Hello Everyone,
I did pull the latest changes in from yesterday and made a build for the WRT3200ACM.
The 5G radio doesn't seem to come up anymore.
Linux version 4.14.78 (bla@bla) (gcc version 8.2.0 (OpenWrt GCC 8.2.0 r7946-2c01425d2d)) #0 SMP Sat Nov 3 01:36:24 2018
Does anyone else experience this as well?
Thanks,
Reinoud.
hnyman
November 4, 2018, 4:51pm
2
Seems to work normally for me, but I am using the default gcc 7.3.0.
Linksys WRT3200ACM
OpenWrt SNAPSHOT r8410-900005ee75
Linux version 4.14.78 (perus@ub1810) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r8410-900005ee75)) #0 SMP Sun Nov 4 16:12:28 2018
[ 13.538045] Loading modules backported from Linux version v4.19-rc5-0-g6bf4ca7fbc85
[ 13.545783] Backport generated by backports.git v4.19-rc5-1-0-g05571dcd
[ 13.581728] <<Marvell Mac80211 Wireless PCIE Network Driver version 10.3.8.0-20181029>>
[ 13.589788] pci 0000:00:01.0: enabling device (0140 -> 0142)
[ 13.595667] ieee80211 phy0: priv->pcmd_buf = dddac000 priv->pphys_cmd_buf = 1ddac000
[ 13.657673] ieee80211 phy0: fw download start
[ 13.657678] ieee80211 phy0: ddr init: download start
[ 13.658056] ieee80211 phy0: ddr init: download complete
[ 13.796237] ieee80211 phy0: FwSize = 450732 downloaded Size = 450732 curr_iteration 65523
[ 16.665629] ieee80211 phy0: fw download complete
[ 16.665709] ieee80211 phy0: device node: /soc/pcie/pcie@1,0
[ 16.684714] ieee80211 phy0: pcmd = dddac000
[ 16.719876] ieee80211 phy0: firmware version: 0x9030206
[ 17.291247] ieee80211 phy0: firmware region code: 30
[ 17.355556] ieee80211 phy0: 2G disabled, 5G enabled
[ 17.360460] ieee80211 phy0: 4 TX antennas, 4 RX antennas
[ 17.366007] pci 0000:00:02.0: enabling device (0140 -> 0142)
[ 17.371830] ieee80211 phy1: priv->pcmd_buf = d9b10000 priv->pphys_cmd_buf = 19b10000
[ 17.379929] ieee80211 phy1: fw download start
[ 17.379935] ieee80211 phy1: ddr init: download start
[ 17.380317] ieee80211 phy1: ddr init: download complete
[ 17.521437] ieee80211 phy1: FwSize = 450732 downloaded Size = 450732 curr_iteration 65526
[ 18.713942] ieee80211 phy1: fw download complete
[ 18.714010] ieee80211 phy1: device node: /soc/pcie/pcie@2,0
[ 18.733073] ieee80211 phy1: pcmd = d9b10000
[ 18.761438] ieee80211 phy1: firmware version: 0x9030206
[ 19.334076] ieee80211 phy1: firmware region code: 30
[ 19.392364] ieee80211 phy1: 2G enabled, 5G disabled
[ 19.397282] ieee80211 phy1: 4 TX antennas, 4 RX antennas
Well, it did use to work well, also with gcc 8.2, but just since yesterday's pull it doesnt.
I did a dirclean and started over. Now it works fine, also with gcc 8.2.0
system
Closed
November 17, 2018, 3:46am
5
This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.