Hi all,
I am porting my IPQ4029 Machine to OpenWrt master branch,
The board-2.bin is generated by below files from QSDK firmware:
/lib/firmware/IPQ4019/hw.1/boardData_1_0_IPQ4019_DK04_2G.bin
/lib/firmware/IPQ4019/hw.1/boardData_1_0_IPQ4019_DK04_5G.bin
but now the 2.4G wifi does work while 5G works fine.
Any hints will be appreciated.
LOGREAD
......
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 6.902050] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/fwcfg-ahb-a000000.wifi.txt failed with error -2
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 6.902100] ath10k_ahb a000000.wifi: Falling back to user helper
Fri Mar 8 08:54:09 2019 kern.err kernel: [ 6.943404] firmware ath10k!fwcfg-ahb-a000000.wifi.txt: firmware_loading_store: map pages failed
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 6.943865] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/pre-cal-ahb-a000000.wifi.bin failed with error -2
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 6.951334] ath10k_ahb a000000.wifi: Falling back to user helper
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 7.046848] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/ct-firmware-5.bin failed with error -2
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 7.046899] ath10k_ahb a000000.wifi: Falling back to user helper
Fri Mar 8 08:54:09 2019 kern.err kernel: [ 7.110332] firmware ath10k!QCA4019!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 7.110631] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/ct-firmware-2.bin failed with error -2
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 7.118561] ath10k_ahb a000000.wifi: Falling back to user helper
Fri Mar 8 08:54:09 2019 kern.err kernel: [ 7.182600] firmware ath10k!QCA4019!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 7.183065] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/firmware-6.bin failed with error -2
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 7.190879] ath10k_ahb a000000.wifi: Falling back to user helper
Fri Mar 8 08:54:09 2019 kern.err kernel: [ 7.254837] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
Fri Mar 8 08:54:09 2019 kern.info kernel: [ 7.256738] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003900ff sub 0000:0000
Fri Mar 8 08:54:09 2019 kern.info kernel: [ 7.262799] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
Fri Mar 8 08:54:09 2019 kern.info kernel: [ 7.276039] ath10k_ahb a000000.wifi: firmware ver 10.4b-ct-4019-fW-012-38a5514c api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT crc32 0da99c33
Fri Mar 8 08:54:09 2019 kern.info kernel: [ 7.325033] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:20 crc32 035c0037
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 8.638976] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 8.639027] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
Fri Mar 8 08:54:09 2019 kern.info kernel: [ 8.686270] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
Fri Mar 8 08:54:09 2019 kern.info kernel: [ 8.687681] ath10k_ahb a000000.wifi: wmi print 'free: 56696 iram: 22168 sram: 35968'
Fri Mar 8 08:54:09 2019 kern.info kernel: [ 8.853830] ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
Fri Mar 8 08:54:09 2019 kern.debug kernel: [ 8.932974] ath: EEPROM regdomain: 0x0
Fri Mar 8 08:54:09 2019 kern.debug kernel: [ 8.932983] ath: EEPROM indicates default country code should be used
Fri Mar 8 08:54:09 2019 kern.debug kernel: [ 8.932987] ath: doing EEPROM country->regdmn map search
Fri Mar 8 08:54:09 2019 kern.debug kernel: [ 8.932994] ath: country maps to regdmn code: 0x3a
Fri Mar 8 08:54:09 2019 kern.debug kernel: [ 8.933000] ath: Country alpha2 being used: US
Fri Mar 8 08:54:09 2019 kern.debug kernel: [ 8.933003] ath: Regpair used: 0x3a
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 9.112413] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/fwcfg-ahb-a800000.wifi.txt failed with error -2
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 9.112471] ath10k_ahb a800000.wifi: Falling back to user helper
Fri Mar 8 08:54:09 2019 kern.err kernel: [ 9.275555] firmware ath10k!fwcfg-ahb-a800000.wifi.txt: firmware_loading_store: map pages failed
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 9.275910] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/pre-cal-ahb-a800000.wifi.bin failed with error -2
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 9.283513] ath10k_ahb a800000.wifi: Falling back to user helper
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 9.400716] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/ct-firmware-5.bin failed with error -2
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 9.400768] ath10k_ahb a800000.wifi: Falling back to user helper
Fri Mar 8 08:54:09 2019 kern.err kernel: [ 9.460805] firmware ath10k!QCA4019!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 9.461176] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/ct-firmware-2.bin failed with error -2
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 9.469032] ath10k_ahb a800000.wifi: Falling back to user helper
Fri Mar 8 08:54:09 2019 kern.err kernel: [ 9.526752] firmware ath10k!QCA4019!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 9.527140] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/firmware-6.bin failed with error -2
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 9.535061] ath10k_ahb a800000.wifi: Falling back to user helper
Fri Mar 8 08:54:09 2019 kern.err kernel: [ 9.608455] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
Fri Mar 8 08:54:09 2019 kern.info kernel: [ 9.608759] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003900ff sub 0000:0000
Fri Mar 8 08:54:09 2019 kern.info kernel: [ 9.616418] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
Fri Mar 8 08:54:09 2019 kern.info kernel: [ 9.629046] ath10k_ahb a800000.wifi: firmware ver 10.4b-ct-4019-fW-012-38a5514c api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT crc32 0da99c33
Fri Mar 8 08:54:09 2019 kern.info kernel: [ 9.678446] ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:21 crc32 035c0037
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 10.992571] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
Fri Mar 8 08:54:09 2019 kern.warn kernel: [ 10.992612] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
Fri Mar 8 08:54:09 2019 kern.info kernel: [ 11.041941] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
Fri Mar 8 08:54:09 2019 kern.info kernel: [ 11.042320] ath10k_ahb a800000.wifi: wmi print 'free: 56696 iram: 22168 sram: 35968'
Fri Mar 8 08:54:09 2019 kern.info kernel: [ 11.208068] ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
Fri Mar 8 08:54:09 2019 kern.debug kernel: [ 11.284022] ath: EEPROM regdomain: 0x0
Fri Mar 8 08:54:09 2019 kern.debug kernel: [ 11.284035] ath: EEPROM indicates default country code should be used
Fri Mar 8 08:54:09 2019 kern.debug kernel: [ 11.284040] ath: doing EEPROM country->regdmn map search
Fri Mar 8 08:54:09 2019 kern.debug kernel: [ 11.284049] ath: country maps to regdmn code: 0x3a
Fri Mar 8 08:54:09 2019 kern.debug kernel: [ 11.284057] ath: Country alpha2 being used: US
Fri Mar 8 08:54:09 2019 kern.debug kernel: [ 11.284062] ath: Regpair used: 0x3a
Fri Mar 8 08:54:09 2019 user.info kernel: [ 11.291220] kmodloader: done loading kernel modules from /etc/modules.d/*
Fri Mar 8 08:54:09 2019 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Fri Mar 8 08:54:09 2019 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Fri Mar 8 08:54:09 2019 daemon.info dnsmasq[678]: started, version 2.80 cachesize 150
Fri Mar 8 08:54:09 2019 daemon.info dnsmasq[678]: DNS service limited to local subnets
Fri Mar 8 08:54:09 2019 daemon.info dnsmasq[678]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Fri Mar 8 08:54:09 2019 daemon.info dnsmasq[678]: using local addresses only for domain test
Fri Mar 8 08:54:09 2019 daemon.info dnsmasq[678]: using local addresses only for domain onion
Fri Mar 8 08:54:09 2019 daemon.info dnsmasq[678]: using local addresses only for domain localhost
Fri Mar 8 08:54:09 2019 daemon.info dnsmasq[678]: using local addresses only for domain local
Fri Mar 8 08:54:09 2019 daemon.info dnsmasq[678]: using local addresses only for domain invalid
Fri Mar 8 08:54:09 2019 daemon.info dnsmasq[678]: using local addresses only for domain bind
Fri Mar 8 08:54:09 2019 daemon.info dnsmasq[678]: using local addresses only for domain lan
Fri Mar 8 08:54:09 2019 daemon.warn dnsmasq[678]: no servers found in /tmp/resolv.conf.auto, will retry
Fri Mar 8 08:54:09 2019 daemon.info dnsmasq[678]: read /etc/hosts - 4 addresses
Fri Mar 8 08:54:09 2019 daemon.info dnsmasq[678]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Fri Mar 8 08:54:10 2019 user.notice : Added device handler type: 8021ad
Fri Mar 8 08:54:10 2019 user.notice : Added device handler type: 8021q
Fri Mar 8 08:54:10 2019 user.notice : Added device handler type: macvlan
Fri Mar 8 08:54:10 2019 user.notice : Added device handler type: veth
Fri Mar 8 08:54:10 2019 user.notice : Added device handler type: bridge
Fri Mar 8 08:54:10 2019 user.notice : Added device handler type: Network device
Fri Mar 8 08:54:10 2019 user.notice : Added device handler type: tunnel
Fri Mar 8 08:54:10 2019 daemon.notice procd: /etc/init.d/network: 'radio0' is disabled
Fri Mar 8 08:54:10 2019 daemon.notice procd: /etc/init.d/network: 'radio1' is disabled
Fri Mar 8 08:54:10 2019 daemon.notice procd: /etc/init.d/network: 'radio0' is disabled
Fri Mar 8 08:54:10 2019 daemon.notice procd: /etc/init.d/network: 'radio1' is disabled
Fri Mar 8 08:54:11 2019 kern.info kernel: [ 13.799750] br-lan: port 1(eth0) entered blocking state
Fri Mar 8 08:54:11 2019 kern.info kernel: [ 13.799792] br-lan: port 1(eth0) entered disabled state
Fri Mar 8 08:54:11 2019 kern.info kernel: [ 13.804038] device eth0 entered promiscuous mode
Fri Mar 8 08:54:11 2019 daemon.notice netifd: Interface 'lan' is enabled
Fri Mar 8 08:54:11 2019 daemon.notice netifd: Interface 'lan' is setting up now
Fri Mar 8 08:54:11 2019 daemon.notice netifd: Interface 'lan' is now up
Fri Mar 8 08:54:11 2019 daemon.notice netifd: Interface 'loopback' is enabled
Fri Mar 8 08:54:11 2019 daemon.notice netifd: Interface 'loopback' is setting up now
Fri Mar 8 08:54:11 2019 daemon.notice netifd: Interface 'loopback' is now up
Fri Mar 8 08:54:11 2019 daemon.notice netifd: Interface 'wan' is enabled
Fri Mar 8 08:54:11 2019 daemon.notice netifd: Network device 'eth0' link is up
Fri Mar 8 08:54:11 2019 daemon.notice netifd: Network device 'lo' link is up
Fri Mar 8 08:54:11 2019 daemon.notice netifd: Interface 'loopback' has link connectivity
Fri Mar 8 08:54:11 2019 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Fri Mar 8 08:54:11 2019 daemon.info procd: - init complete -
Fri Mar 8 08:54:12 2019 daemon.notice netifd: bridge 'br-lan' link is up
Fri Mar 8 08:54:12 2019 daemon.notice netifd: Interface 'lan' has link connectivity
Fri Mar 8 08:54:12 2019 kern.info kernel: [ 14.809604] br-lan: port 1(eth0) entered blocking state
Fri Mar 8 08:54:12 2019 kern.info kernel: [ 14.809644] br-lan: port 1(eth0) entered forwarding state
Fri Mar 8 08:54:15 2019 authpriv.info dropbear[1100]: Not backgrounding
Fri Mar 8 08:54:17 2019 daemon.info dnsmasq[678]: exiting on receipt of SIGTERM
Fri Mar 8 08:54:17 2019 daemon.info dnsmasq[1139]: started, version 2.80 cachesize 150
Fri Mar 8 08:54:17 2019 daemon.info dnsmasq[1139]: DNS service limited to local subnets
Fri Mar 8 08:54:17 2019 daemon.info dnsmasq[1139]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Fri Mar 8 08:54:17 2019 daemon.info dnsmasq-dhcp[1139]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
......
Fri Mar 8 08:55:36 2019 kern.notice kernel: [ 99.039017] random: fast init done
Fri Mar 8 09:04:58 2019 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Fri Mar 8 09:04:58 2019 daemon.notice netifd: radio0 (1169): command failed: Not supported (-95)
Fri Mar 8 09:04:58 2019 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Fri Mar 8 09:04:59 2019 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Fri Mar 8 09:04:59 2019 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Fri Mar 8 09:04:59 2019 daemon.err hostapd: nl80211 driver initialization failed.
Fri Mar 8 09:04:59 2019 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->DISABLED
Fri Mar 8 09:04:59 2019 daemon.notice hostapd: wlan0: AP-DISABLED
Fri Mar 8 09:04:59 2019 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Fri Mar 8 09:04:59 2019 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started
Fri Mar 8 09:04:59 2019 daemon.notice netifd: radio0 (1169): cat: can't open '/var/run/wifi-phy0.pid': No such file or directory
Fri Mar 8 09:04:59 2019 daemon.notice netifd: radio0 (1169): WARNING (wireless_add_process): executable path /usr/sbin/wpad does not match process path (/proc/exe)
Fri Mar 8 09:04:59 2019 daemon.notice netifd: radio0 (1169): Command failed: Invalid argument
Fri Mar 8 09:04:59 2019 daemon.notice netifd: radio0 (1169): Device setup failed: HOSTAPD_START_FAILED
DMESG
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.105 (zoolan@zoolan-build-server) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r9508-c1a8054114)) #0 SMP Fri Mar 8 00:18:12 2019
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: iSigal CAP108 V1
[ 0.000000] Memory policy: Data cache writealloc
......
[ 0.659843] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 0.662969] m25p80 spi0.0: mx25l25635e (32768 Kbytes)
[ 0.669138] 9 fixed-partitions partitions found on MTD device spi0.0
[ 0.674076] Creating 9 MTD partitions on "spi0.0":
[ 0.680484] 0x000000000000-0x000000040000 : "0:SBL1"
[ 0.685698] 0x000000040000-0x000000060000 : "0:MIBIB"
[ 0.690792] 0x000000060000-0x0000000c0000 : "0:QSEE"
[ 0.695662] 0x0000000c0000-0x0000000d0000 : "0:CDT"
[ 0.700726] 0x0000000d0000-0x0000000e0000 : "0:DDRPARAMS"
[ 0.705295] 0x0000000e0000-0x0000000f0000 : "0:APPSBLENV"
[ 0.710901] 0x0000000f0000-0x000000170000 : "0:APPSBL"
[ 0.716222] 0x000000170000-0x000000180000 : "0:ART"
[ 0.721315] 0x000000180000-0x000002000000 : "firmware"
[ 0.726763] 2 fit-fw partitions found on MTD device firmware
[ 0.730745] Creating 2 MTD partitions on "firmware":
[ 0.736552] 0x000000000000-0x0000003c0000 : "kernel"
[ 0.742167] 0x000000400000-0x000001e80000 : "rootfs"
[ 0.746934] mtd: device 10 (rootfs) set to be root filesystem
[ 0.751565] 1 squashfs-split partitions found on MTD device rootfs
[ 0.757032] 0x000001280000-0x000001e80000 : "rootfs_data"
......
[ 6.902050] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/fwcfg-ahb-a000000.wifi.txt failed with error -2
[ 6.902100] ath10k_ahb a000000.wifi: Falling back to user helper
[ 6.943404] firmware ath10k!fwcfg-ahb-a000000.wifi.txt: firmware_loading_store: map pages failed
[ 6.943865] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/pre-cal-ahb-a000000.wifi.bin failed with error -2
[ 6.951334] ath10k_ahb a000000.wifi: Falling back to user helper
[ 7.046848] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/ct-firmware-5.bin failed with error -2
[ 7.046899] ath10k_ahb a000000.wifi: Falling back to user helper
[ 7.110332] firmware ath10k!QCA4019!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[ 7.110631] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/ct-firmware-2.bin failed with error -2
[ 7.118561] ath10k_ahb a000000.wifi: Falling back to user helper
[ 7.182600] firmware ath10k!QCA4019!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[ 7.183065] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/firmware-6.bin failed with error -2
[ 7.190879] ath10k_ahb a000000.wifi: Falling back to user helper
[ 7.254837] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 7.256738] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003900ff sub 0000:0000
[ 7.262799] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 7.276039] ath10k_ahb a000000.wifi: firmware ver 10.4b-ct-4019-fW-012-38a5514c api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT crc32 0da99c33
[ 7.325033] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:20 crc32 035c0037
[ 8.638976] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 8.639027] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
[ 8.686270] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 8.687681] ath10k_ahb a000000.wifi: wmi print 'free: 56696 iram: 22168 sram: 35968'
[ 8.853830] ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 8.932974] ath: EEPROM regdomain: 0x0
[ 8.932983] ath: EEPROM indicates default country code should be used
[ 8.932987] ath: doing EEPROM country->regdmn map search
[ 8.932994] ath: country maps to regdmn code: 0x3a
[ 8.933000] ath: Country alpha2 being used: US
[ 8.933003] ath: Regpair used: 0x3a
[ 9.112413] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/fwcfg-ahb-a800000.wifi.txt failed with error -2
[ 9.112471] ath10k_ahb a800000.wifi: Falling back to user helper
[ 9.275555] firmware ath10k!fwcfg-ahb-a800000.wifi.txt: firmware_loading_store: map pages failed
[ 9.275910] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/pre-cal-ahb-a800000.wifi.bin failed with error -2
[ 9.283513] ath10k_ahb a800000.wifi: Falling back to user helper
[ 9.400716] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/ct-firmware-5.bin failed with error -2
[ 9.400768] ath10k_ahb a800000.wifi: Falling back to user helper
[ 9.460805] firmware ath10k!QCA4019!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[ 9.461176] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/ct-firmware-2.bin failed with error -2
[ 9.469032] ath10k_ahb a800000.wifi: Falling back to user helper
[ 9.526752] firmware ath10k!QCA4019!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[ 9.527140] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/firmware-6.bin failed with error -2
[ 9.535061] ath10k_ahb a800000.wifi: Falling back to user helper
[ 9.608455] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 9.608759] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003900ff sub 0000:0000
[ 9.616418] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 9.629046] ath10k_ahb a800000.wifi: firmware ver 10.4b-ct-4019-fW-012-38a5514c api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT crc32 0da99c33
[ 9.678446] ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:21 crc32 035c0037
[ 10.992571] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 10.992612] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
[ 11.041941] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 11.042320] ath10k_ahb a800000.wifi: wmi print 'free: 56696 iram: 22168 sram: 35968'
[ 11.208068] ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 11.284022] ath: EEPROM regdomain: 0x0
[ 11.284035] ath: EEPROM indicates default country code should be used
[ 11.284040] ath: doing EEPROM country->regdmn map search
[ 11.284049] ath: country maps to regdmn code: 0x3a
[ 11.284057] ath: Country alpha2 being used: US
[ 11.284062] ath: Regpair used: 0x3a
LOG of wifi up
root@OpenWrt:/# wifi up
root@OpenWrt:/# [ 181.743144] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 181.743190] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
[ 181.790100] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 181.791057] ath10k_ahb a800000.wifi: wmi print 'free: 56696 iram: 22168 sram: 35968'
[ 182.087636] ath10k_ahb a800000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 182.102154] br-lan: port 2(wlan1) entered blocking state
[ 182.102190] br-lan: port 2(wlan1) entered disabled state
[ 182.106789] device wlan1 entered promiscuous mode
[ 182.434260] ath10k_ahb a800000.wifi: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
[ 182.632980] br-lan: port 2(wlan1) entered blocking state
[ 182.633023] br-lan: port 2(wlan1) entered forwarding state
[ 192.799743] device wlan1 left promiscuous mode
[ 192.799877] br-lan: port 2(wlan1) entered disabled state
[ 192.901623] ath10k_ahb a800000.wifi: peer-unmap-event: unknown peer id 0
[ 194.803465] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 194.803516] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
[ 194.851416] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 194.852851] ath10k_ahb a800000.wifi: wmi print 'free: 56696 iram: 22168 sram: 35968'
[ 195.158563] ath10k_ahb a800000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 195.165490] br-lan: port 2(wlan1) entered blocking state
[ 195.168634] br-lan: port 2(wlan1) entered disabled state
[ 195.174494] device wlan1 entered promiscuous mode
[ 195.711614] br-lan: port 2(wlan1) entered blocking state
[ 195.711663] br-lan: port 2(wlan1) entered forwarding state