After setting up VPN my 5Ghz WLAN is down.
Kernel Log:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.70 (davidc502@pc2) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r8082-95b3f8ec8d)) #0 SMP Thu Sep 20 20:03:48 2018
[ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Linksys WRT32X
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c0a30dc0, node_mem_map dfbf9000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] random: get_random_bytes called from start_kernel+0x74/0x47c with crng_init=0
[ 0.000000] percpu: Embedded 12 pages/cpu @dfbd1000 s18892 r8192 d22068 u49152
[ 0.000000] pcpu-alloc: s18892 r8192 d22068 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock6
[ 0.000000] Bootloader command line (ignored): console= root=/dev/mtdblock6
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 509872K/524288K available (6144K kernel code, 197K rwdata, 1404K rodata, 1024K init, 276K bss, 14416K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0700000 (7136 kB)
[ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB)
[ 0.000000] .data : 0xc0a00000 - 0xc0a316c0 ( 198 kB)
[ 0.000000] .bss : 0xc0a316c0 - 0xc0a767b0 ( 277 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 D prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[ 0.000005] sched_clock: 64 bits at 933MHz, resolution 1ns, wraps every 4398046511103ns
[ 0.000013] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x1ae5b571769, max_idle_ns: 881590513431 ns
[ 0.000024] Switching to timer-based delay loop, resolution 1ns
[ 0.000140] Ignoring duplicate/late registration of read_current_timer delay
[ 0.000148] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.000270] Calibrating delay loop (skipped), value calculated using timer frequency.. 1866.00 BogoMIPS (lpj=9330000)
[ 0.000276] pid_max: default: 32768 minimum: 301
[ 0.000397] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000401] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000769] CPU: Testing write buffer coherency: ok
[ 0.000955] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001126] Setting up static identity map for 0x100000 - 0x100060
[ 0.001188] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[ 0.001252] mvebu-pmsu: Initializing Power Management Service Unit
[ 0.001315] Hierarchical SRCU implementation.
[ 0.001541] smp: Bringing up secondary CPUs ...
[ 0.001708] Booting CPU 1
[ 0.001847] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.001881] smp: Brought up 1 node, 2 CPUs
[ 0.001886] SMP: Total of 2 processors activated (3732.00 BogoMIPS).
[ 0.001889] CPU: All CPU(s) started in SVC mode.
[ 0.007520] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.007627] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.007634] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.007694] pinctrl core: initialized pinctrl subsystem
[ 0.008434] NET: Registered protocol family 16
[ 0.008841] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.010430] cpuidle: using governor ladder
[ 0.010566] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[ 0.010572] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[ 0.022849] reg-fixed-voltage usb3_1-vbus: could not find pctldev for node /soc/internal-regs/pinctrl@18000/usb3_1-vbus-pins, deferring probe
[ 0.023335] SCSI subsystem initialized
[ 0.023716] libata version 3.00 loaded.
[ 0.023944] usbcore: registered new interface driver usbfs
[ 0.023993] usbcore: registered new interface driver hub
[ 0.024036] usbcore: registered new device driver usb
[ 0.025285] clocksource: Switched to clocksource arm_global_timer
[ 0.025989] NET: Registered protocol family 2
[ 0.026411] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.026433] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.026460] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.026528] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.026543] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.026661] NET: Registered protocol family 1
[ 0.026684] PCI: CLS 0 bytes, default 64
[ 0.028466] Crashlog allocated RAM at address 0x3f00000
[ 0.028722] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.036767] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.036776] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.040751] io scheduler noop registered
[ 0.040757] io scheduler deadline registered (default)
[ 0.041969] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[ 0.043414] mvebu-pcie soc:pcie: PCI host bridge to bus 0000:00
[ 0.043426] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
[ 0.043432] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 0.043439] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.043459] pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400
[ 0.043605] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400
[ 0.043725] PCI: bus0: Fast back to back transfers disabled
[ 0.043730] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.043736] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.043818] pci 0000:01:00.0: [11ab:2b40] type 00 class 0x020000
[ 0.043839] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x401fffff 64bit pref]
[ 0.043848] pci 0000:01:00.0: reg 0x18: [mem 0x40200000-0x402fffff 64bit pref]
[ 0.043909] pci 0000:01:00.0: supports D1 D2
[ 0.043912] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.044017] PCI: bus1: Fast back to back transfers disabled
[ 0.044023] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.044116] pci 0000:02:00.0: [11ab:2b40] type 00 class 0x020000
[ 0.044144] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x421fffff 64bit pref]
[ 0.044155] pci 0000:02:00.0: reg 0x18: [mem 0x42200000-0x422fffff 64bit pref]
[ 0.044237] pci 0000:02:00.0: supports D1 D2
[ 0.044240] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.044348] PCI: bus2: Fast back to back transfers disabled
[ 0.044353] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 0.044372] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe02fffff]
[ 0.044377] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0400000-0xe06fffff]
[ 0.044389] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit pref]
[ 0.044398] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0200000-0xe02fffff 64bit pref]
[ 0.044410] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.044415] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe02fffff]
[ 0.044424] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0400000-0xe05fffff 64bit pref]
[ 0.044434] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0600000-0xe06fffff 64bit pref]
[ 0.044446] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.044450] pci 0000:00:02.0: bridge window [mem 0xe0400000-0xe06fffff]
[ 0.044787] mv_xor f1060800.xor: Marvell shared XOR driver
[ 0.109465] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.109670] mv_xor f1060900.xor: Marvell shared XOR driver
[ 0.169187] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.169485] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.171174] console [ttyS0] disabled
[ 0.191240] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 22, base_baud = 12500000) is a 16550A
[ 0.915025] console [ttyS0] enabled
[ 0.921910] loop: module loaded
[ 0.925601] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 0.934689] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 0.944166] scsi host0: ahci-mvebu
[ 0.947938] scsi host1: ahci-mvebu
[ 0.951498] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
[ 0.959475] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
[ 0.968019] pxa3xx-nand f10d0000.flash: This platform can't do DMA on this device
[ 0.975824] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
[ 0.982204] nand: AMD/Spansion S34ML02G2
[ 0.986148] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
[ 0.993839] pxa3xx-nand f10d0000.flash: ECC strength 16, ECC step size 2048
[ 1.001046] Bad block table found at page 131008, version 0x01
[ 1.007241] Bad block table found at page 130944, version 0x01
[ 1.013419] 10 fixed-partitions partitions found on MTD device pxa3xx_nand-0
[ 1.020505] Creating 10 MTD partitions on "pxa3xx_nand-0":
[ 1.026022] 0x000000000000-0x000000200000 : "u-boot"
[ 1.031523] 0x000000200000-0x000000220000 : "u_env"
[ 1.036883] 0x000000220000-0x000000260000 : "s_env"
[ 1.042236] 0x000000260000-0x000000820000 : "unused_area"
[ 1.048127] 0x0000007e0000-0x000000820000 : "devinfo"
[ 1.053705] 0x000000900000-0x000008400000 : "kernel1"
[ 1.059468] 0x000000c00000-0x000008400000 : "ubi"
[ 1.064876] 0x000008400000-0x00000ff00000 : "kernel2"
[ 1.070621] 0x000008700000-0x00000ff00000 : "rootfs2"
[ 1.076390] 0x00000ff00000-0x000010000000 : "BBT"
[ 1.082010] libphy: Fixed MDIO Bus: probed
[ 1.086770] libphy: orion_mdio_bus: probed
[ 1.091089] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[ 1.100408] mvneta f1070000.ethernet eth0: Using hardware mac address 60:38:e0:c7:d7:50
[ 1.110220] mvneta f1034000.ethernet eth1: Using hardware mac address 60:38:e0:c7:d7:50
[ 1.118454] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.125010] ehci-pci: EHCI PCI platform driver
[ 1.129516] ehci-platform: EHCI generic platform driver
[ 1.134847] ehci-orion: EHCI orion driver
[ 1.138989] orion-ehci f1058000.usb: EHCI Host Controller
[ 1.144429] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[ 1.152110] orion-ehci f1058000.usb: irq 38, io mem 0xf1058000
[ 1.185248] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[ 1.191602] hub 1-0:1.0: USB hub found
[ 1.195411] hub 1-0:1.0: 1 port detected
[ 1.200046] usbcore: registered new interface driver usb-storage
[ 1.206349] i2c /dev entries driver
[ 1.221527] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.234103] orion_wdt: Initial timeout 171 sec
[ 1.238937] sdhci: Secure Digital Host Controller Interface driver
[ 1.245142] sdhci: Copyright(c) Pierre Ossman
[ 1.296503] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.301956] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.315288] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
[ 1.322854] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.335871] marvell-cesa f1090000.crypto: CESA device successfully registered
[ 1.344028] NET: Registered protocol family 10
[ 1.349580] Segment Routing with IPv6
[ 1.353303] NET: Registered protocol family 17
[ 1.357911] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.371227] 8021q: 802.1Q VLAN Support v1.8
[ 1.375470] Registering SWP/SWPB emulation handler
[ 1.382879] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 1.388248] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[ 1.395914] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[ 1.404514] xhci-hcd f10f8000.usb3: irq 44, io mem 0xf10f8000
[ 1.410740] hub 2-0:1.0: USB hub found
[ 1.414542] hub 2-0:1.0: 1 port detected
[ 1.418697] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 1.424047] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[ 1.431600] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed
[ 1.438143] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.446646] hub 3-0:1.0: USB hub found
[ 1.450445] hub 3-0:1.0: 1 port detected
[ 1.455000] UBI: auto-attach mtd6
[ 1.458348] ubi0: attaching mtd6
[ 1.467354] random: fast init done
[ 1.483880] mmc0: new high speed SDIO card at address 0001
[ 1.794099] ubi0: scanning is finished
[ 1.806494] ubi0: attached mtd6 (name "ubi", size 120 MiB)
[ 1.812004] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.818915] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.825735] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.832726] ubi0: good PEBs: 960, bad PEBs: 0, corrupted PEBs: 0
[ 1.838760] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 1.846016] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1193684026
[ 1.855189] ubi0: available PEBs: 0, total reserved PEBs: 960, PEBs reserved for bad PEB handling: 40
[ 1.864455] ubi0: background thread "ubi_bgt0d" started, PID 780
[ 1.871085] block ubiblock0_0: created from ubi0:0(rootfs)
[ 1.876603] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 1.883796] mvsw61xx 10.mvsw61xx: Found MV88E6352 at f1072004.mdio-mii:10
[ 1.890637] mvsw61xx 10.mvsw61xx: Using direct addressing
[ 1.905629] hctosys: unable to open rtc device (rtc0)
[ 1.915889] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 1.923579] Freeing unused kernel memory: 1024K
[ 2.124578] init: Console is alive
[ 2.128132] init: - watchdog -
[ 2.515057] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.549941] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.556608] ohci-platform: OHCI generic platform driver
[ 2.562518] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.569595] ohci-pci: OHCI PCI platform driver
[ 2.574260] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.586364] init: - preinit -
[ 2.790117] mvneta f1070000.ethernet tmp0: renamed from eth0
[ 2.797234] random: procd: uninitialized urandom read (4 bytes read)
[ 2.846970] mvneta f1034000.ethernet eth0: renamed from eth1
[ 2.886900] mvneta f1070000.ethernet eth1: renamed from tmp0
[ 3.092585] random: crng init done
[ 3.361609] mvneta f1034000.ethernet eth0: configuring for fixed/sgmii link mode
[ 3.369527] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.375645] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 3.383543] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.471444] mount_root: loading kmods from internal overlay
[ 6.487246] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 6.496640] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 6.583161] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 899
[ 6.604382] UBIFS (ubi0:1): recovery needed
[ 6.676257] UBIFS (ubi0:1): recovery completed
[ 6.680779] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 6.688659] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 6.698627] UBIFS (ubi0:1): FS size: 100564992 bytes (95 MiB, 792 LEBs), journal size 5079040 bytes (4 MiB, 40 LEBs)
[ 6.709201] UBIFS (ubi0:1): reserved for root: 4749932 bytes (4638 KiB)
[ 6.715851] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 8BC551C5-E788-4EF6-A106-A4D2F6B2BE3C, small LPT model
[ 6.728056] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 6.737987] block: extroot: not configured
[ 6.775304] UBIFS (ubi0:1): un-mount UBI device 0
[ 6.780033] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[ 6.826615] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 902
[ 6.873447] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 6.881357] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 6.891321] UBIFS (ubi0:1): FS size: 100564992 bytes (95 MiB, 792 LEBs), journal size 5079040 bytes (4 MiB, 40 LEBs)
[ 6.901891] UBIFS (ubi0:1): reserved for root: 4749932 bytes (4638 KiB)
[ 6.908538] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 8BC551C5-E788-4EF6-A106-A4D2F6B2BE3C, small LPT model
[ 6.979928] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 6.989518] block: extroot: not configured
[ 7.036354] mount_root: switching to ubifs overlay
[ 7.099480] urandom-seed: Seeding with /etc/urandom.seed
[ 7.139317] mvneta f1034000.ethernet eth0: Link is Down
[ 7.197677] procd: - early -
[ 7.200605] procd: - watchdog -
[ 7.825738] procd: - watchdog -
[ 7.829039] procd: - ubus -
[ 7.897031] procd: - init -
[ 8.085111] kmodloader: loading kernel modules from /etc/modules.d/*
[ 8.100360] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 8.108720] tun: Universal TUN/TAP device driver, 1.6
[ 8.115584] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 8.125205] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 8.156297] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.417880] Netfilter messages via NETLINK v0.30.
[ 8.423360] ip_set: protocol 6
[ 8.439005] cryptodev: driver 1.9 loaded.
[ 8.443591] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 8.451686] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 8.472998] <<Marvell Mac80211 Wireless PCIE Network Driver version 10.3.8.0-20180920>>
[ 8.481143] pci 0000:00:01.0: enabling device (0140 -> 0142)
[ 8.487006] ieee80211 phy0: priv->pcmd_buf = dd8ec000 priv->pphys_cmd_buf = 1d8ec000
[ 8.548953] ieee80211 phy0: fw download start
[ 8.548957] ieee80211 phy0: ddr init: download start
[ 8.549335] ieee80211 phy0: ddr init: download complete
[ 8.687455] ieee80211 phy0: FwSize = 450732 downloaded Size = 450732 curr_iteration 65521
[ 11.555241] ieee80211 phy0: fw download complete
[ 11.555297] ieee80211 phy0: device node: /soc/pcie/pcie@1,0
[ 11.702344] ieee80211 phy0: pcmd = dd8ec000
[ 11.720253] ieee80211 phy0: firmware version: 0x9030206
[ 12.028259] ieee80211 phy0: firmware region code: 30
[ 12.066419] ieee80211 phy0: 2G disabled, 5G enabled
[ 12.071320] ieee80211 phy0: 4 TX antennas, 4 RX antennas
[ 12.076917] pci 0000:00:02.0: enabling device (0140 -> 0142)
[ 12.082719] ieee80211 phy1: priv->pcmd_buf = d8f78000 priv->pphys_cmd_buf = 18f78000
[ 12.091036] ieee80211 phy1: fw download start
[ 12.091042] ieee80211 phy1: ddr init: download start
[ 12.091423] ieee80211 phy1: ddr init: download complete
[ 12.237613] ieee80211 phy1: FwSize = 450732 downloaded Size = 450732 curr_iteration 65526
[ 13.431248] ieee80211 phy1: fw download complete
[ 13.431303] ieee80211 phy1: device node: /soc/pcie/pcie@2,0
[ 13.578577] ieee80211 phy1: pcmd = d8f78000
[ 13.595251] ieee80211 phy1: firmware version: 0x9030206
[ 13.902246] ieee80211 phy1: firmware region code: 30
[ 13.934662] ieee80211 phy1: 2G enabled, 5G disabled
[ 13.939585] ieee80211 phy1: 4 TX antennas, 4 RX antennas
[ 13.949898] hidraw: raw HID events driver (C) Jiri Kosina
[ 13.961178] u32 classifier
[ 13.963900] input device check on
[ 13.967608] Actions configured
[ 13.972108] Mirror/redirect action on
[ 13.979123] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 13.998059] fuse init (API version 7.26)
[ 14.007573] Bluetooth: Core ver 2.22
[ 14.011238] NET: Registered protocol family 31
[ 14.015723] Bluetooth: HCI device and connection manager initialized
[ 14.022121] Bluetooth: HCI socket layer initialized
[ 14.027041] Bluetooth: L2CAP socket layer initialized
[ 14.032146] Bluetooth: SCO socket layer initialized
[ 14.038409] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.043752] Bluetooth: BNEP filters: protocol multicast
[ 14.049037] Bluetooth: BNEP socket layer initialized
[ 14.057865] Bluetooth: vendor=0x2df, device=0x9136, class=255, fn=2
[ 14.859597] Bluetooth: FW download over, size 695532 bytes
[ 15.455270] sdio platform data not available
[ 15.456525] usbcore: registered new interface driver btusb
[ 15.467542] Bluetooth: HCI UART driver ver 2.3
[ 15.472012] Bluetooth: HCI UART protocol H4 registered
[ 15.477186] Bluetooth: HCI UART protocol BCSP registered
[ 15.482523] Bluetooth: HCI UART protocol ATH3K registered
[ 15.488755] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 15.494708] Bluetooth: HIDP socket layer initialized
[ 15.500656] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.125871] Bluetooth: RFCOMM TTY layer initialized
[ 16.130781] Bluetooth: RFCOMM socket layer initialized
[ 16.135970] Bluetooth: RFCOMM ver 1.11
[ 16.141721] usbcore: registered new interface driver ums-alauda
[ 16.148333] usbcore: registered new interface driver ums-cypress
[ 16.154840] usbcore: registered new interface driver ums-datafab
[ 16.161397] usbcore: registered new interface driver ums-freecom
[ 16.167931] usbcore: registered new interface driver ums-isd200
[ 16.174361] usbcore: registered new interface driver ums-jumpshot
[ 16.180963] usbcore: registered new interface driver ums-karma
[ 16.187348] usbcore: registered new interface driver ums-sddr09
[ 16.193778] usbcore: registered new interface driver ums-sddr55
[ 16.200221] usbcore: registered new interface driver ums-usbat
[ 16.220778] xt_time: kernel timezone is -0000
[ 16.408750] PPP generic driver version 2.4.2
[ 16.413818] NET: Registered protocol family 24
[ 16.419526] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 18.814046] mvneta f1034000.ethernet eth0: configuring for fixed/sgmii link mode
[ 18.821573] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.828151] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 18.836974] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.849613] br-lan: port 1(eth0.1) entered blocking state
[ 18.855053] br-lan: port 1(eth0.1) entered disabled state
[ 18.860764] device eth0.1 entered promiscuous mode
[ 18.865623] device eth0 entered promiscuous mode
[ 18.871566] br-lan: port 1(eth0.1) entered blocking state
[ 18.877025] br-lan: port 1(eth0.1) entered forwarding state
[ 18.882850] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 18.897225] mvneta f1070000.ethernet eth1: configuring for fixed/rgmii-id link mode
[ 18.905520] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 18.911420] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 18.921643] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 19.852125] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 20.994573] ieee80211 phy1: change: 0xffffffff
[ 21.080718] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 21.313738] ieee80211 phy0: change: 0xffffffff
[ 21.425141] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.433050] br-lan: port 2(wlan1) entered blocking state
[ 21.438428] br-lan: port 2(wlan1) entered disabled state
[ 21.443980] device wlan1 entered promiscuous mode
[ 21.449355] br-lan: port 3(wlan0) entered blocking state
[ 21.454705] br-lan: port 3(wlan0) entered disabled state
[ 21.460404] device wlan0 entered promiscuous mode
[ 26.465950] ieee80211 phy1: change: 0x100
[ 26.475046] ieee80211 phy1: change: 0x40
[ 26.475314] ieee80211 phy0: change: 0x100
[ 26.484386] ieee80211 phy0: change: 0x40
[ 26.665248] ieee80211 phy1: change: 0x40
[ 26.695253] ieee80211 phy0: change: 0x40
[ 26.855248] ieee80211 phy1: change: 0x40
[ 26.905244] ieee80211 phy0: change: 0x40
[ 27.045424] ieee80211 phy1: change: 0x40
[ 27.125257] ieee80211 phy0: change: 0x40
[ 27.235249] ieee80211 phy1: change: 0x40
[ 27.345249] ieee80211 phy0: change: 0x40
[ 27.425250] ieee80211 phy1: change: 0x40
[ 27.555252] ieee80211 phy0: change: 0x40
[ 27.625247] ieee80211 phy1: change: 0x40
[ 27.765254] ieee80211 phy0: change: 0x40
[ 27.815264] ieee80211 phy1: change: 0x40
[ 27.975254] ieee80211 phy0: change: 0x40
[ 28.005249] ieee80211 phy1: change: 0x40
[ 28.185279] ieee80211 phy0: change: 0x60
[ 28.205267] ieee80211 phy1: change: 0x40
[ 28.405347] ieee80211 phy0: change: 0x40
[ 28.405358] ieee80211 phy1: change: 0x40
[ 28.595253] ieee80211 phy1: change: 0x40
[ 28.615252] ieee80211 phy0: change: 0x40
[ 28.785243] ieee80211 phy1: change: 0x40
[ 28.825244] ieee80211 phy0: change: 0x40
[ 28.975243] ieee80211 phy1: change: 0x40
[ 29.035251] ieee80211 phy0: change: 0x40
[ 29.052260] ieee80211 phy1: change: 0x100
[ 29.105375] ieee80211 phy1: change: 0x100
[ 29.114395] ieee80211 phy1: change: 0x42
[ 29.255252] ieee80211 phy0: change: 0x40
[ 29.259293] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 29.265787] br-lan: port 2(wlan1) entered blocking state
[ 29.271126] br-lan: port 2(wlan1) entered forwarding state
[ 29.485253] ieee80211 phy0: change: 0x40
[ 29.705246] ieee80211 phy0: change: 0x40
[ 29.915244] ieee80211 phy0: change: 0x40
[ 30.135246] ieee80211 phy0: change: 0x40
[ 30.355250] ieee80211 phy0: change: 0x40
[ 30.565552] ieee80211 phy0: change: 0x60
[ 30.661319] ieee80211 phy0: change: 0x100
[ 30.670295] ieee80211 phy0: change: 0x100
[ 30.679400] ieee80211 phy0: change: 0x40
[ 30.895251] ieee80211 phy0: change: 0x40
[ 31.115244] ieee80211 phy0: change: 0x40
[ 31.345258] ieee80211 phy0: change: 0x40
[ 31.565252] ieee80211 phy0: change: 0x40
[ 31.785248] ieee80211 phy0: change: 0x40
[ 31.995242] ieee80211 phy0: change: 0x40
[ 32.205258] ieee80211 phy0: change: 0x40
[ 32.415248] ieee80211 phy0: change: 0x60
[ 32.625246] ieee80211 phy0: change: 0x40
[ 32.835251] ieee80211 phy0: change: 0x40
[ 33.055250] ieee80211 phy0: change: 0x40
[ 33.275250] ieee80211 phy0: change: 0x40
[ 33.485252] ieee80211 phy0: change: 0x40
[ 33.705248] ieee80211 phy0: change: 0x40
[ 33.925248] ieee80211 phy0: change: 0x40
[ 34.145245] ieee80211 phy0: change: 0x40
[ 34.365250] ieee80211 phy0: change: 0x40
[ 34.595261] ieee80211 phy0: change: 0x40
[ 34.805250] ieee80211 phy0: change: 0x60
[ 34.900259] ieee80211 phy0: change: 0x100
[ 34.909286] ieee80211 phy0: change: 0x100
[ 34.918387] ieee80211 phy0: change: 0x40
[ 35.135257] ieee80211 phy0: change: 0x40
[ 35.345252] ieee80211 phy0: change: 0x40
[ 35.565245] ieee80211 phy0: change: 0x40
[ 35.795260] ieee80211 phy0: change: 0x40
[ 36.005244] ieee80211 phy0: change: 0x40
[ 36.215244] ieee80211 phy0: change: 0x40
[ 36.425247] ieee80211 phy0: change: 0x40
[ 36.635292] ieee80211 phy0: change: 0x60
[ 36.845249] ieee80211 phy0: change: 0x40
[ 37.055249] ieee80211 phy0: change: 0x40
[ 37.275248] ieee80211 phy0: change: 0x40
[ 37.485250] ieee80211 phy0: change: 0x40
[ 37.715244] ieee80211 phy0: change: 0x40
[ 37.935245] ieee80211 phy0: change: 0x40
[ 45.295249] ieee80211 phy0: change: 0x40
[ 45.505251] ieee80211 phy0: change: 0x40
[ 45.725247] ieee80211 phy0: change: 0x40
[ 45.945249] ieee80211 phy0: change: 0x40
[ 46.155252] ieee80211 phy0: change: 0x40
[ 46.375281] ieee80211 phy0: change: 0x40
[ 46.595246] ieee80211 phy0: change: 0x40
[ 46.845263] ieee80211 phy0: change: 0x40
[ 47.055295] ieee80211 phy0: change: 0x40
[ 47.275271] ieee80211 phy0: change: 0x40
[ 47.485249] ieee80211 phy0: change: 0x60
[ 47.581268] ieee80211 phy0: change: 0x100
[ 47.590291] ieee80211 phy0: change: 0x100
[ 47.599485] ieee80211 phy0: change: 0x60
[ 47.815245] ieee80211 phy0: change: 0x40
[ 48.035248] ieee80211 phy0: change: 0x60
[ 48.075334] device wlan0 left promiscuous mode
[ 48.079947] br-lan: port 3(wlan0) entered disabled state
[ 48.132256] ieee80211 phy0: change: 0x100
[ 48.318273] ieee80211 phy0: change: 0xffffffff
[ 48.421334] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 48.442078] br-lan: port 3(wlan0) entered blocking state
[ 48.447435] br-lan: port 3(wlan0) entered disabled state
[ 48.452943] device wlan0 entered promiscuous mode