Archer C7 vs Newifi3 D2

Hardware Questions and Recommendations
3

Does anybody know about e-shop which is selling Newifi d2 with cheap EU shipping?

4

overclock C7 and enable flow offload. in my test reached 940Mbps of NAT traffic

5

Is there an English breed for overclocking?

6

i don't think there is. use @pepe2k's u-boot_mod or stock u-boot

7

I have a Newifi d2 and really don't like it, FWIW. The MT76 open source driver is a mess right now. I have bluetooth interference issues with the 2.4 GHz radio even with a 20Mhz channel. The 5Ghz radio bombs out occasionally for no reason. I've tried all sort of different Openwrt releases from the 18 series to the 19 series with not much luck. It works, but poorly, right now.

1 Like
8

Pepe uboot can work on archer c7 v2? Need compile myself right? Thx

9

i got report from @kamil445 that it works on v2. i have v1 only so never confirmed that myself

10

Thx. I checked the pre built binaries and couldn't find the version for c7..... Need to wait till I have time to set up a build env... Thx!

http://projects.dymacz.pl/?dir=u-boot_mod

11

any chance you still have the built uboot on hand? busy to set up build env... thx

12

nope. my drive crashed.

1 Like
13

thanks sir

hope @pepe2k will merge your codes soon and build on his raspberry server

thx!

14

When you say the mt76 driver is garbage you're talking about these open bugs? https://github.com/openwrt/mt76/issues?page=1&q=is%3Aissue+is%3Aopen

I gave my gf my old mt76 router as I found it flawless for my use during the 18 release and she hasn't complained about anything not working well.

15

Well, maybe I'm mistaken about the mt76 driver then? I've had serious issues with wireless performance on all 18 and 19 series releases that I've tried for the Newifi D2. Maybe it is something else to do with my specific device?

16

The problem with Ralink/Mediatek devices is the poorly calibrated EEPROM on many devices.
On my Newifi D2 I tried changing the factory partition which contains the EEPROM, wireless performance immediately went up without even needing to change the wireless signal strength.
Atheros devices are better in that aspect as the ART partition that comes in many units are pretty okay.

1 Like
17

@gwlim
Could you share your change?

18

Try at your own risk

1 Like
19

I'm willing to try it as my Newifi D2 is just collecting dust. Can someone advise the command to use to flash the EEPROM?

20

May I ask where you got the calibrated EEPROM? Would like to compare it to the dir860l and mir3g EEPROM.

21

Please use this topic only for hardware recommendations.
For questions regarding installation, please open a new topic.

Thanks!

22

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.