OpenWrt Forum Archive

Topic: Openwrt on Livebox mini ?

The content of this topic has been archived on 7 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Hi,

Any one working on Openwrt for Livebox Mini (Sagem version with Ikanos vx-160) ?

Here is bootlog from console :

regards

Benoit

------------------
SAGEM Secure-boot v2.4 for ADI chipset



CPU: ADI Fusiv 160 Family

DRAM:  64 MB

Flash: 16 MB

Using default environment



In:    serial

Out:   serial

Err:   serial

voxEmac

good regular firmware

partition not moved

Launch regular code from flash

## Booting image at bf7c0140 ...

   Image Name:   adi_kernel_2.6

   Created:      2008-01-10  14:33:55 UTC

   Image Type:   MIPS Linux Kernel Image (gzip compressed)

   Data Size:    1483161 Bytes =  1.4 MB

   Load Address: 80010000

   Entry Point:  80379000

   Verifying Checksum ... OK

   Uncompressing Kernel Image ... OK



Starting kernel ...



Linux version 2.6.12.6 (gardnerk@cplx147.edegem.eu.thmulti.com) (gcc version 3.4.3) #1 Thu Jan 10 15:33:46 CET 2008

CPU revision is: 6836c400

Determined physical RAM map:

memory: 00001000 @ 00000000 (usable)

memory: 00001000 @ 00001000 (reserved)

memory: 03ffe000 @ 00002000 (usable)

Initial ramdisk at: 0x80000000 (0 bytes)

Built 1 zonelists

Kernel command line: root=/dev/mtdblock6 ro rootfstype=squashfs operational_start=0xbf7c0000 rescue_start=0xbf120000 myfs_start=0xbf940000 type=operational

Primary instruction cache 16kB, linesize 32 bytes.

Primary data cache 8kB, linesize 32 bytes.

Synthesized TLB refill handler (17 instructions).

Synthesized TLB load handler fastpath (31 instructions).

Synthesized TLB store handler fastpath (31 instructions).

Synthesized TLB modify handler fastpath (25 instructions).

PID hash table entries: 512 (order: 9, 8192 bytes)

Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)

Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)

Memory: 60288k/65532k available (2769k kernel code, 5148k reserved, 719k data, 136k init, 0k highmem)

Mount-cache hash table entries: 512

Checking for 'wait' instruction...  unavailable.

checking if image is initramfs... it is

NET: Registered protocol family 16

Fusiv PCI: starting...

SCSI subsystem initialized

usbcore: registered new driver usbfs

usbcore: registered new driver hub

Bluetooth: Core ver 2.7

NET: Registered protocol family 31

Bluetooth: HCI device and connection manager initialized

Bluetooth: HCI socket layer initialized

squashfs: version 3.1 (2006/08/19) Phillip Lougher

devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.

Initializing Cryptographic API

Serial: 8250/16550 driver $Revision: 2.1 $ 2 ports, IRQ sharing disabled

ttyS0 at MMIO 0xb9020000 (irq = 6) is a 16450

io scheduler noop registered

RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize

PPP generic driver version 2.4.2

NET: Registered protocol family 24

On Board flash device: 0x1000000 at 0x1f000000

Number of erase regions: 1

Primary Vendor Command Set: 0002 (AMD/Fujitsu Standard)

Primary Algorithm Table at 0040

Alternative Vendor Command Set: 0000 (None)

No Alternate Algorithm Table

Vcc Minimum:  2.7 V

Vcc Maximum:  3.6 V

No Vpp line

Typical byte/word write timeout: 128 µs

Maximum byte/word write timeout: 1024 µs

Typical full buffer write timeout: 128 µs

Maximum full buffer write timeout: 4096 µs

Typical block erase timeout: 1024 ms

Maximum block erase timeout: 16384 ms

Chip erase not supported

Device size: 0x1000000 bytes (16 MiB)

Flash Device Interface description: 0x0002

  - supports x8 and x16 via BYTE# with asynchronous interface

Max. bytes in buffer write: 0x20

Number of Erase Block Regions: 1

  Erase Region #0: BlockSize 0x20000 bytes, 128 blocks

ADI flash: Found 1 x16 devices at 0x0 in 16-bit bank

Amd/Fujitsu Extended Query Table at 0x0040

ADI flash: CFI does not contain boot bank location. Assuming top.

number of CFI chips: 1

cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.

Creating 6 MTD partitions on "ADI flash":

0x00000000-0x00020000 : "Bootloader Partition"

0x00020000-0x00040000 : "Factory Partition"

0x00040000-0x00120000 : "User Partition"

0x00120000-0x007c0000 : "Rescue FW"

0x007c0000-0x00940000 : "Operational FW"

0x00940000-0x01000000 : "Squashfs RootFS"

vox160-ehci-hcd vox160-ehci-hcd.0: EHCI Host Controller

vox160-ehci-hcd vox160-ehci-hcd.0: new USB bus registered, assigned bus number 1

vox160-ehci-hcd vox160-ehci-hcd.0: irq 35, io mem 0x19230000

vox160-ehci-hcd vox160-ehci-hcd.0: park 0

vox160-ehci-hcd vox160-ehci-hcd.0: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 1 port detected

vox160-ohci-hcd vox160-ohci-hcd.0: ADI VOX160 OHCI

vox160-ohci-hcd vox160-ohci-hcd.0: new USB bus registered, assigned bus number 2

vox160-ohci-hcd vox160-ohci-hcd.0: irq 35, io mem 0x19240800

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 1 port detected

usbcore: registered new driver usblp

drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver

Initializing USB Mass Storage driver...

usbcore: registered new driver usb-storage

USB Mass Storage support registered.

Livebox Button API has been initialized

u32 classifier

    OLD policer on

NET: Registered protocol family 2

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP established hash table entries: 4096 (order: 3, 32768 bytes)

TCP bind hash table entries: 4096 (order: 2, 16384 bytes)

TCP: Hash tables configured (established 4096 bind 4096)

ip_conntrack version 2.1 (512 buckets, 4096 max) - 288 bytes per conntrack

ip_tables: (C) 2000-2002 Netfilter core team

NET: Registered protocol family 1

NET: Registered protocol family 10

IPv6 over IPv4 tunneling driver

NET: Registered protocol family 17

Ebtables v2.0 registered

NET: Registered protocol family 8

NET: Registered protocol family 20

802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>

All bugs added by David S. Miller <davem@redhat.com>

Relay Driver Starting...

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 136k freed



SYSINIT



LIVEBOX version : 6.3.8.4



Mounting proc filesystem ...

Mounting usb filesystem...

Mounting tmpfs filesystem (/var) ...

Mounting tmpfs filesystem (/tmp) ...

Mounting devpts filesystem (/dev/pts) ...

fusivlib_lkm: module license 'proprietary' taints kernel.

fusiv library initializing...



fusiv library initialized SUCCESSFULLY...



Added AP PREROUTE Hook

Added AP POSTROUTE Hook

Buffer Manager is initializing...

Slave Mem Alloc: Req size 16   Ptr2Block 0x191f0000

Load into BM APU Successful !!!



Timers are getting initalized


Timers are initilized SUCCESSFULLY...

Slave Mem Alloc: Req size 16   Ptr2Block 0x191f0010

Slave Mem Alloc: Req size 16   Ptr2Block 0x191f0020



Ethernet Driver is initialized SUCCESSFULLY

Slave Mem Alloc: Req size 8   Ptr2Block 0x191f0030

Slave Mem Alloc: Req size 72   Ptr2Block 0x191f0038

Slave Mem Alloc: Req size 120   Ptr2Block 0x191f0080

Slave Mem Alloc: Req size 192   Ptr2Block 0x191f00f8

Slave Mem Alloc: Req size 256   Ptr2Block 0x191f01b8



ATM Driver Initialized SUCCESSFULLY...

periApDriverInit: doneSlave Mem Alloc: Req size 16   Ptr2Block 0x191f02b8




*******LOAD firmware to AP:PERI_ID result:0Load into PERI_AP APU Successful !!!



> NORMAL BOOT <





> BOOT SYSTEM <



Mounting other filesystems ...

Switching to RUNLEVEL 1 ...

*********************** Starting script /etc/rc1.d/S03firewall at: 7.87 1.46

*********************** Starting script /etc/rc1.d/S03nat at: 8.90 1.46

*********************** Starting script /etc/rc1.d/S04adsl at: 9.31 1.46

adsl start ...

ADSL Starting ...

Resetting adsl DSP

*********************** Starting script /etc/rc1.d/S05hardware at: 10.61 1.46

No LED/Buttons support...

Starting ATH WLAN...

wlan: 0.8.4.2 (Atheros/multi-bss)

ath_hal: 0.9.17.1 (AR5212, RF5111, RF5112, RF2413, RF5413)

ath_rate_atheros: Version 2.0.1

Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved

ath_dfs: Version 2.0.0

Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved

ath_pci: 0.9.4.5 (Atheros/multi-bss)

PCI: Enabling device 0000:00:01.0 (0000 -> 0002)

ath_attach: Fast Path Test Code Compiled Jan 10 2008 15:45:01

ar5212SetResetReg: set to big endian

Setting ah_eepromDetach

**** Going to ath_hal_readEepromIntoDataset

wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps

wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps

wifi0: mac 7.8 phy 4.5 radio 5.6

wifi0: Use hw queue 1 for WME_AC_BE traffic

wifi0: Use hw queue 0 for WME_AC_BK traffic

wifi0: Use hw queue 2 for WME_AC_VI traffic

wifi0: Use hw queue 3 for WME_AC_VO traffic

wifi0: Use hw queue 8 for CAB traffic

wifi0: Use hw queue 9 for beacons

wifi0: Atheros 5212: mem=0x1a000000, irq=25

wlan: mac acl policy registered

Dev Address: 00:1d:6a:xx:xx:xx

wl0

Dev Address: 06:1d:6a:xx:xx:xx

wl1

*********************** Starting script /etc/rc1.d/S15syslogd at: 20.29 1.46

*********************** Starting script /etc/rc1.d/S16voice1 at: 20.59 1.46

Voice part 1 start ...

*********************** Starting script /etc/rc1.d/S20network at: 20.80 1.46

Local network configuration ...

Ethernet network configuration ...

Hostname configuration : LIVEBOX

*********************** Starting script /etc/rc1.d/S22gatewayd at: 22.25 1.46

loading geniodb kernel modules...

Thomson geniodb driver: Loading ...

Thomson geniodb driver: Loading finished with SUCCESS

gatewayd start ...

Warning: ripData not initialized. Calling hco_rip_init() first!

wait for gatewayd to initialise (1)

wait for gatewayd to initialise (2)

Lock created on /var/run/mbusd_system pid:785


Lock created on /var/run/mbusd pid:786


Lock created on /var/run/mbusd_atomic pid:786


[ADSL PLUGIN] Plugin 'DSL_MBUS' Plugin successfully registerd !


[ADSL PLUGIN] Plugin 'DSL_MBUS' Successfully registered !


[ADSL PLUGIN] Plugin 'DSL_MBUS' ADSL API device char successfully open!


[ADSL PLUGIN] Plugin 'DSL_MBUS' Successfully registered !


Starting to monitor the gatewayd process...

wait for gatewayd to initialise (3)

Warning: ripData not initialized. Calling hco_rip_init() first!

wait until stage >= 71 (current stage=22)


End of initialisation


wait until stage >= 60 (current stage=22)


*********************** Starting script /etc/rc1.d/S23qos at: 34.60 1.46

wait until stage >= 71 (current stage=23)


wait until stage >= 60 (current stage=23)


*********************** Starting script /etc/rc1.d/S24resolvd at: 36.02 1.46

Resolv daemon start ...

wait until stage >= 71 (current stage=24)


wait until stage >= 60 (current stage=24)


*********************** Starting script /etc/rc1.d/S40nlplugd at: 36.77 1.46

wait until stage >= 71 (current stage=40)


wait until stage >= 60 (current stage=40)


nlplugd start ...

Initializing.


Lock file '/var/run/mbusd_atomic' exists and is locked.


Starting netlink plugin


Lock created on /var/run/NL_PLUGIN_MBUS pid:921


Daemonize netlink plugin





*********************** Starting script /etc/rc1.d/S41iptplugd at: 37.62 1.46

iptplugd start ...

Lock created on /var/run/IPT_PLUGIN_MBUS pid:935


Daemonize iptables plugin





wait until stage >= 71 (current stage=42)


*********************** Starting script /etc/rc1.d/S42mbus_wland at: 38.21 1.46

wait until stage >= 60 (current stage=42)


MBUS start: ath_wland

Lock created on /var/run/NL_PLUGIN_MBUS pid:923


Lock created on /var/run/WLAN pid:951


ar5212SetResetReg: set to big endian

ar5212SetResetReg: set to big endian

Warning: ripData not initialized. Calling hco_rip_init() first!

*********************** Starting script /etc/rc1.d/S45dhccd at: 38.86 1.46

dhccd start ...

Lock created on /var/run/IPT_PLUGIN_MBUS pid:937


wait until stage >= 71 (current stage=45)


wait until stage >= 60 (current stage=45)


*********************** Starting script /etc/rc1.d/S650atomicstopload at: 39.37 1.46

wait until configuration load reaches phase 5 (now -1, 1s)

wait until stage >= 71 (current stage=65)


stage 60 reached (current stage=65)


appbox: start loading after [  6080ms ]


stage 60 reached (current stage=65)


stage 61 reached (current stage=65)


wait until stage >= 71 (current stage=65)


wait until stage >= 71 (current stage=65)


wait until stage >= 71 (current stage=65)


stage 62 reached (current stage=65)


stage 63 reached (current stage=65)


wait until stage >= 71 (current stage=65)


wait until stage >= 71 (current stage=65)


wait until stage >= 71 (current stage=65)


wait until stage >= 71 (current stage=65)


stage 64 reached (current stage=65)


wait until stage >= 71 (current stage=65)


ar5212SetResetReg: set to big endian

ar5212SetResetReg: set to big endian

ar5212SetResetReg: set to big endian

wait until stage >= 71 (current stage=65)


wait until configuration load reaches phase 5 (now 4, 2s)

QOS: vpi 8 vci 35


wait until stage >= 71 (current stage=65)


QOS: vpi 8 vci 38


QOS: vpi 8 vci 39


QOS: vpi 8 vci 40


QOS: vpi 8 vci 41


wait until stage >= 71 (current stage=65)


wait until stage >= 71 (current stage=65)


QOS: vpi 8 vci 50


QOS: vpi 8 vci 51


wait until stage >= 71 (current stage=65)


wait until stage >= 71 (current stage=65)


device eth0 entered promiscuous mode

bridge: port 1(eth0) entering learning state

bridge: topology change detected, propagating

bridge: port 1(eth0) entering forwarding state

device wl0 entered promiscuous mode

bridge: port 2(wl0) entering learning state

bridge: topology change detected, propagating

bridge: port 2(wl0) entering forwarding state

device eth1 entered promiscuous mode

bridge: port 3(eth1) entering learning state

bridge: topology change detected, propagating

bridge: port 3(eth1) entering forwarding state

wait until stage >= 71 (current stage=65)


wait until stage >= 71 (current stage=65)


wait until stage >= 71 (current stage=65)


wait until stage >= 71 (current stage=65)


wait until stage >= 71 (current stage=65)


wait until stage >= 71 (current stage=65)


stage 65 reached (current stage=65)


wait until stage >= 71 (current stage=65)


wait until stage >= 66 (current stage=65)


Configuration file: /tmp/hostapd.conf.0

*********************** Starting script /etc/rc1.d/S651usb-host at: 72.82 1.84

bridge: port 2(wl0) entering disabled state

Using interface wl0 with hwaddr 00:1d:6a:xx:xx:xx and ssid 'Livebox-yyzz'

wait until stage >= 71 (current stage=65)


wait until stage >= 66 (current stage=65)


wait until stage >= 71 (current stage=65)


wait until stage >= 66 (current stage=65)


wl0: RADIUS Authentication sar5212SetResetReg: set to big endian

erver 127.0.0.1:1812

bridge: port 2(wl0) entering learning state

bridge: topology change detected, propagating

bridge: port 2(wl0) entering forwarding state

Flushing old station entries

Deauthenticate all stations

wait until stage >= 66 (current stage=65)


wait until stage >= 71 (current stage=65)


wait until stage >= 66 (current stage=65)


wait until stage >= 71 (current stage=65)


wait until stage >= 66 (current stage=65)


wait until stage >= 71 (current stage=65)


wait until stage >= 66 (current stage=65)


wait until stage >= 71 (current stage=65)


wait until stage >= 66 (current stage=65)


wait until stage >= 71 (current stage=65)


wait until stage >= 66 (current stage=65)


wait until stage >= 71 (current stage=65)


usbmgr[1285]: start 0.4.8

usbmgr[1285]: sleep time -1 micro sec



Name: /etc/usbmgr/usbmgr.conf

Load_from_file: /etc/usbmgr/preload.conf

wait until stage >= 66 (current stage=65)


usbmgr[1287]: [USB_MBUS]Plugin 'USB_MBUS' successfully registered!




usbmgr[1287]: [USB_MBUS]succeed to create listening thread




Lock created on /var/run/USB_MBUS pid:1295


wait until stage >= 71 (current stage=65)


wait until stage >= 66 (current stage=65)


wait until stage >= 71 (current stage=65)


usbmgr[1287]: buffer line: remove T

usbmgr[1287]: class:0x9 subclass:0x0 protocol:0x0

usbmgr[1287]: try /etc/usbmgr/class/09/00/00/module

usbmgr[1287]: try /etc/usbmgr/class/09/00/module

usbmgr[1287]: try /etc/usbmgr/class/09/module

usbmgr[1287]: try /etc/usbmgr/class/module

usbmgr[1287]: USB device isn't matched the configuration

usbmgr[1287]: buffer line: remove T

*********************** Starting script /etc/rc1.d/S65devdiscd at: 83.01 6.45

Device Discovery start ...

wait until stage >= 66 (current stage=65)


wait until stage >= 71 (current stage=65)


wait until stage >= 66 (current stage=65)


wait until stage >= 71 (current stage=65)


devdiscd: Daemonized with blocked parent process


wait until stage >= 66 (current stage=65)


wait until stage >= 71 (current stage=65)


wait until stage >= 66 (current stage=65)


devdiscd: Parent process released.

*********************** Starting script /etc/rc1.d/S65ezpFTplugin at: 86.54 7.44

Starting EasyPairingPlugin

wait until stage >= 71 (current stage=65)


Initializing.

Registering metadata to mbusd.

Finished (no error).

wait until stage >= 66 (current stage=65)


*********************** Starting script /etc/rc1.d/S65fwupdate at: 87.47 7.44

FW Update daemon (Karma) start ...

wait until stage >= 71 (current stage=65)


Livebox2 Firmware Upgrade Client

Copyright Thomson Telecom Belgium - 2006

-II- fwupdated daemonizing..

wait until stage >= 66 (current stage=65)


wait until stage >= 71 (current stage=65)


*********************** Starting script /etc/rc1.d/S65network2 at: 88.43 7.44

Ethernet network configuration ...

wait until stage >= 66 (current stage=65)


wait until stage >= 71 (current stage=65)


*********************** Starting script /etc/rc1.d/S65todd at: 90.12 7.44

Timeofday start ...

wait until stage >= 66 (current stage=65)


[TOD MAIN] Initializing.


[TOD MAIN] Initialization successful.


[TOD MAIN] daemonizing..


wait until stage >= 71 (current stage=65)


wait until stage >= 66 (current stage=65)


wait until stage >= 71 (current stage=65)


Lock file '/var/run/mbusd_atomic' exists and is locked.


Lock file '/var/run/mbusd_atomic' exists and is locked.


Lock created on /var/run/tod_plugin pid:1379


wait until stage >= 66 (current stage=65)


wait until stage >= 71 (current stage=65)


wait until stage >= 71 (current stage=65)


*********************** Starting script /etc/rc1.d/S70stopload at: 93.29 7.44

stage 66 reached (current stage=70)


wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


wait until configuration load reaches phase 10 (now 6, 1s)

wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


stage 67 reached (current stage=70)


wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


wait until configuration load reaches phase 10 (now 7, 2s)

wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


wait until configuration load reaches phase 10 (now 7, 3s)

wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


orange hostname: xxxxx.mobile.orange.fr

[p2] generate_wifi_hotspot_id

[p2] generate_wifi_hotspot_id:

[p2] looking for lac orange, 0x10005468

[p2] lac orangebis, 0x10005468

[p2] lac orange, 0x10005208

[p2] looking for lac orangebis, 0x10005468

[p2] lac orangebis, 0x10005468

port 1701

This binary does not support kernel L2TP.

l2tpd version 0.69 started on LIVEBOX PID:1457

Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc.

Forked by Scott Balmos and David Stipp, (C) 2001

Inhereted by Jeff McAdams, (C) 2002

Linux version 2.6.12.6 on a mips, port 1701

wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


info, Moreton Bay DHCP Server (v0.1) started

ENTERING this function, server_state_machine_init

info, TODO IMPORTANT : liberer la memoire utilisee par les options.

ENTERING this function, radius_init_server

info, Attaching option domain to list

info, Attaching option lease to list

info, Utilisation du fichier de pid : /var/run/wacd.pid

debug, ESSID : communaute-livebox, res : 18

[p2] ESSID : communaute-livebox, res : 18[p2] radius acct: 0x10003068

[p2] radius acct server: yyyyyy.mobile.orange.fr

stage 68 reached (current stage=70)


stage 70 reached (current stage=70)


wait until stage >= 71 (current stage=70)


appbox: end loading


wait until stage >= 71 (current stage=70)


Upnp init ...

wait until stage >= 71 (current stage=70)


MyConfig in /etc/upnp.conf:

    Debug=0

    descDocName: gatedesc.xml

    xmlPath: /var

    g_iptables: /usr/sbin/iptables

    g_forwardChainName: upnp

    g_preroutingChainName: upnp

    g_upstreamBitrate: 0

    g_downstreamBitrate: 0



retrieving the address

creating a socket

performing the SIOCGIFADDR ioctl

found ifaddr '192.168.1.1' for bridge

creating pid file

wait until stage >= 71 (current stage=70)


Lock created on /var/run/UPnP pid:1496


wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


INFO : IGD root device successfully registered.

wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


device atm_1 entered promiscuous mode

bridge_0: port 1(atm_1) entering learning state

bridge_0: topology change detected, propagating

bridge_0: port 1(atm_1) entering forwarding state

wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


device atm_2 entered promiscuous mode

bridge_0: port 2(atm_2) entering learning state

bridge_0: topology change detected, propagating

bridge_0: port 2(atm_2) entering forwarding state

wait until stage >= 71 (current stage=70)


wait until stage >= 71 (current stage=70)


*********************** Starting script /etc/rc1.d/S72hostmgr at: 119.55 7.44

INFO : Advertisements Sent.  Listening for requests ...

stage 71 reached (current stage=72)


device atm_3 entered promiscuous mode

bridge_0: port 3(atm_3) entering learning state

bridge_0: topology change detected, propagating

bridge_0: port 3(atm_3) entering forwarding state

stage 71 reached (current stage=72)


device atm_4 entered promiscuous mode

bridge_0: port 4(atm_4) entering learning state

bridge_0: topology change detected, propagating

bridge_0: port 4(atm_4) entering forwarding state

device eth1 left promiscuous mode

bridge: port 3(eth1) entering disabled state

br_del_if() : is called with apId 2

hostmgr start ...

device eth1 entered promiscuous mode

bridge_0: port 5(eth1) entering learning state

bridge_0: topology change detected, propagating

bridge_0: port 5(eth1) entering forwarding state

Lock created on /var/run/Hostmanager pid:1539


*********************** Starting script /etc/rc1.d/S75appweb at: 127.48 7.44

Starting appWeb

*********************** Starting script /etc/rc1.d/S76dslupd at: 131.48 7.44

Dslupdate start ...

Lock created on /var/run/ATMQOS pid:1565


*********************** Starting script /etc/rc1.d/S77tppp at: 134.57 7.44

tppp start ...

Lock created on /var/run/TPPP pid:1593


Lock created on /var/run/TPPP_IGD pid:1593


*********************** Starting script /etc/rc1.d/S80telnetd at: 138.70 7.44

telnetd start ...

*********************** Starting script /etc/rc1.d/S81ezp_ctl at: 139.39 7.44

EasyPairing Management Deamon start: ezpairingctl

Lock created on /var/run/ezp_atom pid:1614


*********************** Starting script /etc/rc1.d/S90wacd-wifi-community at: 140.38 7.44

WacD is still started with pid 1462

Exiting /etc/rc1.d/S90wacd-wifi-community

*********************** Starting script /etc/rc1.d/S98pwrledstop at: 141.52 7.44

pwrledstart stop ...

debug, RADIUS_S_ADDR FAILED : xxxxx.mobile.orange.fr

[p2] radius access: 0x10003080

[p2] primary radius access server: yyyyy.mobile.orange.fr

wl0 enabled

*********************** Starting script /etc/rc1.d/S98voice2 at: 142.87 7.44

Voice part 2 start ...

creating nodes

loading module



##################################################

# DSP Voice Module Part 1 Loading ...





Using: Software Build(voice_2_6 : Thu Dec  8 10:33:40 PST 2005)



# DSP Voice Module Part 1 Loading Ok

##################################################





##################################################

# RTP Stack Module Loading ...



Register /dev/rtp Device ... OK

Init Mutex, WaitQueue, Events List ... OK

Init RTP Pool List session ... OK

Allocate RTP SLAB session [min(1) size(1040)] ... OK

Allocate RTP Element session [nb(10) size(20)] ... 0 1 2 3 4 5 6 7 8 9 OK

Register to DSP ... OK



# RTP Stack Module Loading Ok

##################################################



Loading module usb-dect



##################################################

# Generate Voice Module Loading ...



Register to DSP ... OK



# Generate Voice Module Loading Ok

##################################################





##################################################

# DECT Upper Module Loading ...



Init Base Device:

    Init File Operator, Callbacks, Parameters ... OK

Init Voice Device:

    Init Mutex, List, WaitQueue, Cdev, Parameters ... OK

    Add Cdev ... OK

    Init Channel/Handset ... (0/0) (1/1) (2/2) (3/4) (4/8) (5/16) (6/32) (7/64) OK

Init Ctrl Device:

    Init Mutex, Cdev, Parameters ... OK

    Add Cdev ... OK



# DECT Upper Module Loading Ok

##################################################





##################################################

# DECT Extended HID Module Loading ...



Init HID Device ... OK

USB Register ...

usbcore: registered new driver usbhid

/vobs/dbw/5g/system/usbdect/sagem/usb-dect/D45WB-2-6/hid-core/hid-core.c: v2.01:USB HID core driver

---> OK



# DECT Extended HID Module Loading Ok

##################################################





##################################################

# DECT Lower Version(20060731-1540-2.6)    Module Loading ...



Init driver ... OK

Register to Extended HID ... OK

Register to USB ...

usbcore: registered new driver sagem dect

---> OK



# DECT Lower Module Loading Ok

##################################################



libep_FXS_c

on##################################################

st# DSP Voice Module Part 2 Loading ...



ructCould not find DSP configuration file, setting to defaults

orSave and reboot the system to effect the Codec Mode : 2

: Save and reboot the system to effect the Codec Mode : 2

BegiSave and reboot the system to effect the Codec Mode : 2

n
Save and reboot the system to effect the Codec Mode : 2


libep_FXS_constructor: End

libep_constructor: Begin

libep_constructor[FXS]: Allocated memory driver_libep(0x101b1530)

libep_constructor[FXS]: Allocated memory libep(0x101aaa98)

libep_constructor[FXS]: Type driver(0)

Total words found in /dsp/dsp218x_1ch_faxonly.dsp Image 31948

Total words found in /dsp/dsp218x_1ch_g723only.dsp Image 31948

Total words found in /dsp/dsp218x_1ch_g729only.dsp Image 31948

Total words found in /dsp/dsp218x_1ch_3wayonly.dsp Image 31948



Registering Call Back Handlers

get buffer c046e000

Setting path=Voice, param=StartDriver, value=1 successfully!




DSP TIME SLOT Assigned:260


DSP CLock Assigned:22


DSP Codec Type  Assigned:2


DSP TIME SLOT Assigned:40


DSP CLock Assigned:22


DSP Codec Type  Assigned:2


ADSP218x DOWNLOAD DONE !!!!




DSP Ver No:1.1 



Initializing SLIC and VOICE Wait Queues



Initializing Voice

Initializing SPI Module

Product Code: ff ff

Assuming SLIC card as SILABS

Initializing SLICs

SLIC Initializaton for Silabs on VX160 Platform

Codec[0] => Chip Type [0]  Chip Version [3]



VBAT Calibration = 0xB7




vBat Power Leak Test = 0x23




VBAT Calibration = 0xBA


*********************** Starting script /etc/rc1.d/S99gwmonit at: 151.70 7.44

Stop monitoring the gatewayd process...



RING Gain Calibration OK.




TIP Gain Calibration OK.


Size : 33



End of SI3216 Initialization. codecNo 0


SLIC Initializaton for Silabs on VX160 Platform




UNABLE TO COMMUNICATE WITH SI3216. codecNo 1


FXO Initialized Successfully

Activate SLICs => 2

osAssignInterrupt: Enable IRQ(17) for DSP



Enable IRQ for DSP

osAssignInterrupt: Enable IRQ(21) for DSP



Enable IRQ for DSP



DSP System Initialized Successfully



# DSP Voice Module Part 2 Loading Ok

##################################################



libep_constructor[FXS]: Open /dev/dsp

libep_constructor: DRIVER_LEP_FLAGS [ set DEV_OPEN]

libep_constructor: DRIVER_LEP_FLAGS [ DEV_OPEN, set INDEX_INIT]

libep_constructor: End

driver_libep_cnf: Begin

driver_libep_cnf-201: (STACK->DRIVER-FXS: LEP_CNF_LOG] LidectUpper_devOpen: OPEN voice(c0360600) device

bepdectUpper_devOpen: Insert DECT_GLOBAL_INIT_DONE EVENT

(0xdectUpper_sendEvt: Send On First Event(0) on dev voice(c0360600)

101aaa98dectUpper_devOpen: OPEN ctrl(c0361ec0) device

) -> Not implemented yet

driver_libep_cnf: Begin

driver_libedectUpper_devRead: READ on voice(c0360600) device

p_cdectUpper_devRead: Extract event(0)

nf(0x101aaa98): [STACK->DRIVER-FXS: LEP_CNF_COUNTRY]

driver_libep_cnf: COUNTRY FR

driver_libep_cnf(0x101aaa98): DRIVER->DEV: [ DSP_SET_COUNTRYOPT ] country(0)

driver_libep_cnf: End

driver_libep_init: Begin

driver_libep_init: DRIVER_LEP_FLAGS [ DEV_OPEN, INDEX_INIT, set INITIALIZE]

driver_libep_init[FXS]: Initialize FXS for channel(0) on libep(0x101aaa98)

driver_ep_init: Begin

driver_ep_init[FXS]: Allocated memory driver_rtp(0x101afd90)

driver_ep_init[FXS]: Allocated memory driver_ep(0x101b0180)

driver_ep_init[FXS]: Allocated memory Ep(0x101ba600)

driver_default_ep_fxs_audio: Begin

driver_default_ep_fxs_audio[FXS:CHANNEL_0]: Allocated memory audio_fxs(0x101b1378)

driver_default_ep_fxs_audio: channel(0) Vad(0) Plc(1) Ec(1) Gain(0)

driver_default_ep_fxs_audio: encoder[ dtmf_det(1) codec(2) dtmf_rej(1) g168(1) g168TailLen(80) ]

driver_default_ep_fxs_audio: decoder[ codec(2) ton_gen(1) ]

driver_default_ep_fxs_audio: End

driver_ep_init[FXS]: Register EP(0x101ba600)

driver_ep_cnf: Begin

driver_ep_cnf(0x101ba600): [STACK->DRIVER-FXS: EP_CNF_LINK_MODE] with link_mode(1)

driver_ep_cnf: Link_mode(1) MODE_NORMAL

driver_ep_cnf: End

driver_ep_init: DRIVER-EP-SIG-FLAGS [ set REGISTER_EP]

driver_ep_init: End

driver_libep_init: DRIVER_LEP_FLAGS [ INITIALIZE, DEV_OPEN, INDEX_INIT, set USED]

driver_libep_init[FXS]: Register FD(68)

driver_libep_init: DRIVER_LEP_FLAGS [ INITIALIZE, USED, DEV_OPEN, INDEX_INIT, set REGISTER_FD]

driver_libep_init: End

driver_libep_cnf: Begin

driver_libep_cnf(0x101aaa98): [STACK->DRIVER-FXS: LEP_CNF_COUNTRY]

driver_libep_cnf: COUNTRY FR

driver_libep_cnf(0x101aaa98): DRIVER->DEV: [ DSP_SET_COUNTRYOPT ] country(0)

driver_libep_cnf: End

pstn_constructor: Begin

pstn_constructor: DRIVER-PSTN-FLAGS [ set INITIALIZE]

pstn_constructor-1376: Open /dev/fxo

pstn_constructor: DRIVER-PSTN-FLAGS [ INITIALIZE, set DEV_OPEN]

pstn_constructor: End

driver_pstn_init: Begin

driver_pstn_init: Register FD(67)

driver_pstn_init: DRIVER-PSTN-FLAGS [ INITIALIZE, DEV_OPEN, set REGISTER_FD]

driver_pstn_init: End

libep_DECT_constructor: Begin

libep_DECT_constructor: End

libep_constructor: Begin

libep_constructor[DECT]: Allocated memory driver_libep(0x101b13a8)

libep_constructor[DECT]: Allocated memory libep(0x101b28e0)

libep_constructor[DECT]: Type driver(1)

libep_constructor[DECT]: Open /dev/dect

libep_constructor[DECT]: Open /dev/dectCmd

libep_constructor: DRIVER_LEP_FLAGS [ set DEV_OPEN]

libep_constructor: DRIVER_LEP_FLAGS [ DEV_OPEN, set INDEX_INIT]

libep_constructor: End

driver_libep_cnf: Begin

driver_libep_cnf-201: (STACK->DRIVER-DECT: LEP_CNF_LOG] Libep(0x101b28e0) -> Not implemented yet

driver_libep_init: Begin

driver_libep_init: DRIVER_LEP_FLAGS [ DEV_OPEN, INDEX_INIT, set INITIALIZE]

driver_libep_init[DECT]: Wait for Initialize DECT on libep(0x101b28e0)

driver_libep_init[DECT]: Register FD(69)

driver_libep_init: DRIVER_LEP_FLAGS [ INITIALIZE, DEV_OPEN, INDEX_INIT, set REGISTER_FD]

driver_libep_init: End

driver_libep_cnf: Begin

driver_libep_cnf(0x101b28e0): [STACK->DRIVER-DECT: LEP_CNF_COUNTRY]

driver_libep_cnf-175: Cnf country on DECT -> Not implemented yet !

driver_libep_cnf: End

rtp_constructor: Allocated rtp_driver

rtp_constructor: Open /dev/rtp

rtpVoip_cmd: Begin cmd(6)

rtpVoip_cmd: End

driver_libep_on_fxs_fd_activity: Begin

driver_libep_on_fxs_fd_activity(0x101aaa98): [EVT->FXS: DSPIPC_RESET_ALL_PORTS_DONE]

driver_libep_on_fxs_fd_activity: DRIVER-STACK-FLAGS [ set FXS_INITIALIZE]

driver_libep_on_fxs_fd_activity: End

driver_libep_on_dect_fd_activity: Begin

driver_libep_on_dect_fd_activity(0x101b28e0): [EVT->DECT: DECT_GLOBAL_INIT_DONE]

dectUsb_applMapBase: FAILURE -> DECTUSB: Get List Handset

driver_libep_on_dect_fd_activity: FAILURE -> Dect get map base

driver_libep_on_fxs_fd_activity: Begin

driver_libep_on_fxs_fd_activity(0x101aaa98): [EVT->FXS: SLIC_OFFHOOK_EVENT] on port(1)

driver_get_all_context_with_fxs_index:-1310): Return FAILURE -> Bad channel(1) max(1)

*********************** Starting script /etc/rc1.d/S99printkoff at: 156.10 7.44

Setting printk off

Next bootmode set to : system (ok)

Sysinit done.



Please press Enter to activate this console. WARNING: could not resolve primary radius accress server iiiii.mobile.orange.fr !

[p2] secondary radius access server: oooooo.mobile.orange.fr



LIVEBOX login: WARNING: could not resolve secondary radius accress server 32333.mobile.orange.fr !

[p2] primary radius access server port: 1812

[p2] secundary radius access server port: 1812

[p2] radius shared secret: xxxxx

info, Executing cmd : iptables -A FORWARD_hotspot -j DROP

info, Executing cmd : /usr/sbin/ip ru del prio 40 from 0.0.0.0

RTNETLINK answers: No such process

getting if flags: No such device

foo 1

^@þ^@Ÿ^@$^@^^^@þ



Please press Enter to activate this console.

LIVEBOX login:

Salut Benoit,

As tu pu avancer sur la bestiole ?
Have reach something more on it ?

@+

The discussion might have continued from here.