Topic: how about wds bridge and Jumbo frame support

The content of this topic has been archived on 24 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Page 1 of 1

Post #1

okulski

9 Dec 2007, 19:05

i have 2 dlink2100 configured as WDS bridge

ping with lenght

32 ok
1400 ok
1500 not ok
3000 not ok

how i make thise bridge to work with Jumbo frame?

Post #2

okulski

10 Dec 2007, 18:17

anythin have any idea?

Post #3

okulski

11 Dec 2007, 19:16

please help

i need 5113 meters bridge with pass VLAN JUMBO packets

Post #4

okulski

3 Jan 2008, 08:15

hi i found this about jumbo

i need only

ifconfig eth0 mtu 9000
(for 1 eth0 or for eth0 br-lan and all interfaces)

then edit network script configuration

and apply changes

/etc/init.d/networking restart

i have thise

after try "ifconfig eth0 mtu 9000" command

ifconfig: SIOCSIFMTU: Invalid argument

when i set mtu more than 1500 i see "ifconfig: SIOCSIFMTU: Invalid argument" message

The discussion might have continued from here.

Page 1 of 1