Add new Platform IPQ5018 and device Cudy P5 ( Dual Sim, 5G Router)

For Developers
23

Do you want to explore your router and do the porting, it might be very similar to other device plus two modems.

24

you want find a better offer than that .. anywhere. Get a serial connection and provide him with what he asks for to do the port. It likely won't take him but a day to complete it if you provide him the information about the device

1 Like
27

What info is needed

28

A peek at the bootlog to start things off ...

29

yeah, and this is where it'll crash and burn ...

30

Let’s begin with the output of the following and zipped file of the /lib/firmware directory:

dmesg (for boot log)
cat /proc/mtd
find /sys/ | grep fdt (and send that over)
1 Like
31

(post deleted by author)

32

so ?

still no IPQ50xx in mainline, and def not in 5.15, means it's probably a QSDK, or someone ported the IPQ50xx code to 5.15, which is still useless, since it needs to be in 6.6.
new devices are added to master, not the current stable.

1 Like
34

why not provide what was requested to get your device supported, and quit wasting time on the stock stuff. Your intention is to have openwrt running on your device is it not ?

35

.... which will get you exactly nowhere.

37

You know, cudy provides source code and you just need to forward engineer it using code editing.

39

Thank you for the AI generated content.
We knew all this already, you're (the AI really) kicking in an open door.

1 Like
40

Ever heard of PCs booting without u-boot ?

41

In process of building Openwrt 18.06
Will update to latest openwrt version
Once I have built working firmware for device

42

(post deleted by author)

43

Cudy source is not OpenWRT. You can build minix2 as well for same no-op effect.

44

Most people would have dropped the building, when they were told there's no SoC support in mainline...

You should change your forum name to Sysiphus.

1 Like
45

ipq50xx-qsdk-kernel-5.4-openwrt-21.02-qsdk-11.5.05.841.1029
most up-to-date stable Openwrt version
I possibly could build with

46

Pointless, as you were told a week ago.

Enjoy your outdated, unsupported, QSDK based "Openwrt" release.

47

Mate, this is pointless as the gpl source is not OpenWRT, it’s a heavily modified, outdated, qsdk based version. If you have the dts, or at least have serial access and provide me with the info I requested earlier, I can add an initial image for your board which you can further customize if needed, based on current snapshot..

1 Like