Hi, stumbled over that bootmessages. Got an Archer c7 from 2013. Looks like 5Ghz is working, but shown as 6Mbit Device. Is that working as expected?
Did not change anything. Im on
"Linux Archer-Lede 4.4.30 #0 Fri Nov 4 10:38:19 2016 mips GNU/Linux
"
root@Archer-Lede:~# dmesg | grep ath10k
[ 10.339609] ath10k_pci 0000:01:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[ 10.608579] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[ 10.619480] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 10.797449] firmware ath10k!pre-cal-pci-0000:01:00.0.bin: firmware_loading_store: map pages failed
[ 11.870041] ath10k_pci 0000:01:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[ 11.879443] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
[ 11.892470] ath10k_pci 0000:01:00.0: firmware ver 10.2.4.70.54 api 5 features no-p2p,raw-mode,mfp crc32 9d340dd9
[ 11.902904] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
[ 11.913503] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 12.036703] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
[ 12.053375] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 14.038166] ath10k_pci 0000:01:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1