Hello.
On the section about enable i2c on the Raspberry Pi, an instruction to install the package kmod-i2c-bcm2835
is missing.
Without it the i2c will not be enabled, despite adding the dtparam=i2c1=on
line in the /boot/config.txt
.
Thank you.
Hello.
On the section about enable i2c on the Raspberry Pi, an instruction to install the package kmod-i2c-bcm2835
is missing.
Without it the i2c will not be enabled, despite adding the dtparam=i2c1=on
line in the /boot/config.txt
.
Thank you.
Knock yourself out.
This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.