I mistakenly posted this to the White Russian forum, so I'm posting it again here. I am working on porting Kamikaze to the Routerboard 100 series of boards by Microtik. Using a patch from Microtik for the 2.4.31 kernel, I can get the system up and booting. However there are still several issues I need to resolve:
1) Some of my packages are not getting adding to my filesystem tarball. Specifically ebtables is getting built and generating an ipkg, but the modules don't show in my build_mipsel/root directory.
2) I don't have any device nodes in /dev I have created those by hand in order to get the system to boot. Am I supposed to be using devfs to create them or is there a script that does it or do I need to write my own script? I don't see anything in the startup scripts that would startup devfsd.
3) I don't get a serial console. rcS seems to hang after all the startup scripts finish and the output gets passed to logger. If I comment out the logger and start /bin/ash from rcS, I get a console. If I don't run ash from rcS, it just hangs and never returns to inittab.