From where i get the result ? I can access to the 192.168.1.1
Ipconfig do i need to open command prompt in laptop?
yes you do
What's what the dummies link told you.
Again, start reading the info you've been given.
Are you trying to make this work or not?
Bro am do the best if i know i will do it really but i don't
You do know, you pm'ed me asking what command prompt was and then you asked if you needed to open command prompt on the laptop then you FORGOT WHAT TO DO????
I give up, have fun beeing the baby bird feeder, @LilRedDog.
1 Like
One more intentionally obtuse reply and I'm out too.
1 Like
Wow, had to google that one, guess I learned something new in this thread too, surprise(d).
3 Likes
and this is one of the reasons why I don’t recommend going directly from QWRT, even tho it is based on openwrt/qsdk.
As long as it doesn’t have an official build from OpenWRT itself, won’t go flashing random snapshot images.
As for me, I build my own images, with my own custom defaults, but that takes much effort, and while I do share my images in other platforms than this forum, I don’t like giving them out to people who don’t have the means (yet) to recover their routers (i.e. having usb ttl, soldering/clipping wires to the serial ports, etc)
Yes, you can flash the 'sysupgrade' directly using the QWRT interface, you don't need to open up the case. I can confirm that it works fine
I think it's simple 
as much as I want to help you, given how you are selectively reading this thread, the steps to recover your router/modem is already posted way above in this thread. that requires a few thing tho and opening the case.
Thanks for that bro 
If it has been successfully flashed, check whether there is normal DHCP on the local network connection. If an IP address appears, it is successful. At this point you should access via SSH, connect the WAN port to the Internet, and write to luci web
1.opkg update
2.opkg install luci
3./etc/init.d/uhttpd enable
4./etc/init.d/uhttpd start
The firmware is not embedded with luci, which will cause the illusion of "unusable"
2 Likes
Im having a error upgrading the sysupgrade can someone please help.
This is from the uart after i do the last command which is sysupgrade -n /tmp/sysupgrade.bin
Watchdog handover: fd=3
- watchdog -
Watchdog did not previously reset the system
Thu Jan 1 00:08:00 UTC 1970 upgrade: Sending TERM to remaining processes ...
Thu Jan 1 00:08:00 UTC 1970 upgrade: Sending signal TERM to netifd (1967)
Thu Jan 1 00:08:04 UTC 1970 upgrade: Sending KILL to remaining processes ...
Thu Jan 1 00:08:04 UTC 1970 upgrade: Sending signal KILL to netifd (1967)
[ 492.742199] stage2 (3113): drop_caches: 3
Thu Jan 1 00:08:12 UTC 1970 upgrade: Switching to ramdisk...
Thu Jan 1 00:08:13 UTC 1970 upgrade: Performing system upgrade...
verifying sysupgrade tar file integrity
[ 494.286560] ubi0: attaching mtd18
[ 494.688823] ubi0: scanning is finished
[ 494.695370] ubi0: attached mtd18 (name "rootfs", size 100 MiB)
[ 494.695411] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
[ 494.700119] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
[ 494.706962] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192
[ 494.713828] ubi0: good PEBs: 400, bad PEBs: 0, corrupted PEBs: 0
[ 494.720599] ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128
[ 494.726841] ubi0: max/mean erase counter: 154/41, WL threshold: 4096, image sequence number: 708906475
[ 494.733890] ubi0: available PEBs: 0, total reserved PEBs: 400, PEBs reserved for bad PEB handling: 80
[ 494.743182] ubi0: background thread "ubi_bgt0d" started, PID 3918
[ 494.752975] block ubiblock0_2: created from ubi0:2(rootfs)
UBI device number 0, total 400 LEBs (101580800 bytes, 96.8 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB)
[ 494.848244] ------------[ cut here ]------------
[ 494.848278] sysfs group 'power' not found for kobject 'ubiblock0_2'
[ 494.852049] WARNING: CPU: 3 PID: 3956 at fs/sysfs/group.c:282 sysfs_remove_group+0x94/0xa0
[ 494.857923] Modules linked in: pppoe ppp_async nft_fib_inet nf_flow_table_inet ath11k_ahb(O) ath11k(O) pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mac80211(O) cfg80211(O) slhc qrtr_smd qrtr qmi_helpers(O) nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c compat(O) sha512_generic sha512_arm64 seqiv sha3_generic jitterentropy_rng drbg michael_mic hmac geniv cmac leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom qca_nss_dp(O) qca_ssdk(O) gpio_button_hotplug(O) ext4 mbcache jbd2 aquantia hwmon crc_ccitt crc32c_generic
[ 494.913376] CPU: 3 PID: 3956 Comm: ubirmvol Tainted: G O 6.6.27 #0
[ 494.935614] Hardware name: Arcadyan AW1000 (DT)
[ 494.943160] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 494.947591] pc : sysfs_remove_group+0x94/0xa0
[ 494.954531] lr : sysfs_remove_group+0x94/0xa0
[ 494.959045] sp : ffffffc0875db960
[ 494.963382] x29: ffffffc0875db960 x28: ffffff8003b58c00 x27: ffffff8003f92730
[ 494.966689] x26: 000000000000001c x25: ffffff80041d8000 x24: 0000000000000000
[ 494.973807] x23: ffffffc081348000 x22: ffffffc081348a98 x21: ffffff800375d4c8
[ 494.980924] x20: ffffffc08088c850 x19: 0000000000000000 x18: 0000000000000136
[ 494.988044] x17: 0000000000000004 x16: ffffff8003224080 x15: ffffffc081356da0
[ 494.995161] x14: 00000000000003a2 x13: 0000000000000136 x12: 00000000ffffffea
[ 495.002279] x11: 00000000ffffefff x10: ffffffc0813aeda0 x9 : ffffffc081356d48
[ 495.009397] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[ 495.016516] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc0875db760
[ 495.023632] x2 : ffffffc081356ce0 x1 : ffffffc081356ce0 x0 : 0000000000000037
[ 495.030752] Call trace:
[ 495.037860] sysfs_remove_group+0x94/0xa0
[ 495.040120] dpm_sysfs_remove+0x5c/0x6c
[ 495.044285] device_del+0x9c/0x420
[ 495.047931] del_gendisk+0x1d0/0x328
[ 495.051404] ubiblock_remove+0xac/0x14c
[ 495.055137] ubiblock_notify+0x64/0x274
[ 495.058696] blocking_notifier_call_chain+0x6c/0xa0
[ 495.062517] ubi_volume_notify+0x4c/0x60
[ 495.067377] ubi_remove_volume+0x218/0x33c
[ 495.071544] ubi_cdev_ioctl+0x440/0xb34
[ 495.075450] __arm64_sys_ioctl+0x1f0/0xe44
[ 495.079182] invoke_syscall.constprop.0+0x5c/0x108
[ 495.083351] do_el0_svc+0x40/0xc8
[ 495.088122] el0_svc+0x30/0xb8
[ 495.091507] el0t_64_sync_handler+0x120/0x12c
[ 495.094462] el0t_64_sync+0x178/0x17c
[ 495.098886] ---[ end trace 0000000000000000 ]---
[ 495.149561] block ubiblock0_2: released
Volume ID 0, size 20 LEBs (5079040 bytes, 4.8 MiB), LEB size 253952 bytes (248.0 KiB), dynamic, name "kernel", alignment 1
[ 495.198793] block ubiblock0_2: created from ubi0:2(rootfs)
Volume ID 2, size 63 LEBs (15998976 bytes, 15.2 MiB), LEB size 253952 bytes (248.0 KiB), dynamic, name "rootfs", alignment 1
Set volume size to 8888320
Volume ID 3, size 35 LEBs (8888320 bytes, 8.4 MiB), LEB size 253952 bytes (248.0 KiB), dynamic, name "rootfs_data", alignment 1
sysupgrade successful
umount: can't unmount /dev: Resource busy
umount: can't unmount /tmp: Resource busy
[ 499.199603] reboot: Restarting system
This is the info from Serial on reboot
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1-00163
S - IMAGE_VARIANT_STRING=HAACANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x000002e5
B - 201 - PBL, Start
B - 2734 - bootable_media_detect_entry, Start
B - 3446 - bootable_media_detect_success, Start
B - 3451 - elf_loader_entry, Start
B - 7625 - auth_hash_seg_entry, Start
B - 7871 - auth_hash_seg_exit, Start
B - 69669 - elf_segs_hash_verify_entry, Start
B - 132525 - PBL, End
B - 147803 - SBL1, Start
B - 201208 - GCC [RstStat:0x10, RstDbg:0x600000] WDog Stat : 0x4
B - 207827 - pm_device_init, Start
B - 333456 - PM_SET_VAL:Skip
D - 125111 - pm_device_init, Delta
B - 335896 - pm_driver_init, Start
D - 5398 - pm_driver_init, Delta
B - 342210 - clock_init, Start
D - 2165 - clock_init, Delta
B - 346175 - boot_flash_init, Start
D - 16744 - boot_flash_init, Delta
B - 366701 - boot_config_data_table_init, Start
D - 3995 - boot_config_data_table_init, Delta - (575 Bytes)
B - 374082 - Boot Setting : 0x00000618
B - 378200 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:8
B - 385001 - sbl1_ddr_set_params, Start
B - 388814 - CPR configuration: 0x30c
B - 392260 - cpr_init, Start
B - 395036 - Rail:0 Mode: 5 Voltage: 832000
B - 399611 - CL CPR settled at 832000mV
B - 403088 - Rail:1 Mode: 5 Voltage: 896000
B - 407266 - Rail:1 Mode: 7 Voltage: 936000
D - 16531 - cpr_init, Delta
B - 414159 - Pre_DDR_clock_init, Start
B - 418185 - Pre_DDR_clock_init, End
B - 421479 - DDR Type : PCDDR3
B - 427244 - do ddr sanity test, Start
D - 1037 - do ddr sanity test, Delta
B - 432002 - DDR: Start of HAL DDR Boot Training
B - 436729 - DDR: End of HAL DDR Boot Training
B - 442402 - DDR: Checksum to be stored on flash is 2126086248
B - 452833 - Image Load, Start
D - 215910 - QSEE Image Loaded, Delta - (1374928 Bytes)
B - 668834 - Image Load, Start
D - 61 - SEC Image Loaded, Delta - (0 Bytes)
B - 676520 - Image Load, Start
D - 12017 - DEVCFG Image Loaded, Delta - (26148 Bytes)
B - 688629 - Image Load, Start
D - 23027 - RPM Image Loaded, Delta - (86660 Bytes)
B - 711748 - Image Load, Start
D - 89761 - APPSBL Image Loaded, Delta - (572642 Bytes)
B - 801662 - QSEE Execution, Start
D - 61 - QSEE Execution, Delta
B - 807457 - USB D+ check, Start
D - 0 - USB D+ check, Delta
B - 813831 - SBL1, End
D - 668346 - SBL1, Delta
S - Flash Throughput, 6901 KB/s (2061625 Bytes, 298710 us)
S - DDR Frequency, 466 MHz
S - Core 0 Frequency, 1651 MHz
U-Boot 2016.01 (Jul 31 2023 - 15:52:56 +0800)
DRAM: smem ram ptable found: ver: 1 len: 4
1 GiB
NAND: Could not find nand_gpio in dts, using defaults
Not an ONFI device
ONFI probe failed
ID = 2691a398
Vendor = 98
Device = a3
qpic_nand: changing oobsize to 160 from 256 bytes
SF: Unsupported flash IDs: manuf ff, jedec ffff, ext_jedec ffff
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
1024 MiB
MMC: sdhci: Node Not found, skipping initialization
PCI0 is not defined in the device tree
PCI1 is not defined in the device tree
In: serial@78B3000
Out: serial@78B3000
Err: serial@78B3000
machid: 8010008
MMC Device 0 not found
[arc_board_setting]
[serial_register_init]
Hit any key to stop autoboot: 0
[do_boot_unsignedimg(903)] debug:0
[do_boot_unsignedimg(934)] runcmd:setenv mtdids nand0=nand0 && setenv mtdparts mtdparts=nand0:0x6400000@0x8c80000(fs),${msmparts} && ubi part fs && ubi read 0x44000000 kernel &&
ubi0: attaching mtd1
ubi0: scanning is finished
ubi0: attached mtd1 (name "mtd=0", size 100 MiB)
ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192
ubi0: good PEBs: 400, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 154/41, WL threshold: 4096, image sequence number: 708906475
ubi0: available PEBs: 0, total reserved PEBs: 400, PEBs reserved for bad PEB handling: 80
Read 0 bytes from volume kernel to 44000000
No size specified -> Using max size (5079040)
[do_boot_unsignedimg(1004)] mtdids:nand0=nand0
## Loading kernel from FIT Image at 44000000 ...
Using 'config@hk09' configuration
Trying 'kernel-1' kernel subimage
Description: ARM64 OpenWrt Linux-6.1.67
Type: Kernel Image
Compression: gzip compressed
Data Start: 0x440000e8
Data Size: 4913479 Bytes = 4.7 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x41000000
Entry Point: 0x41000000
Hash algo: crc32
Hash value: 65af1c3b
Hash algo: sha1
Hash value: 33363f72ce9e39ba26d55d3eaba692ddb2fd9ae7
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 44000000 ...
Using 'config@hk09' configuration
Trying 'fdt-1' fdt subimage
Description: ARM64 OpenWrt arcadyan_aw1000 device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x444afb70
Data Size: 44036 Bytes = 43 KiB
Architecture: AArch64
Hash algo: crc32
Hash value: 7182ab67
Hash algo: sha1
Hash value: c762af969fe6338ed4a671cf28e0bbc68038cdb1
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x444afb70
Uncompressing Kernel Image ... OK
Loading Device Tree to 4a3f2000, end 4a3ffc03 ... OK
Could not find PCI in device tree
Using machid 0x8010008 from environment
Starting kernel ...
Jumping to AARCH64 kernel via monitor
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.1.67 (root@01490d8e4ffb) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r0-848fd360) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Tue Apr 16 18:36:10 2024
[ 0.000000] Machine model: Arcadyan AW1000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000040ffffff]
[ 0.000000] node 0: [mem 0x0000000041000000-0x000000004a3fffff]
[ 0.000000] node 0: [mem 0x000000004a400000-0x00000000510fffff]
[ 0.000000] node 0: [mem 0x0000000051100000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 17 pages/cpu s31080 r8192 d30360 u69632
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 pcie_dev=RG50 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait root=/dev/ubiblock0_1
[ 0.000000] Unknown kernel command line parameters "pcie_dev=RG50", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 887592K/1048576K available (7808K kernel code, 854K rwdata, 2284K rodata, 1280K init, 273K bss, 160984K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479]
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000116] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000129] pid_max: default: 32768 minimum: 301
[ 0.000598] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.000612] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.002423] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.002432] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.002626] rcu: Hierarchical SRCU implementation.
[ 0.002630] rcu: Max phase no-delay instances is 1000.
[ 0.003449] smp: Bringing up secondary CPUs ...
[ 0.004080] Detected VIPT I-cache on CPU1
[ 0.004220] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.004870] Detected VIPT I-cache on CPU2
[ 0.004971] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.005585] Detected VIPT I-cache on CPU3
[ 0.005681] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.005748] smp: Brought up 1 node, 4 CPUs
[ 0.005756] SMP: Total of 4 processors activated.
[ 0.005761] CPU features: detected: 32-bit EL0 Support
[ 0.005765] CPU features: detected: CRC32 instructions
[ 0.005829] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.005835] CPU: All CPU(s) started at EL1
[ 0.005838] alternatives: applying system-wide alternatives
[ 0.016845] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.016872] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.017089] pinctrl core: initialized pinctrl subsystem
[ 0.018246] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.018817] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.018862] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.018898] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.019268] thermal_sys: Registered thermal governor 'step_wise'
[ 0.019458] cpuidle: using governor menu
[ 0.019754] ASID allocator initialised with 65536 entries
[ 0.045410] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[ 0.054554] SCSI subsystem initialized
[ 0.054746] usbcore: registered new interface driver usbfs
[ 0.054784] usbcore: registered new interface driver hub
[ 0.054843] usbcore: registered new device driver usb
[ 0.055284] qcom_scm: convention: smc arm 64
[ 0.056630] clocksource: Switched to clocksource arch_sys_counter
[ 0.057720] NET: Registered PF_INET protocol family
[ 0.057862] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.059164] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[ 0.059188] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.059202] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.059289] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.059561] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.059659] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.059697] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.059919] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.059955] PCI: CLS 0 bytes, default 64
[ 0.061543] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 0.066584] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.066597] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.069665] qcom-qmp-usb-phy 58000.phy: supply vdda-phy not found, using dummy regulator
[ 0.069830] qcom-qmp-usb-phy 58000.phy: supply vdda-pll not found, using dummy regulator
[ 0.070646] qcom-qmp-usb-phy 78000.phy: supply vdda-phy not found, using dummy regulator
[ 0.070764] qcom-qmp-usb-phy 78000.phy: supply vdda-pll not found, using dummy regulator
[ 0.071869] qcom-qusb2-phy 59000.phy: supply vdd not found, using dummy regulator
[ 0.071988] qcom-qusb2-phy 59000.phy: supply vdda-pll not found, using dummy regulator
[ 0.072046] qcom-qusb2-phy 59000.phy: supply vdda-phy-dpdm not found, using dummy regulator
[ 0.072225] qcom-qusb2-phy 59000.phy: Registered Qcom-QUSB2 phy
[ 0.072407] qcom-qusb2-phy 79000.phy: supply vdd not found, using dummy regulator
[ 0.072527] qcom-qusb2-phy 79000.phy: supply vdda-pll not found, using dummy regulator
[ 0.072595] qcom-qusb2-phy 79000.phy: supply vdda-phy-dpdm not found, using dummy regulator
[ 0.072757] qcom-qusb2-phy 79000.phy: Registered Qcom-QUSB2 phy
[ 0.074848] gpio-export gpio-export: 4 gpio(s) exported
[ 0.076749] bam-dma-engine 704000.dma-controller: num-channels unspecified in dt
[ 0.076765] bam-dma-engine 704000.dma-controller: num-ees unspecified in dt
[ 0.081340] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.081983] msm_serial 78b3000.serial: msm_serial: detected port #0
[ 0.082020] msm_serial 78b3000.serial: uartclk = 3686400
[ 0.082130] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 21, base_baud = 230400) is a MSM
[ 0.082157] msm_serial: console setup on port #0
[ 0.800121] printk: console [ttyMSM0] enabled
[ 0.805291] msm_serial: driver initialized
[ 0.814110] loop: module loaded
[ 0.815305] nand: device found, Manufacturer ID: 0x98, Chip ID: 0xa3
[ 0.816078] nand: Toshiba TH58NYG3S0HBAI4 8G 1.8V 8-bit
[ 0.822693] nand: 1024 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 256
[ 0.828529] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
[ 0.857521] i2c_dev: i2c /dev entries driver
[ 0.863835] sdhci: Secure Digital Host Controller Interface driver
[ 0.863880] sdhci: Copyright(c) Pierre Ossman
[ 0.868999] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.875106] remoteproc remoteproc0: releasing cd00000.q6v5_wcss
[ 0.881961] NET: Registered PF_INET6 protocol family
[ 0.885910] Segment Routing with IPv6
[ 0.889984] In-situ OAM (IOAM) with IPv6
[ 0.893558] NET: Registered PF_PACKET protocol family
[ 0.897546] 8021q: 802.1Q VLAN Support v1.8
[ 0.924197] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
[ 0.924509] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
[ 0.930351] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1
[ 0.936932] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
[ 0.944584] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
[ 0.952100] cpr3_mem_acc_init: apc: not using memory accelerator regulator
[ 0.961235] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 712000 uV
[ 0.968183] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 848000 uV
[ 0.978165] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 920000 uV
[ 0.987974] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop=1016000 uV
[ 0.997834] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 702, quot_offset[ 7]= 0
[ 1.007595] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 940, quot_offset[ 7]= 235
[ 1.018445] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1052, quot_offset[ 7]= 110
[ 1.029383] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1203, quot_offset[ 7]= 150
[ 1.040543] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
[ 1.042865] nand: device found, Manufacturer ID: 0x98, Chip ID: 0xa3
[ 1.058024] nand: Toshiba TH58NYG3S0HBAI4 8G 1.8V 8-bit
[ 1.064433] nand: 1024 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 256
[ 1.069748] 26 qcomsmem partitions found on MTD device qcom_nand.0
[ 1.077389] Creating 26 MTD partitions on "qcom_nand.0":
[ 1.083360] 0x000000000000-0x000000100000 : "0:sbl1"
[ 1.089951] 0x000000100000-0x000000200000 : "0:mibib"
[ 1.094706] 0x000000200000-0x000000280000 : "0:bootconfig"
[ 1.099469] 0x000000280000-0x000000300000 : "0:bootconfig1"
[ 1.104777] 0x000000600000-0x000000900000 : "0:qsee"
[ 1.111338] 0x000000300000-0x000000600000 : "0:qsee_1"
[ 1.116514] 0x000000980000-0x000000a00000 : "0:devcfg"
[ 1.120455] 0x000000900000-0x000000980000 : "0:devcfg_1"
[ 1.125567] 0x000000a00000-0x000000a80000 : "0:apdp"
[ 1.131124] 0x000000a80000-0x000000b00000 : "0:apdp_1"
[ 1.135958] 0x000000b80000-0x000000c00000 : "0:rpm"
[ 1.141014] 0x000000b00000-0x000000b80000 : "0:rpm_1"
[ 1.145697] 0x000000c80000-0x000000d00000 : "0:cdt"
[ 1.150928] 0x000000c00000-0x000000c80000 : "0:cdt_1"
[ 1.155606] 0x000000d00000-0x000000d80000 : "0:appsblenv"
[ 1.160846] 0x000000e80000-0x000000f80000 : "0:appsbl"
[ 1.166411] 0x000000d80000-0x000000e80000 : "0:appsbl_1"
[ 1.171473] 0x000000f80000-0x000001000000 : "0:art"
[ 1.176749] 0x000008c80000-0x00000f080000 : "rootfs"
[ 1.222860] mtd: setting mtd18 (rootfs) as root device
[ 1.223375] mtdsplit: no squashfs found in "rootfs"
[ 1.226953] 0x00000f080000-0x000010900000 : "0:wififw"
[ 1.242435] 0x000001000000-0x000007400000 : "rootfs_1"
[ 1.285174] 0x000007400000-0x000008c80000 : "0:wififw_1"
[ 1.296006] 0x000010900000-0x000010b40000 : "0:ethphyfw"
[ 1.297533] 0x000010b40000-0x000010c40000 : "0:board_data"
[ 1.301328] 0x000010c40000-0x000011440000 : "0:arc_datadump"
[ 1.309529] 0x000011440000-0x00003e000000 : "0:arc_data"
[ 1.621002] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 800000 KHz, changing to: 1017600 KHz
[ 1.622889] remoteproc remoteproc0: cd00000.q6v5_wcss is available
[ 1.631181] ubi0: attaching mtd18
[ 2.034667] ubi0: scanning is finished
[ 2.041070] ubi0: attached mtd18 (name "rootfs", size 100 MiB)
[ 2.041112] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
[ 2.045805] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
[ 2.052680] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192
[ 2.059525] ubi0: good PEBs: 400, bad PEBs: 0, corrupted PEBs: 0
[ 2.066290] ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128
[ 2.072547] ubi0: max/mean erase counter: 154/41, WL threshold: 4096, image sequence number: 708906475
[ 2.079581] ubi0: available PEBs: 0, total reserved PEBs: 400, PEBs reserved for bad PEB handling: 80
[ 2.088878] ubi0: background thread "ubi_bgt0d" started, PID ▒[ 2.104874] Waiting for root device /dev/ubiblock0_1...
[ 32.486654] l11: disabling
Nothing after that even after 10mins ? Cannot connect to router at all.
Please help
Maybe you wrote a wrong firmware?
Downloaded the one for AW1000.
Do i flash the upgrade bin as suggested or the factory ubi ?
I am coming from standard Telstra frimware
host it with tftp server.
192.168.1.2
255.255.255.0
192.168.1.1
Interrupt U-Boot and run these commands
tftpboot *****.ubi
flash rootfs