Add support for Redmi AX6 AX3000 Wi-Fi 6 Mesh Router

OpenWrt for AX6 is on the way !

Use Google translate.

1 Like

Who can download the firmware files? I don't understand what need to do...
Link from the post:
extraction code: fmaw

would be nice to have the sources to build a personalized one. Not sure if I would like to trust in a firmware from a random source ...

That is not Openwrt.

We can make quasi International version with English UI by using xqrepack.
I am now using the entire /usr/lib/lua/luci/view and /usr/lib/lua/luci/i18n folders from the AX3600 international firmware on my AX3000.


I tried copying those two folders over from the international AX3600 image to my custom AX6 one, but I cannot see the new languages available in the settings. Is there any additional file/step?

you have to change the language in "/etc/config/luci" to "en"

1 Like

That did the trick, thanks!

Does anyone know how to edit lmo files (translation for Luci interface)?

[off topic]
I have the ax6 wall mounted. How should i position the bottom 4 antennas?
I know from the disassembled pictures that the upper left/right antennas are 2G and the rest is 5G.
Pictures for example:
I am using all antennas vertically, bottom 2 pointing down.



It deppends.. In general, signals are radiated outward from the antenna.. So you have to figure out what's the best placement for your installation.

thank you, that article was very helpfull.
Since my router is located on the 2nd floor, i should leave the antennas at a 30 degree angle.

1 Like

It looks like somebody has been able to generate an OpenWRT image for the AX6 (I cannot understand chinese, but that´s what my google-translated understanding of it is)

This is based on robimarko's source code:

has anyone tested it?
planning to buy this router, do you guys think that this will be supported in 2-3 mounths?

Hello my friends I need a lot of help please arrived my ax6 but I can't at all find the 2.4g wifi network appears in the settings plus us negative appliances.

Continuando minha Tim está no 1.1.10 tem algum arquivo com a nova ROM me ajudem por favor obrigado

how is going openwrt for this device..? anyone able to install any openwrt on our devices..?

Openwrt support for the AX6/AX3000 is developed in the AX3600 topic, as the hardware is the same. If anyone is interested, please follow the link there. You can already build working images for AX6 as well as AX3600. This topic has little relevant information...

1 Like

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.