HI all,
Bootlog attached for AP303 now running Openwrt, this is currently missing from https://openwrt.org/toh/aruba/ap-303
If someone can add to the main page please, If you let me know who, I can also supply images
Begin:
APBoot 2.4.1.10 (build 65756)
Built: 2018-07-11 at 21:04:12
Model: AP-303
DRAM: 512 MiB
Flash: Detected MX25R3235F: with write protection total 4 MiB
NAND: 128 MiB
Power: POE
Net: eth0
Radio: ipq4019#0, ipq4019#1
FIPS: passed
Hit <Enter> to stop autoboot: 0
No size specified -> Using max size (3047424)
Uncompressing Kernel Image ... OK
ipq: fdt fixup unable to find compatible node
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.10.176 (builder@buildhost) (arm-openwrt-linux-mus lgnueabi-gcc (OpenWrt GCC 11.2.0 r20134-5f15225c1e) 11.2.0, GNU ld (GNU Binutils ) 2.37) #0 SMP Thu Apr 27 20:28:15 2023
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio n cache
[ 0.000000] OF: fdt: Machine model: Aruba AP-303
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000080000000-0x000000009fffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x0000000087dfffff]
[ 0.000000] node 0: [mem 0x0000000087e00000-0x0000000087ffffff]
[ 0.000000] node 0: [mem 0x0000000088000000-0x000000009fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff]
[ 0.000000] percpu: Embedded 15 pages/cpu s31116 r8192 d22132 u61440
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920
[ 0.000000] Kernel command line: console=ttyMSM1,9600n8
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, l inear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, li near)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 506824K/524288K available (6479K kernel code, 608K rwdata , 956K rodata, 1024K init, 246K bss, 17464K reserved, 0K cma-reserved, 0K highme m)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif fies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns
[ 0.000009] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 43980 46511096ns
[ 0.000027] Switching to timer-based delay loop, resolution 20ns
[ 0.000347] Calibrating delay loop (skipped), value calculated using timer fr equency.. 96.00 BogoMIPS (lpj=480000)
[ 0.000374] pid_max: default: 32768 minimum: 301
[ 0.000562] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linea r)
[ 0.000585] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.001657] CPU: Testing write buffer coherency: ok
[ 0.002057] qcom_scm: convention: smc legacy
[ 0.003065] Setting up static identity map for 0x80300000 - 0x8030003c
[ 0.003245] rcu: Hierarchical SRCU implementation.
[ 0.003533] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[ 0.003908] smp: Bringing up secondary CPUs ...
[ 0.007612] smp: Brought up 1 node, 4 CPUs
[ 0.007636] SMP: Total of 4 processors activated (384.00 BogoMIPS).
[ 0.007647] CPU: All CPU(s) started in SVC mode.
[ 0.013485] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.013676] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns
[ 0.013706] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.013992] pinctrl core: initialized pinctrl subsystem
[ 0.015856] NET: Registered protocol family 16
[ 0.016208] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.017434] thermal_sys: Registered thermal governor 'step_wise'
[ 0.017892] cpuidle: using governor ladder
[ 0.017954] cpuidle: using governor menu
[ 0.035938] gpio-454 (PHY-reset): hogged as output/high
[ 0.044679] cryptd: max_cpu_qlen set to 1000
[ 0.049208] usbcore: registered new interface driver usbfs
[ 0.049284] usbcore: registered new interface driver hub
[ 0.049347] usbcore: registered new device driver usb
[ 0.049401] pps_core: LinuxPPS API ver. 1 registered
[ 0.049414] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti <giometti@linux.it>
[ 0.049443] PTP clock support registered
[ 0.051483] clocksource: Switched to clocksource arch_sys_counter
[ 0.052517] NET: Registered protocol family 2
[ 0.052782] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear )
[ 0.053927] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.053995] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.054058] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.054147] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.054282] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.054325] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.054612] NET: Registered protocol family 1
[ 0.054663] PCI: CLS 0 bytes, default 64
[ 0.057183] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 0.062226] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.062254] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT Y) (c) 2001-2006 Red Hat, Inc.
[ 0.192185] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 48)
[ 0.195222] bam-dma-engine 8e04000.dma: num-channels unspecified in dt
[ 0.195248] bam-dma-engine 8e04000.dma: num-ees unspecified in dt
[ 0.196705] tcsr 1953000.ess_tcsr: setting ess interface select = 1
[ 0.196813] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
[ 0.196909] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
[ 0.197240] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.199160] msm_serial 78af000.serial: msm_serial: detected port #0
[ 0.199211] msm_serial 78af000.serial: uartclk = 1843200
[ 0.199272] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 34, base_baud = 115200) is a MSM
[ 0.199804] msm_serial 78b0000.serial: msm_serial: detected port #1
[ 0.199846] msm_serial 78b0000.serial: uartclk = 1843200
[ 0.199896] 78b0000.serial: ttyMSM1 at MMIO 0x78b0000 (irq = 35, base_baud = 115200) is a MSM
[ 0.199927] msm_serial: console setup on port #1
[ 6.934428] printk: console [ttyMSM1] enabled
[ 6.991219] msm_serial: driver initialized
[ 7.047104] loop: module loaded
[ 7.091518] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
[ 7.126096] nand: Macronix MX30LF1G18AC
[ 7.205245] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB siz e: 64
[ 7.247976] Block protection check failed
[ 7.339674] 3 fixed-partitions partitions found on MTD device qcom_nand.0
[ 7.388599] Creating 3 MTD partitions on "qcom_nand.0":
[ 7.469834] 0x000000000000-0x000002000000 : "aos0"
[ 7.579083] 0x000002000000-0x000004000000 : "ubi"
[ 7.637330] 0x000004000000-0x000008000000 : "aruba-ubifs"
[ 7.744733] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 7.753857] spi-nor spi0.0: mx25r3235f (4096 Kbytes)
[ 7.817804] 15 fixed-partitions partitions found on MTD device spi0.0
[ 7.877155] OF: Bad cell count for /soc/spi@78b5000/flash@0/partitions
[ 7.953162] OF: Bad cell count for /soc/spi@78b5000/flash@0/partitions
[ 8.030855] OF: Bad cell count for /soc/spi@78b5000/flash@0/partitions
[ 8.108392] OF: Bad cell count for /soc/spi@78b5000/flash@0/partitions
[ 8.187036] Creating 15 MTD partitions on "spi0.0":
[ 8.264610] 0x000000000000-0x000000040000 : "sbl1"
[ 8.322625] 0x000000040000-0x000000060000 : "mibib"
[ 8.380944] 0x000000060000-0x0000000c0000 : "qsee"
[ 8.438149] 0x0000000c0000-0x0000000d0000 : "cdt"
[ 8.496403] 0x0000000d0000-0x0000000e0000 : "ddrparams"
[ 8.553681] 0x0000000e0000-0x0000000f0000 : "ART"
[ 8.614130] 0x0000000f0000-0x0000001e0000 : "appsbl"
[ 8.672478] 0x0000001e0000-0x0000001f0000 : "mfginfo"
[ 8.733016] 0x0000001f0000-0x000000200000 : "apcd"
[ 8.792332] 0x000000200000-0x000000380000 : "osss"
[ 8.848503] 0x000000380000-0x000000390000 : "appsblenv"
[ 8.905791] 0x000000390000-0x0000003a0000 : "pds"
[ 8.967193] 0x0000003a0000-0x0000003b0000 : "fcache"
[ 9.025608] 0x0000003b0000-0x0000003c0000 : "u-boot-env-bak"
[ 9.085967] 0x0000003f0000-0x000000400000 : "u-boot-env"
[ 9.392164] i2c /dev entries driver
[ 9.392440] i2c_qup 78b7000.i2c: using default clock-frequency 100000
[ 9.422297] sdhci: Secure Digital Host Controller Interface driver
[ 9.498527] sdhci: Copyright(c) Pierre Ossman
[ 9.571434] sdhci-pltfm: SDHCI platform and OF driver helper
[ 9.628674] NET: Registered protocol family 10
[ 9.694804] Segment Routing with IPv6
[ 9.744463] NET: Registered protocol family 17
[ 9.789186] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 9.841221] 8021q: 802.1Q VLAN Support v1.8
[ 9.998571] Registering SWP/SWPB emulation handler
[ 10.057786] UBI: auto-attach mtd1
[ 10.103730] ubi0: attaching mtd1
[ 10.579460] ubi0: scanning is finished
[ 10.598687] ubi0 warning: 0xc06f920c: cannot reserve enough PEBs for bad PEB handling, reserved 8, need 20
[ 10.613327] ubi0: attached mtd1 (name "ubi", size 32 MiB)
[ 10.726477] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 10.792054] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 10.873311] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 10.955592] ubi0: good PEBs: 256, bad PEBs: 0, corrupted PEBs: 0
[ 11.036858] ubi0: user volume: 4, internal volumes: 1, max. volumes count: 12 8
[ 11.111844] ubi0: max/mean erase counter: 9/2, WL threshold: 4096, image sequ ence number: 2019240267
[ 11.196228] ubi0: available PEBs: 0, total reserved PEBs: 256, PEBs reserved for bad PEB handling: 8
[ 11.307706] ubi0: background thread "ubi_bgt0d" started, PID 121
[ 11.418026] block ubiblock0_1: created from ubi0▒[ 11.560223] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 11.562320] Freeing unused kernel memory: 1024K
[ 11.651740] Run /sbin/init as init process
[ 12.789765] init: Console is alive
[ 12.790087] init: - watchdog -
[ 13.838301] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 13.956991] genirq: irq_chip msmgpio did not update eff. affinity mask of irq 103
[ 13.967658] kmodloader: done loading kernel modules from /etc/modules-boot.d/ *
[ 14.035566] init: - preinit -
[ 15.043789] ess_edma c080000.edma eth0: Link is Down
[ 15.074344] random: procd: uninitialized urandom read (4 bytes read)
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 19.192909] ess_edma c080000.edma eth0: Link is Up - 1Gbps/Full - flow contro l rx/tx
[ 19.193917] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.346900] UBIFS (ubi0:2): Mounting in unauthenticated mode
[ 19.347161] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 183
[ 19.505020] UBIFS (ubi0:2): recovery needed
[ 19.754242] UBIFS (ubi0:2): recovery completed
[ 19.754675] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "root fs_data"
[ 19.793957] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O u nit sizes: 2048 bytes/2048 bytes
[ 19.888727] UBIFS (ubi0:2): FS size: 21078016 bytes (20 MiB, 166 LEBs), journ al size 1015809 bytes (0 MiB, 8 LEBs)
[ 20.007490] UBIFS (ubi0:2): reserved for root: 995566 bytes (972 KiB)
[ 20.130409] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID B025B A74-A4FC-4887-903D-6CEECBED8AC4, small LPT model
[ 20.212281] mount_root: switching to ubifs overlay
[ 20.359105] urandom-seed: Seeding with /etc/urandom.seed
[ 20.600254] ess_edma c080000.edma eth0: Link is Down
[ 20.619726] procd: - early -
[ 20.648895] procd: - watchdog -
[ 21.309461] procd: - watchdog -
[ 21.594421] procd: - ubus -
[ 21.935594] random: ubusd: uninitialized urandom read (4 bytes read)
[ 21.947386] random: ubusd: uninitialized urandom read (4 bytes read)
[ 22.000809] random: ubusd: uninitialized urandom read (4 bytes read)
[ 22.081715] procd: - init -
Please press Enter to activate this console.
[ 22.956609] random: ubusd: uninitialized urandom read (4 bytes read)
[ 22.956896] random: ubus: uninitialized urandom read (4 bytes read)
[ 23.131084] random: jshn: uninitialized urandom read (4 bytes read)
[ 23.171046] kmodloader: loading kernel modules from /etc/modules.d/*
[ 23.276090] urngd: v1.0.2 started.
[ 23.300122] Loading modules backported from Linux version v5.15.92-0-ge515b99 02f5f
[ 23.309311] Backport generated by backports.git v5.15.92-1-0-gdfe0f60c
[ 23.358694] random: crng init done
[ 23.462379] PPP generic driver version 2.4.2
[ 23.478105] random: 20 urandom warning(s) missed due to ratelimiting
[ 23.519861] NET: Registered protocol family 24
[ 25.323487] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[ 25.323545] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 25.425302] ath10k_ahb a000000.wifi: firmware ver 10.4b-ct-4019-fW-13-5ae337b b1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regd ump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc -CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 6 b2b5c5b
[ 25.643819] ath10k_ahb a000000.wifi: Loading BDF type 0
[ 25.863851] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:20 crc32 d2e9d 359
[ 27.215830] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 27.215900] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
[ 27.335771] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 27.361846] ath10k_ahb a000000.wifi: wmi print 'free: 53252 iram: 13432 sram: 35752'
[ 27.666754] ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-nvmem max-sta 32 raw 0 hwcrypto 1
[ 29.512453] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[ 29.512519] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 29.614258] ath10k_ahb a800000.wifi: firmware ver 10.4b-ct-4019-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 6b2b5c5b
[ 29.831588] ath10k_ahb a800000.wifi: Loading BDF type 0
[ 30.052359] ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:21 crc32 d2e9d359
[ 31.404577] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 31.404632] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
[ 31.524406] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 31.551269] ath10k_ahb a800000.wifi: wmi print 'free: 53252 iram: 13432 sram: 35752'
[ 31.816276] ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-nvmem max-sta 32 raw 0 hwcrypto 1
[ 31.988506] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 39.802619] br-lan: port 1(eth0) entered blocking state
[ 39.802677] br-lan: port 1(eth0) entered disabled state
[ 39.851196] device eth0 entered promiscuous mode
[ 42.407776] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 42.407838] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
[ 42.527448] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 42.553793] ath10k_ahb a800000.wifi: wmi print 'free: 53252 iram: 13432 sram: 35752'
[ 43.000441] ath10k_ahb a800000.wifi: rts threshold -1
[ 43.004474] ath10k_ahb a800000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 43.031815] ess_edma c080000.edma eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 43.180153] br-lan: port 1(eth0) entered blocking state
[ 43.274630] br-lan: port 1(eth0) entered forwarding state
[ 43.334463] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 43.401172] br-lan: port 2(wlan1) entered blocking state
[ 43.406032] ath10k_ahb a800000.wifi: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
[ 43.477793] br-lan: port 2(wlan1) entered disabled state
[ 43.652156] device wlan1 entered promiscuous mode
[ 45.195928] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 45.195986] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
[ 45.316750] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 45.342216] ath10k_ahb a000000.wifi: wmi print 'free: 53252 iram: 13432 sram: 35752'
[ 45.837361] ath10k_ahb a000000.wifi: rts threshold -1
[ 45.842398] ath10k_ahb a000000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 45.889162] br-lan: port 3(wlan0) entered blocking state
[ 46.017124] br-lan: port 3(wlan0) entered disabled state
[ 46.082840] device wlan0 entered promiscuous mode
[ 48.263684] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 48.264205] br-lan: port 3(wlan0) entered blocking state
[ 48.328581] br-lan: port 3(wlan0) entered forwarding state
[ 52.645008] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 52.645364] br-lan: port 2(wlan1) entered blocking state
[ 52.709835] br-lan: port 2(wlan1) entered forwarding state
BusyBox v1.35.0 (2023-04-27 20:28:15 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt 22.03.5, r20134-5f15225c1e
-----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@OpenWrt:/#