP-AC1300 bootloader version: 1.0.0.5
smem ram ptable found: ver: 1 len: 3
ASUS MAP-AC1300 gpio init : wps / reset pin
RAM Configuration:
Bank #0: 80000000 256 MiB
machid : 0x8010100
Maximum malloc length: 4096 KBytes
mem_malloc_start/brk/end: 0x86ee0000/86ee0000/872f0000
Relocation offset: 0
NAND: spi_nand: spi_nand_flash_probe SF NAND ID c8:b1:48:c8
SF: Detected GD5F1GQ4XC with page size 2 KiB, total 128 MiB
SF: Detected MX25L1605D with page size 4 KiB, total 2 MiB
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x200000
130 MiB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
name : offset size
0:SBL1 : 00000000 00040000
0:MIBIB : 00040000 00020000
0:QSEE : 00060000 00060000
0:CDT : 000c0000 00010000
0:DDRPARAMS : 000d0000 00010000
0:APPSBLENV : 000e0000 00010000
0:APPSBL : 000f0000 00080000
0:ART : 00170000 00010000
machid: 8010100
flash_type: 0
Set ENGX pattern failed !!
LP5523 Chip addresses: 32
Creating 1 MTD partitions on "nand1":
0x00000000-0x08000000 : "mtd=0"
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: max. sequence number: 8252
UBI: attached mtd2 to ubi0
UBI: MTD device name: "mtd=0"
UBI: MTD device size: 128 MiB
UBI: number of good PEBs: 1022
UBI: number of bad PEBs: 2
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 6
UBI: available PEBs: 30
UBI: total number of reserved PEBs: 992
UBI: number of PEBs reserved for bad PEB handling: 10
UBI: max/mean erase counter: 21/8
UBI: image sequence number: 1942820806
UBI: vol_id reserved_pebs alignment data_pad vol_type usable_leb_size used_ebs used_bytes last_eb_bytes corrupted upd_marker name_len name
UBI: 0 3 1 0 dynamic 1f000 3 5d000 1f000 0 0 5 nvram
UBI: 1 1 1 0 dynamic 1f000 1 1f000 1f000 0 0 7 Factory
UBI: 2 1 1 0 dynamic 1f000 1 1f000 1f000 0 0 8 Factory2
UBI: 3 18d 1 0 dynamic 1f000 18d 3013000 1f000 0 0 5 linux
UBI: 4 18d 1 0 dynamic 1f000 18d 3013000 1f000 0 0 6 linux2
UBI: 5 b3 1 0 dynamic 1f000 b3 15ad000 1f000 0 0 5 jffs2
UBI: 7fffefff 2 1 0 dynamic 1f000 2 3e000 2 0 0 d layout volume
Read 0x1f000 bytes from volume [Factory] offset 0x0 to 86ec0ce0
EEPROM set 0: OK (version 17)
Read 0x1f000 bytes from volume [Factory2] offset 0x0 to 86ec0ce0
EEPROM set 1: OK (version 17)
Read 0x1f000 bytes from volume [Factory] offset 0x0 to 86ee2f50
Select EEPROM set 0 at offset 0x0.
Please choose the operation:
1: Load System code to SDRAM via TFTP.
2: Load System code then write to Flash via TFTP.
3: Boot System code via Flash (default).
4: Entr boot command line interface.
7: Load Boot Loader code then write to Flash via Serial.
9: Load Boot Loader code then write to Flash via TFTP. 0
3: Boot System code via Flash (default).
MAP-AC1300 bootloader version: 1.0.0.5
MAC Address: 2C:FD:A1:8D:80:B8
Read 0x40 bytes from volume [linux] offset 0x0 to 84000000
FIT/FDT format image found at 0x84000000, size 0x00680d9c
Read 0x680ddc bytes from volume [linux] offset 0x0 to 84000000
## Booting kernel from FIT Image at 84000000 ...
Using 'config@1' configuration
Trying 'kernel-1' kernel subimage
Description: ARM OpenWrt Linux-5.15.125
Type: Kernel Image
Compression: lzma compressed
Data Start: 0x840000e4
Data Size: 6799174 Bytes = 6.5 MiB
Architecture: ARM
OS: Linux
Load Address: 0x80208000
Entry Point: 0x80208000
Hash algo: crc32
Hash value: 9ff35b21
Hash algo: sha1
Hash value: b5218dde075487c4872447565c9511a346a0fccc
## Flattened Device Tree from FIT Image at 84000000
Using 'config@1' configuration
Trying 'fdt-1' FDT blob subimage
Description: ARM OpenWrt asus_map-ac1300 device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x8467c168
Data Size: 18225 Bytes = 17.8 KiB
Architecture: ARM
Hash algo: crc32
Hash value: 2287e8c0
Hash algo: sha1
Hash value: 7f4c77c9b3aa724c6bafde9120eb33e36805068e
Booting using the fdt blob at 0x8467c168
Read 0x28 bytes from volume [linux2] offset 0x0 to 86edfc38
Uncompressing Kernel Image ... OK
Loading Device Tree to 86ed8000, end 86edf730 ... OK
ipq: fdt fixup unable to find compatible node
Using machid 0x8010100 from environment
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.15.125 (ubuntu@ubuntu2004) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 12.3.0 r0+23715-7b9f74a663) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Fri Aug 11 14:23:14 2023
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: ASUS Lyra Mini
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000080000000-0x000000008fffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x0000000087dfffff]
[ 0.000000] node 0: [mem 0x0000000087e00000-0x0000000087ffffff]
[ 0.000000] node 0: [mem 0x0000000088000000-0x000000008fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000008fffffff]
[ 0.000000] percpu: Embedded 11 pages/cpu s16268 r8192 d20596 u45056
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
[ 0.000000] Kernel command line: root_rfs=0x00000000 flash_type=norplusnand
[ 0.000000] Unknown kernel command line parameters "root_rfs=0x00000000 flash_type=norplusnand", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 233920K/262144K available (6518K kernel code, 607K rwdata, 1664K rodata, 13312K init, 236K bss, 28224K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns
[ 0.000001] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns
[ 0.000025] Switching to timer-based delay loop, resolution 20ns
[ 0.000310] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
[ 0.000341] CPU: Testing write buffer coherency: ok
[ 0.000396] pid_max: default: 32768 minimum: 301
[ 0.001244] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.001274] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.003271] qcom_scm: convention: smc legacy
[ 0.004505] Setting up static identity map for 0x80300000 - 0x8030003c
[ 0.004679] rcu: Hierarchical SRCU implementation.
[ 0.005287] smp: Bringing up secondary CPUs ...
[ 0.008814] smp: Brought up 1 node, 4 CPUs
[ 0.008852] SMP: Total of 4 processors activated (384.00 BogoMIPS).
[ 0.008869] CPU: All CPU(s) started in SVC mode.
[ 0.015339] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.015506] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.015542] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.015925] pinctrl core: initialized pinctrl subsystem
[ 0.017954] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.018350] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.019683] thermal_sys: Registered thermal governor 'step_wise'
[ 0.020185] cpuidle: using governor ladder
[ 0.020253] cpuidle: using governor menu
[ 0.047655] cryptd: max_cpu_qlen set to 1000
[ 0.052378] usbcore: registered new interface driver usbfs
[ 0.052456] usbcore: registered new interface driver hub
[ 0.052518] usbcore: registered new device driver usb
[ 0.052577] pps_core: LinuxPPS API ver. 1 registered
[ 0.052590] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.052647] PTP clock support registered
[ 0.054864] clocksource: Switched to clocksource arch_sys_counter
[ 0.056102] NET: Registered PF_INET protocol family
[ 0.056342] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.057164] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.057217] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.057241] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.057282] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.057338] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.057486] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.057536] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.057956] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.058031] PCI: CLS 0 bytes, default 64
[ 0.060672] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[ 0.066846] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.066886] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.200753] bam-dma-engine 8e04000.dma: num-channels unspecified in dt
[ 0.200790] bam-dma-engine 8e04000.dma: num-ees unspecified in dt
[ 0.201498] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
[ 0.201606] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
[ 0.201700] tcsr 1953000.ess_tcsr: setting ess interface select = 0
[ 0.201793] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
[ 0.202141] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.202809] msm_serial 78af000.serial: msm_serial: detected port #0
[ 0.202862] msm_serial 78af000.serial: uartclk = 1843200
[ 0.202918] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 34, base_baud = 115200) is a MSM
[ 0.202955] msm_serial: console setup on port #0
[ 0.755152] printk: console [ttyMSM0] enabled
[ 0.760260] msm_serial: driver initialized
[ 0.770228] loop: module loaded
[ 0.771343] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 0.773245] spi-nor spi0.0: mx25l1606e (2048 Kbytes)
[ 0.779608] 8 fixed-partitions partitions found on MTD device spi0.0
[ 0.784436] Creating 8 MTD partitions on "spi0.0":
[ 0.790789] 0x000000000000-0x000000040000 : "SBL1"
[ 0.795990] 0x000000040000-0x000000060000 : "MIBIB"
[ 0.800704] 0x000000060000-0x0000000c0000 : "QSEE"
[ 0.805557] 0x0000000c0000-0x0000000d0000 : "CDT"
[ 0.810332] 0x0000000d0000-0x0000000e0000 : "DDRPARAMS"
[ 0.815144] 0x0000000e0000-0x0000000f0000 : "APPSBLENV"
[ 0.820200] 0x0000000f0000-0x000000170000 : "APPSBL"
[ 0.825401] 0x000000170000-0x000000180000 : "ART"
[ 1.234225] spi-nand: probe of spi0.1 failed with error -110
[ 1.314394] ipqess-edma c080000.ethernet: generated random MAC address de:16:0a:74:f6:8c
[ 1.338810] i2c_dev: i2c /dev entries driver
[ 1.339090] i2c_qup 78b7000.i2c: using default clock-frequency 100000
[ 1.344986] sdhci: Secure Digital Host Controller Interface driver
[ 1.348499] sdhci: Copyright(c) Pierre Ossman
[ 1.354571] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.448414] lp5523x 0-0032: lp5523 Programmable led chip found
[ 1.464732] NET: Registered PF_INET6 protocol family
[ 1.467712] Segment Routing with IPv6
[ 1.468866] In-situ OAM (IOAM) with IPv6
[ 1.472504] NET: Registered PF_PACKET protocol family
[ 1.476740] 8021q: 802.1Q VLAN Support v1.8
[ 1.481427] Registering SWP/SWPB emulation handler
[ 1.519861] qca8k-ipq4019 c000000.switch: configuring for fixed/internal link mode
[ 1.520194] qca8k-ipq4019 c000000.switch: Link is Up - 1Gbps/Full - flow control rx/tx
[ 1.609873] qca8k-ipq4019 c000000.switch lan1 (uninitialized): PHY [90000.mdio-1:00] driver [Qualcomm QCA8072] (irq=POLL)
[ 1.699404] qca8k-ipq4019 c000000.switch lan2 (uninitialized): PHY [90000.mdio-1:01] driver [Qualcomm QCA8072] (irq=POLL)
[ 1.710560] DSA: tree 0 setup
[ 1.741446] Freeing unused kernel image (initmem) memory: 13312K
[ 1.765121] Run /init as init process
[ 2.167266] init: Console is alive
[ 2.167617] init: - watchdog -
[ 2.179567] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.314581] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.314665] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 2.319326] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x0000000002010010
[ 2.326671] xhci-hcd xhci-hcd.0.auto: irq 103, io mem 0x08a00000
[ 2.336179] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 2.342177] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 2.347492] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 2.355910] hub 1-0:1.0: USB hub found
[ 2.361658] hub 1-0:1.0: 1 port detected
[ 2.365849] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.369988] hub 2-0:1.0: USB hub found
[ 2.377608] hub 2-0:1.0: 1 port detected
[ 2.383083] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.387554] init: - preinit -
[ 2.662324] random: jshn: uninitialized urandom read (4 bytes read)
[ 2.725504] random: jshn: uninitialized urandom read (4 bytes read)
[ 2.849498] random: jshn: uninitialized urandom read (4 bytes read)
ip: SIOCGIFFLAGS: No such device
ip: can't find device 'lan'
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
sendto(): Network unreachable
sendto(): Network unreachable
ip: can't find device 'lan'
ip: SIOCGIFFLAGS: No such device
[ 5.408304] procd: - early -
[ 5.408577] procd: - watchdog -
[ 5.952890] procd: - watchdog -
[ 5.958088] procd: - ubus -
[ 5.982408] random: ubusd: uninitialized urandom read (4 bytes read)
[ 6.010706] random: ubusd: uninitialized urandom read (4 bytes read)
[ 6.011596] random: ubusd: uninitialized urandom read (4 bytes read)
[ 6.023834] procd: - init -
Please press Enter to activate this console.
[ 6.446985] kmodloader: loading kernel modules from /etc/modules.d/*
[ 6.457148] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b
[ 6.457202] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36
[ 6.566315] PPP generic driver version 2.4.2
[ 6.567509] NET: Registered PF_PPPOX protocol family
[ 7.266033] urngd: v1.0.2 started.
[ 7.426967] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[ 7.427042] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 7.438956] ath10k_ahb a000000.wifi: firmware ver 10.4b-ct-4019-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 6b2b5c5b
[ 7.476859] ath10k_ahb a000000.wifi: failed to fetch board data for bus=ahb,vendor=0000,device=0000,subsystem-vendor=0000,subsystem-device=0000,variant=MAP-AC1300 from ath10k/QCA4019/hw1.0/board-2.bin
[ 7.649546] ath10k_ahb a000000.wifi: failed to fetch board-2.bin or board.bin from ath10k/QCA4019/hw1.0
[ 7.649611] ath10k_ahb a000000.wifi: failed to fetch board file: -12
[ 7.657983] ath10k_ahb a000000.wifi: could not probe fw (-12)
[ 7.814730] random: crng init done
[ 7.814778] random: 30 urandom warning(s) missed due to ratelimiting
[ 8.708794] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[ 8.708884] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 8.722209] ath10k_ahb a800000.wifi: firmware ver 10.4b-ct-4019-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 6b2b5c5b
[ 8.753885] ath10k_ahb a800000.wifi: failed to fetch board data for bus=ahb,vendor=0000,device=0000,subsystem-vendor=0000,subsystem-device=0000,variant=MAP-AC1300 from ath10k/QCA4019/hw1.0/board-2.bin
[ 8.971682] ath10k_ahb a800000.wifi: failed to fetch board-2.bin or board.bin from ath10k/QCA4019/hw1.0
[ 8.971749] ath10k_ahb a800000.wifi: failed to fetch board file: -12
[ 8.980281] ath10k_ahb a800000.wifi: could not probe fw (-12)
[ 8.995713] kmodloader: done loading kernel modules from /etc/modules.d/*
BusyBox v1.36.1 (2023-08-11 14:23:14 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r0+23715-7b9f74a663
-----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@OpenWrt:/#