Archer C20 v4 - Factory Reset

[juppin]

Do you have access over serial?
Seems your product id and hw id is also corrupted (is read from the tp link header of you firmware).

Here is a thread with a similar tftp recovery issue:

Can't get my archer c7 unbricked.. been trying all weekend

Here is what it outputs when i start it: https://imgur.com/a/aSyYNok After using an auto typer to get the tpl command entered I can't type because of what is on the screen. https://imgur.com/a/UrduF8f And the log: SGMII in forced mode athr_gmac_sgmii_setup SGMII done : cfg1 0x800c0000 cfg2 0x7214 eth1: ba:be:fa:ce:08:41 eth1 up eth0, eth1 Setting 0x18116290 to 0x58b1214f dup 1 speed 1000 Using eth1 device TFTP from server 192.168.0.66; our IP address is 192.168.0.86 Filename 'ArcherC7v2_tp_re…