OpenWrt Forum Archive

Topic: VLAN settings and WPA with Netgear WGT634U and Kamikaze 7.07

The content of this topic has been archived on 9 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Hi everyone!

Apparently the VLAN got reversed with the current build. At least my WAN interface is on what used to be port 4 earlier on. Can someone confirm this?

Unfurtunatly I am still struggeling with the WPA. I did install wpa_supplicant, but wireless comes up in unencrypted mode only. The wireless settings should be ok, since I restored the backups from an earlier build. Any thoughts where I could check the logs to see what's going wrong?

Cheers,
schuon

wpa_supplicant is for the router being a wireless wpa CLIENT.
For the server you need hostapd.

stupid me, thanks a lot!

The discussion might have continued from here.