Since some time a warning is given in the general Mikrotik/OpenWrt instructions to downgrade to a v6 ROS before attempting a sysupgrade.
Of course it would be better to figure out what is wrong and correct that.
Would like to share some experiences so far and perhaps somebody has an idea to overcome the last hurdle.
Tests here: Mikrotik SXTsq-5ac upgraded to ROS 7.7rc5 and OpenWrt Dec. 2022 home compile r21516+5-1b8c8864c5.
What works:
100% OK: loading and booting kernel.bin image via bootp…
and
Hello everybody. Couple of weeks ago i've tried to add support for my Yuncore AX840 (ipq6010) access point. At the moment there is similar chipset already added to owrt master branch ipq8071A (xiaomi ax3600).
So based on this commit i've made a commit for yuncore ax840.
Unfortunately, all I managed to do was get the firmware to compile and then boot the device. The kernel starts, but neither etnernet nor wireless work.
If somehow get the firmware work, then we can add support for a whole bu…
both threads are worth following, of course the Linksys MR7350 is also IPQ6010 so if IPQ6010 becomes supported, there's going to be more options for a black AX access point
1 Like