OpenWrt Forum Archive

Topic: Kamikaze 7.09 on WRT54GL

The content of this topic has been archived on 22 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

I had to reset this router bcoz of configuration problem. Now I can get into telnet session.
It gives the prompt as

root@<none>:#

when I give the command passwd
I type the password . but then it gives the error

passwd: cannot update password file /etc/passwd


How to fix this problem. on the router I can see Power and DMZ are continuously blinking.

Check if the passwd file has writing access rights.

The discussion might have continued from here.